Hull Components
-
RRP Adjustable Hood Latch
The RRP Adjustable Hood Latch is made from billet aluminium 6061 t6. This adjustable hood latch gives you the possibility to adjust the amount of pressure applied on the hood seal in a second. Extremely strong design eliminating failure of the latch and danger of losing hood and the ability of sinking the ski. Available in Red, Black, Blue, Green.
Learn More -
Rotary Bilge Switch - 3 Position
Blowsion Rotary waterproof bilge switches are corrosion resistant and have withstood the most abuse we can give them. Pair with the Blowsion Dash Fitting for best protection.
Part Number: 06-01-201
Learn More -
Recessed Dash Mount
New! Blowsion Recessed Dash Mount. Fed up of breaking expensive Bilge Switches and Primer Bulbs? The Blowsion Team has a solution. The Recessed Dash Mount is perfect for mounting your switches and primers. The Mount enables the switch/primer to sit flush eliminating the risk of being knocked off. On top of that each mount comes with a Brushed Aluminum Anodized Bezel available in 5 color options. Stainless Steel Mounting Hardware and Installation Instructions Included.
Learn More -
One Way Valve Kit - Pro Finish
The pro-finish kit, which allows for a completely sanitized rear outlet, (paint and finish work required).
Part Number: 06-01-028
PLEASE NOTE: This product has been discontinued.Learn More -
OEM Bullet Terminals - 5 Pack
Replacement OEM bullet connectors now available at Blowsion. Kit includes 5 Male and Female terminals with Insulators. Perfect for those super sanitary bilge kit installations or replacements for Electrical box connections.
Part Number: 01-04-417
Learn More -
OEM Bullet Terminals - 20 Pack
Replacement OEM bullet connectors now available at Blowsion. Kit includes 20 Male and Female terminals with Insulators. Perfect for those super sanitary bilge kit installations or replacements for Electrical box connections.
Part Number: 01-04-418
Learn More -
Mounting Block (4 inch)
Hydro-Turf Mounting Blocks can be used for a variety of applications including: handle pole pads / lifters, footholds and mounting exhausts. Blocks are 4" thick (4.7" x 5.1"). Add 3M self-adhesive for $5.
Learn More -
Mounting Block (2 inch)
Hydro-Turf Mounting Blocks can be used for a variety of applications including: handle pole pads / lifters, footholds and mounting exhausts. Blocks are 2" thick (4.7" x 5.1"). Add 3M self-adhesive for $5.
Learn More -
Mat Kit - Stock Tray - Yamaha Superjet (1990-1995)
Blowsion Custom Cut Mat Kit. Glue it On! Fits all 1990-1995 Yamaha Superjet Models. Includes bottom, tray sides, dash and undermat foam. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-061
Learn More -
Mat Kit - Stitched - Kicker Footwells - Yamaha Superjet (1990-1995)
Glue On! Includes bottom, sides, dash and undermat foam. Fits all years 1990-1995 Yamaha Superjet Models with Kicker Composite Footwells. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-070
Learn More -
Mat Kit - Stitched - Freestyle Lifters - Yamaha Superjet (1990-1995)
Glue On! Includes bottom, sides, dash and undermat foam. Fits all years 1990-1995 Yamaha Superjet Models. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-071
Learn More -
Mat Kit - Stitched - Digger Footwells - Yamaha Superjet (1990-1995)
Glue On! Includes bottom, sides, dash and undermat foam. Fits all years 1990-1995 Yamaha Superjet Models with Digger Composite Footwells. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-069
Learn More -
Mat Kit - Kickers - Yamaha Superjet (1990-1995)
Blowsion Custom Cut Mat Kit. Glue it On! Fits all 1990-1995 Yamaha Superjet Models with Kicker footwells. Includes bottom, tray sides, dash, footwell mat pieces, and undermat foam. Kicker Footwells not included. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-064
Learn More -
Mat Kit - Diggers - Yamaha Superjet (1990-1995)
Blowsion Custom Cut Mat Kit. Glue it On! Fits all 1990-1995 Yamaha Superjet Models. Includes bottom, tray sides, dash, footwell mat pieces, and undermat foam. Digger Footwells not included. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-063
Learn More -
Hydro-Turf Sheet - Waffle
Hydro Turf 40" x 49" Waffle Groove sheet material. Blowsion stocks all available colors listed. We are overflowing with turf!
See our special formulated solvent-based Mat Glue for Installation.
Learn More