Engine Performance

Brand New OEM Yamaha 62T Side Draft Cases available by Blowsion.

Part Number: 62T-15100-00-00

Genuine Mikuni SBN Diaphram Assembly. Fits all Mikuni SBN 38mm, 40mm, 44mm, 46mm and NOVI 48mm Carburetors. Diagram #16.

Part Number: 01-02-542

The VForce 3 reed valve has been the first choice of watercraft racers everywhere. Due to the increased airflow of a VForce Reed Valve System there is a very tangible increase in overall responsiveness. Fits Yamaha Superjet 701 62T Case and 760.

Part Number: 01-02-306

The VForce reed valve has been the first choice of watercraft racers everywhere. Due to the increased airflow of a VForce Reed Valve System there is a very tangible increase in overall responsiveness. Fits Yamaha Superjet 701 62T Case and 760.

Part Number: 01-02-302

Universal Fuel Pickup Filter. Add some of these for extra fuel filtration and also keeps the fuel in your lines when going upside down.

Part Number: 01-02-449

Brass Press In Straight Pulse Line Nipple Fitting 1/4" Hose Barb. Use for dual carburetor setups with dual fuel pumps where a second pulse line is required.

Part Number: 01-02-530

Blowsion Adjustable SHCS Factory Pipe Headpipe Water Screw Kit - Standard Size. Socket Head Cap Screw Design provides adjustments for tuning. This kit is a direct replacement for those seized up water adjusting screws. Compatible with all Factory Headpipes. Kit Includes 3 screws, 3 nuts and hex key.

Part Number: 01-01-743

The GET C1 Engine Hour Meter keeps track of your engine's service life. The meter fits to any bike in minutes without any wiring needed and detects the engine by identifying wave frequencies that flow through the surface it sits on.

Part Number: 06-04-092

The Blowsion Fuel Tank is specially designed to work in conjunction with the aftermarket lay down style exhaust systems that don't work with the OEM Yamaha Fuel Tank (RRP, TNT, PowerFactor). One of the main problems with using these exhaust systems is the battery has to be relocated which can cause quite the problem. The Blowsion Fuel Tank is unique as it has a cut out in the front of the tank that enables you to relocate your battery with ease. Fuel Capacity: 4 Gallons.

The 1/4" Quick Disconnect / Fuel Restrictor can be used as fuel line quick disconnect and/or for fuel restriction. Pre-tapped and threaded to accept Mikuni Main Jet (Jets not included). Includes stainless steel hose clamps. Now Available in all colors!

WSM Aftermarket Voltage Regulator for All Yamaha Superjet, FX1, and WaveBlaster 1 Models. Manufactured to OEM specifications

Part Number: 004-225

Blowsion Billet Strap Hook Base. With the ever evolving aftermarket hulls and different engine configurations available in today's market the Blowsion Mechanic team consistently ran into problems with having to relocate individual components E.G Exhaust, Battery and Mounting Straps etc... So they went to work and designed a Billet Aluminum Strap Hook Base. Available in all colors! Strap Hook Sold Separately.

Billet aluminum throttle drum for maximum throttle adjustments. Machined from 6061-T6 aluminum and anodized for corrosion protection. Features 9 different hole locations for the throttle cable to attach. Now available in 5 different colors!

NEW! - The Blowsion Billet Strap Hook. Replaces OEM Yamaha style waterbox, battery, and fuel tank strap hooks. Fits ALL years Yamaha Superjet, Rickter Hulls, Lightweight.DE, and many other aftermarket superjet based hull types. The Blowsion Strap Hook incorporates a removable 3mm set screw that retains the strap in place so that it cannot come off. This innovative little feature works perfectly for the hard to reach strap hooks where the straps have a tendency to come off. Price includes one hook, one M6 x 16mm bolt and a M3 x 6mm bolt. Available in Purple, Red, Black, Green, Orange, Blue and Teal Anodized Colors.

Blowsion Big Bore 850cc Replacement Head O-Ring Kit. Our bulletproof nitrile o-ring kits come with the same quality and durability you have come to know and expect from Blowsion.

Part Number: 01-03-232