Hull Components
-
Water Bypass Fitting Pro
Blowsion Pro Water Bypass Fittings increase engine performance by diverting some of the water from the cylinder head to the bypass fitting, rather than forcing all of the water through the exhaust system. Fits 3/8" ID Cooling Hoses.
Learn More -
Water Bypass Fitting 90-Degree
Blowsion Billet 90-Degree Water Bypass fittings. Fits 3/8" ID Cooling Hoses. Offered in Anodized Clear, Black, Green, Red, Blue and Orange. All Colors In stock!
Learn More -
Water Bypass Fitting 45-Degree
These Blowsion machined bypass fittings are angled at 45 degrees of flow. Fits 3/8" ID Hose. Offered in Anodized Clear, Black, Red, Blue, Orange and Green.
Learn More -
Undermatting Foam - 9mm Plush
48" x 17.5" section of 9mm thick plush (softer) foam undermat. This our softest underpad. PLUSH offers greater comfort and compression recovery for extreme riders.
Part Number: 04-02-328
Learn More -
Undermatting Foam - 5mm Standard
39" x 19" section of White 5mm thick Standard foam undermat. Add extra cushion with this standard 5mm underpad. Easily Sand-able for custom shaping of footwell areas.
Part Number: 04-02-326
Learn More -
Undermatting Foam - 26mm Plush
48" x 17.5" section of 26mm thick plush (softer) foam undermat. This our softest underpad. PLUSH offers greater comfort and compression recovery for extreme riders.
Part Number: 04-02-330
Learn More -
Undermatting Foam - 18mm Plush
48" x 17.5" section of 18mm thick plush (softer) foam undermat. This our softest underpad. PLUSH offers greater comfort and compression recovery for extreme riders.
Part Number: 04-02-331
Learn More -
Super Glue - Extra Thick 1oz
This is the FINAL answer for keeping your stitched and Hydro Turf mat kit edges stuck down. Use to seam edges permanently. Once dry it creates seamless perfection.
Part Number: 06-03-151
Learn More -
Side Rail Turf Kit - Yamaha SJ / FX1 / KAW 650/750 / Rickter
Blowsion Custom Cut Side Rail Turf Kit. Fits all years Yamaha Superjet, FX1, Polaris Octane, Rickter and Kawasaki 650 and 750 Stand up Models. Improve the traction and looks on the side rails of your ski with our custom fit side rail covering kits. Side Rail Turf Kits Include enough material to cover the front bumper, sides, and rear corners of the side rail. Side rail kits bond directly to the fiberglass. All OEM/Stock plastic will need to be removed prior to application of side rail turf kit. For most applications a Quart of Mat Glue is recommended for installation. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-324
Learn More -
Side Molding 5/8" - Chrome
Made out of injection molded flexible urethane. Attaches to your watercraft with its own adhesive backing. Each kit includes special pre-wipe cleaner to promote maximum adhesion and durability. The 5/8" size is perfect for all years Kawasaki JS 440/550, Kawasaki 750SXi and Yamaha FX1.
Part Number: 04-02-305
Learn More -
Side Molding 5/8" - Black
Made out of injection molded flexible urethane. Attaches to your watercraft with its own adhesive backing. Each kit includes special pre-wipe cleaner to promote maximum adhesion and durability. The 5/8" size is perfect for all years Kawasaki JS 440/550, Kawasaki 750SXi and Yamaha FX1.
Part Number: 04-02-304
Learn More -
Rule Bilge Pump Strainer Base
Replacement Fuel Resistant Rule Bilge Pump Strainer Base. Compatible with All Rule 360-1100GPH Models.
Part Number: 06-01-311
Learn More -
RRP Adjustable Hood Latch Assembly
The New Rickter-RRP Hood Latch has been produced for use on all, Rickter standup hulls, Rickter MX1, Yamaha Superjets and any aftermarket hulls using Yamaha based latch systems. This new complete latch features the Rickter-RRP adjustable hood latch allowing you to easily adjust the pressure applied on the hood seal preventing water intrusion. The adjustable hood latch comes complete with all the hardware needed for installation. Available in 2 anodized colors.
Learn More -
RRP Adjustable Hood Latch
The RRP Adjustable Hood Latch is made from billet aluminium 6061 t6. This adjustable hood latch gives you the possibility to adjust the amount of pressure applied on the hood seal in a second. Extremely strong design eliminating failure of the latch and danger of losing hood and the ability of sinking the ski. Available in Red, Black, Blue, Green.
Learn More -
Rotary Bilge Switch - 3 Position
Blowsion Rotary waterproof bilge switches are corrosion resistant and have withstood the most abuse we can give them. Pair with the Blowsion Dash Fitting for best protection.
Part Number: 06-01-201
Learn More -
Recessed Dash Mount
New! Blowsion Recessed Dash Mount. Fed up of breaking expensive Bilge Switches and Primer Bulbs? The Blowsion Team has a solution. The Recessed Dash Mount is perfect for mounting your switches and primers. The Mount enables the switch/primer to sit flush eliminating the risk of being knocked off. On top of that each mount comes with a Brushed Aluminum Anodized Bezel available in 5 color options. Stainless Steel Mounting Hardware and Installation Instructions Included.
Learn More