Bilge
-
Duckbill One Way - Replacement
Replaces your worn out rubber duckbill. Includes color-matched Zip Tie.
Part Number: 06-01-010
Learn More -
Duckbill One Way - Kawasaki
Billet SXR Duckbill- eliminates water via the OEM Kawi SXR drain plug orifice at the rear of the ski. This is the most economical way to keep the SXR engine compartment dry. Not a cheap universal mount, this drain bladder is billet and designed specifically for the Kawasaki SXR 800.
Part Number: 06-01-015
Learn More -
CAS Billet Aluminum Flange Only
Available for riders wanting to use the end flange only for custom scupper and rear exhaust installations etc. The new billet flange assembly is the premium design setup and allows use of the Blowsion billet exhaust outlet so vain riders can sanitize both sides of the rear of their watercraft. Fits all years Super Jet, KAWI 750 and SXR 800, KAWI 650, and Polaris Octane. Anodized Clear.
Part Number: 06-01-023
Learn More -
Blowsion Dash Fitting
Blowsion machined aluminum dash fittings are used to recess mount rotary bilge switches and/or primer bulbs in the dash of your ski. Available in Black, Blue, Red, Green, Orange, Clear, Purple and Teal colors.
Learn More -
Blowsion CAS Billet Aluminum One Way Valve Scupper
Our new CAS (cool as S*%!) flow valve design prevents water getting in during tail stands, wave jumping, or all out buoy shredding. The new billet flange assembly allows use of our billet exhaust outlet so vain riders can sanitize both sides of the rear of their ski. Fits all years Yamaha Superjet, Kawasaki 650, Kawasaki 750, Kawasaki SXR 800, Polaris Octane, Rickter XFS, Rickter XFR, Rickter EVO, Rickter Edge and Most Aftermarket Hulls.
Part Number: 06-01-022
Learn More -
Blowsion Billet Exhaust Nozzle - Yamaha Superjet
Blowsion Billet Exhaust Nozzle for all 1996-2020 Yamaha Superjet Models. Updated carefully for 2008 to fit the new narrower Super Jet bottom hull as well as 1996-2007 models. This is one ultra off the hook nozzle. Function and fit are Blowsion perfect. Fits over OEM exhaust flange. Vanity rules on these beauties. Available in all colors!
Learn More -
Bilge Switch Replacement - 9ft Wire
Finally- a replacement switch and 9 feet of cable for the always popular handlebar mount switches.
Part Number: 06-01-215
Learn More -
Bilge Switch / Primer Mounting Plate
This cool universal anodized black aluminum mounting plate allows easy mounting of the rotary bilge switch as well as primer bulb on the dash. Specifically designed for the SXR but will work with other models. Inside mounting with the correct bulb style primer hole and rotary bilge switch ID means a sanitary install in minutes with no grinders or tubes of silicone needed.
Part Number: 04-06-002
Learn More -
Bilge Switch - Start Stop Switch Mount - Yamaha
Blowsion Bilge Switch Stop / Start Switch Mount - Yamaha. This sano billet switch assembly mounts directly to the bottom of the OEM Start / Stop switch housing of all Yamaha watercraft.
Part Number: 06-01-214
Learn More -
Bilge Switch - Start Stop Switch Mount - Kawasaki
This Sano Bilge Switch Mounts Directly to the Bottom of the OEM Start / Stop Switch Housing on most Kawasaki Watercraft. Does not work on JS300, JS650 or X2 models.
Part Number: 06-01-213
Learn More -
Bilge Switch - Handlebar Mount - Universal
Universal Handle Bar Mount Bilge Switch. Fits any watercraft handle bars on the market. Anodized Black.
Part Number: 06-01-212
Learn More -
Bilge Pump Single Mount - Superjet
Single bilge pump mounting bracket for all 1994 and newer Yamaha SuperJet Models. The bracket locates the bilge pump within millimeters from the base of the Super Jet hull. Easy built in installation, no messy adhesives. All hardware included. Material: Aluminum. Color: Anodized Black.
Part Number: 06-01-152
Learn More -
Bilge Pump Single Mount - Kawasaki
Single bilge pump mounting bracket for Kawasaki Sxi Pro and KAWASAKI SXR 800. Single pump mounting bracket for Kawasaki Sxi Pro and KAWASAKI SXR 800. The bracket locates the pump within millimeters from the base of the KAWI hull. Easy built in installation, no messy adhesives. Material: Aluminum. Color: Anodized Black.
Part Number: 06-01-102
Learn More -
Bilge Pump Mount - Yamaha WaveBlaster
The Blowsion Bilge Pump Mount is designed to mount the Rule Bilge Pump (Sold Separately). Includes rivets to mount bilge pump strainer to bracket. Fits 1993-1996 Yamaha WaveBlaster 1 Models. Material: Aluminum. Color: Anodized Black.
Part Number: 06-01-107
Learn More -
Bilge Pump Mount - Kawasaki SXR 1500
The Blowsion Bilge Pump Mount is designed to mount the Rule Bilge Pump (Sold Separately). The bracket mounts to the lower two bolts of the driveshaft bearing carrier. Includes rivets to mount bilge pump strainer to bracket. Fits all Kawasaki SXR 1500 Models. Material: Aluminum. Color: Anodized Black.
Part Number: 06-01-104
Learn More -
Bilge Pump Mount - Kawasaki JS440/550
The Blowsion Bilge Pump Mount is designed to mount the Rule Bilge Pump (Sold Separately). Includes rivets to mount bilge pump strainer to bracket. Fits all Kawasaki JS440 and JS550 Models. Material: Aluminum. Color: Anodized Black.
Part Number: 06-01-105
Learn More