Hull Components
-
WORX Hull Washer Kit - WR06018-31 - Seadoo Spark
WORX Racing Seadoo Spark Hull Washer Kit (31pc). Replace the stock plastic hull washers which will break and deteriorate easily with our Stainless Steel 316 Spark Hull Washers. This kit is a 31 piece kit that will replace all of the washers.
Part Number: WR06018-31
Learn More -
WORX Hull Washer Kit - WR06018-21 - Seadoo Spark
WORX Seadoo Spark Hull Washers. Designed specifically to fit the new Seadoo Spark. Replace the stock plastic hull washers which will break and deteriorate easily with our Stainless Steel 316 Spark Hull Washers. This kit is a 21 piece kit that will replace the center motor section.
Part Number: WR06018-21
Learn More -
Water Bypass Fitting Pro 1/2
Blowsion 1/2 inch machined aluminum pro bypass fittings. Fits 1/2" ID Cooling Hose (Used in Most 4-Stroke SXR1500 / Runabout Applications). Available in all colors!
Learn More -
Water Bypass Fitting 45-Degree 1/2
These Blowsion machined bypass fittings are angled at 45 degrees of flow. Fits 1/2" ID Cooling Hose (Used in Most 4-Stroke SXR1500 / Runabout Applications). Offered in Anodized Clear or Black.
Learn More -
Vacate Valve - SeaDoo 2010+
A simple installation drain valve alternative for the OEM drain plugs in Sea-Doo model Watercraft. Fits all 2010+ Sea-Doo PWC Models. Available in Black or Clear. Sold Each.
Learn More -
Rule Bilge Pump Strainer Base
Replacement Fuel Resistant Rule Bilge Pump Strainer Base. Compatible with All Rule 360-1100GPH Models.
Part Number: 06-01-311
Learn More -
Rotary Bilge Switch - 3 Position
Blowsion Rotary waterproof bilge switches are corrosion resistant and have withstood the most abuse we can give them. Pair with the Blowsion Dash Fitting for best protection.
Part Number: 06-01-201
Learn More -
Mounting Block (4 inch)
Hydro-Turf Mounting Blocks can be used for a variety of applications including: handle pole pads / lifters, footholds and mounting exhausts. Blocks are 4" thick (4.7" x 5.1"). Add 3M self-adhesive for $5.
Learn More -
Mounting Block (2 inch)
Hydro-Turf Mounting Blocks can be used for a variety of applications including: handle pole pads / lifters, footholds and mounting exhausts. Blocks are 2" thick (4.7" x 5.1"). Add 3M self-adhesive for $5.
Learn More -
Hydro-Turf Sheet - Waffle
Hydro Turf 40" x 49" Waffle Groove sheet material. Blowsion stocks all available colors listed. We are overflowing with turf!
See our special formulated solvent-based Mat Glue for Installation.
Learn More -
Hydro-Turf Sheet - Dual Layer - Waffle
Dual Layer 2-Tone Sheets of 1/4" (6mm) Hydro-Turf with Cut Waffle Grooves. Available in any two of the color combinations Hydro Turf offers on the below drop down menus.
See our special formulated solvent-based Mat Glue for Installation.
Learn More -
Hydro-Turf Sheet - Dual Layer - Diamond
Dual Color Sheets of 1/4" (5.5mm) Hydro-Turf with Cut Diamond Grooves. Available in any two of the color combinations Hydro Turf offers on the below drop down menus.
See our special formulated solvent-based Mat Glue for Installation.
Learn More -
Hydro-Turf Sheet - Diamond
Hydro-Turf 40" x 62" Diamond Groove sheet material. Blowsion stocks all available colors and groove options listed. We are overflowing with turf!
See our special formulated solvent-based Mat Glue for Installation.
Learn More -
Hydro-Turf Lifter Wedges
Inexpensive traction option. Gain control of your ski or runabout by applying these lifter wedges to your tray sides or inner and outer gunnels. Available in two length options. Sold as Pair (2). Color: Black
Learn More -
DAKINE Proform Footstrap
The Proform footstrap is the most flexible of DAKINE model footstraps and is commonly the most preferred for riders who ride barefoot.
Part Number: 04-02-336
Learn More -
DAKINE Primo Footstrap
Dakine Primo Freeriding foot straps can be easily adjusted on or off the water for all foot sizes and riders. Great for riders looking for that Joe Kenney or Pierre Maxient wave-shred style of surfriding.
Part Number: 04-02-335
Learn More