Hull Components
-
Yamaha Engine Keepers
Tired of expensive and excessive motor mount failure in your SJ? Kenney Keepers retain the engine in place, while still allowing normal-use movement of factory or aftermarket engine mounts. Keeps drive couplers from separating and shearing. Updated design now available in all color options.
Learn More -
Water Bypass Fitting Pro
Blowsion Pro Water Bypass Fittings increase engine performance by diverting some of the water from the cylinder head to the bypass fitting, rather than forcing all of the water through the exhaust system. Fits 3/8" ID Cooling Hoses.
Learn More -
Water Bypass Fitting 90-Degree
Blowsion Billet 90-Degree Water Bypass fittings. Fits 3/8" ID Cooling Hoses. Offered in Anodized Clear, Black, Green, Red, Blue and Orange. All Colors In stock!
Learn More -
Water Bypass Fitting 45-Degree
These Blowsion machined bypass fittings are angled at 45 degrees of flow. Fits 3/8" ID Hose. Offered in Anodized Clear, Black, Red, Blue, Orange and Green.
Learn More -
Undermatting Foam - 5mm Standard
39" x 19" section of White 5mm thick Standard foam undermat. Add extra cushion with this standard 5mm underpad. Easily Sand-able for custom shaping of footwell areas.
Part Number: 04-02-326
Learn More -
Super Glue - Extra Thick 1oz
This is the FINAL answer for keeping your stitched and Hydro Turf mat kit edges stuck down. Use to seam edges permanently. Once dry it creates seamless perfection.
Part Number: 06-03-151
Learn More -
Side Rail Turf Kit - Yamaha SJ / FX1 / KAW 650/750 / Rickter
Blowsion Custom Cut Side Rail Turf Kit. Fits all years Yamaha Superjet, FX1, Polaris Octane, Rickter and Kawasaki 650 and 750 Stand up Models. Improve the traction and looks on the side rails of your ski with our custom fit side rail covering kits. Side Rail Turf Kits Include enough material to cover the front bumper, sides, and rear corners of the side rail. Side rail kits bond directly to the fiberglass. All OEM/Stock plastic will need to be removed prior to application of side rail turf kit. For most applications a Quart of Mat Glue is recommended for installation. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-324
Learn More -
Side Molding 1-3/8" - Black (25FT)
Extended Length. Made out of injection molded flexible urethane. Attaches to your watercraft with its own adhesive backing. Each kit includes special pre-wipe cleaner to promote maximum adhesion and durability. The 1-3/8" Inch size is excellent for most sitdown PWC as well as all years of Kawasaki SXR and Yamaha Super Jet. Length: 25ft
Part Number: 04-02-307
Learn More -
Side Molding 1-3/8" - Black
Made out of injection molded flexible urethane. Attaches to your watercraft with its own adhesive backing. Each kit includes special pre-wipe cleaner to promote maximum adhesion and durability. The 1-3/8" Inch size is excellent for most sitdown PWC as well as all years of Kawasaki SXR and Yamaha Super Jet.
Part Number: 04-02-300
Learn More -
Side Molding 1" - Chrome
Made out of injection molded flexible urethane. Attaches to your watercraft with its own adhesive backing. Each kit includes special pre-wipe cleaner to promote maximum adhesion and durability. The 1" inch size is perfect for all years KAWI SXi/SXi Pro and all years Super Jet.
Part Number: 04-02-303
Learn More -
Side Molding 1" - Black
Made out of injection molded flexible urethane. Attaches to your watercraft with its own adhesive backing. Each kit includes special pre-wipe cleaner to promote maximum adhesion and durability. The 1" size is perfect for all years Kawasaki 750SX, SXi, SXi-Pro and All years Yamaha Superjet.
Part Number: 04-02-302
Learn More -
Rotary Bilge Switch - 3 Position
Blowsion Rotary waterproof bilge switches are corrosion resistant and have withstood the most abuse we can give them. Pair with the Blowsion Dash Fitting for best protection.
Part Number: 06-01-201
Learn More -
Recessed Dash Mount
New! Blowsion Recessed Dash Mount. Fed up of breaking expensive Bilge Switches and Primer Bulbs? The Blowsion Team has a solution. The Recessed Dash Mount is perfect for mounting your switches and primers. The Mount enables the switch/primer to sit flush eliminating the risk of being knocked off. On top of that each mount comes with a Brushed Aluminum Anodized Bezel available in 5 color options. Stainless Steel Mounting Hardware and Installation Instructions Included.
Learn More -
One Way Valve Kit - Pro Finish
The pro-finish kit, which allows for a completely sanitized rear outlet, (paint and finish work required).
Part Number: 06-01-028
PLEASE NOTE: This product has been discontinued.Learn More -
OEM Bullet Terminals - 5 Pack
Replacement OEM bullet connectors now available at Blowsion. Kit includes 5 Male and Female terminals with Insulators. Perfect for those super sanitary bilge kit installations or replacements for Electrical box connections.
Part Number: 01-04-417
Learn More -
OEM Bullet Terminals - 20 Pack
Replacement OEM bullet connectors now available at Blowsion. Kit includes 20 Male and Female terminals with Insulators. Perfect for those super sanitary bilge kit installations or replacements for Electrical box connections.
Part Number: 01-04-418
Learn More