Hull Components
-
Yamaha Engine Keepers
Tired of expensive and excessive motor mount failure in your SJ? Kenney Keepers retain the engine in place, while still allowing normal-use movement of factory or aftermarket engine mounts. Keeps drive couplers from separating and shearing. Updated design now available in all color options.
Learn More -
Water Bypass Fitting Pro
Blowsion Pro Water Bypass Fittings increase engine performance by diverting some of the water from the cylinder head to the bypass fitting, rather than forcing all of the water through the exhaust system. Fits 3/8" ID Cooling Hoses.
Learn More -
Water Bypass Fitting 90-Degree
Blowsion Billet 90-Degree Water Bypass fittings. Fits 3/8" ID Cooling Hoses. Offered in Anodized Clear, Black, Green, Red, Blue and Orange. All Colors In stock!
Learn More -
Water Bypass Fitting 45-Degree
These Blowsion machined bypass fittings are angled at 45 degrees of flow. Fits 3/8" ID Hose. Offered in Anodized Clear, Black, Red, Blue, Orange and Green.
Learn More -
Undermatting Foam - 9mm Plush
48" x 17.5" section of 9mm thick plush (softer) foam undermat. This our softest underpad. PLUSH offers greater comfort and compression recovery for extreme riders.
Part Number: 04-02-328
Learn More -
Undermatting Foam - 5mm Standard
39" x 19" section of White 5mm thick Standard foam undermat. Add extra cushion with this standard 5mm underpad. Easily Sand-able for custom shaping of footwell areas.
Part Number: 04-02-326
Learn More -
Undermatting Foam - 26mm Plush
48" x 17.5" section of 26mm thick plush (softer) foam undermat. This our softest underpad. PLUSH offers greater comfort and compression recovery for extreme riders.
Part Number: 04-02-330
Learn More -
Undermatting Foam - 18mm Plush
48" x 17.5" section of 18mm thick plush (softer) foam undermat. This our softest underpad. PLUSH offers greater comfort and compression recovery for extreme riders.
Part Number: 04-02-331
Learn More -
Super Glue - Extra Thick 1oz
This is the FINAL answer for keeping your stitched and Hydro Turf mat kit edges stuck down. Use to seam edges permanently. Once dry it creates seamless perfection.
Part Number: 06-03-151
Learn More -
Side Rail Turf Kit - Yamaha SJ / FX1 / KAW 650/750 / Rickter
Blowsion Custom Cut Side Rail Turf Kit. Fits all years Yamaha Superjet, FX1, Polaris Octane, Rickter and Kawasaki 650 and 750 Stand up Models. Improve the traction and looks on the side rails of your ski with our custom fit side rail covering kits. Side Rail Turf Kits Include enough material to cover the front bumper, sides, and rear corners of the side rail. Side rail kits bond directly to the fiberglass. All OEM/Stock plastic will need to be removed prior to application of side rail turf kit. For most applications a Quart of Mat Glue is recommended for installation. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-324
Learn More -
Side Molding 1-3/8" - Black (25FT)
Extended Length. Made out of injection molded flexible urethane. Attaches to your watercraft with its own adhesive backing. Each kit includes special pre-wipe cleaner to promote maximum adhesion and durability. The 1-3/8" Inch size is excellent for most sitdown PWC as well as all years of Kawasaki SXR and Yamaha Super Jet. Length: 25ft
Part Number: 04-02-307
Learn More -
Side Molding 1-3/8" - Black
Made out of injection molded flexible urethane. Attaches to your watercraft with its own adhesive backing. Each kit includes special pre-wipe cleaner to promote maximum adhesion and durability. The 1-3/8" Inch size is excellent for most sitdown PWC as well as all years of Kawasaki SXR and Yamaha Super Jet.
Part Number: 04-02-300
Learn More -
Side Molding 1" - Chrome
Made out of injection molded flexible urethane. Attaches to your watercraft with its own adhesive backing. Each kit includes special pre-wipe cleaner to promote maximum adhesion and durability. The 1" inch size is perfect for all years KAWI SXi/SXi Pro and all years Super Jet.
Part Number: 04-02-303
Learn More -
Side Molding 1" - Black
Made out of injection molded flexible urethane. Attaches to your watercraft with its own adhesive backing. Each kit includes special pre-wipe cleaner to promote maximum adhesion and durability. The 1" size is perfect for all years Kawasaki 750SX, SXi, SXi-Pro and All years Yamaha Superjet.
Part Number: 04-02-302
Learn More -
Rule Bilge Pump Strainer Base
Replacement Fuel Resistant Rule Bilge Pump Strainer Base. Compatible with All Rule 360-1100GPH Models.
Part Number: 06-01-311
Learn More -
RRP Rickter Hood Forks
RRP Rickter Adjustable Hood Prongs. Machined from billet aluminum with stainless steel pins. Adjustable in their mounting position so you can dial in that hood seal pressure. Fits 1996 and Newer Yamaha Superjets, Rickters, and other aftermarket hulls. Available in anodized Black. Sold as Pair (2)
Part Number: 04-04-377
Learn More