Engine Performance
-
Prok Flame Arrestor Universal
Prok Multi-Fit Universal Flame Arrestor. 4" Round x 2" Tall. Prok's high-flow aftermarket air filters feature an internal vortex-shaped cone and rolled intake edge for unrestricted airflow. Prok's Air Filters greatly improve low speed idle and acceleration. Reminder- You will also need our Flame Arrestor Adapters and we also highly recommend Outerwears for a moisture barrier in freeride/freestyle applications.
Part Number: 01-02-021
Learn More -
NGK Spark Plugs - Solid Tip - BR8HS
NGK Spark Plugs - Solid Tip BR8HS. Multi-Ground Electrodes Improve Ignition Capabilities and are Less Sensitive to Increased Voltage Requirements Due to Gap Growth. Designed to Specific Manufacturer Ignition Requirements, NGK's Multi-Ground Plugs Maintain All the Features of Their Standard Plugs. Fits Yamaha 61X/62T/64X Models with OEM Cylinder Heads.
Learn More -
Engine Flush Kit - Triple Outlet
All metal and stainless construction. Easy to use. Just push in to your 45 degree or 90 degree aftermarket aluminum water bypasses. Backflush away!
Part Number: 06-04-002
Learn More -
Aftermarket Starter Bendix - Yamaha/Kawasaki
Aftermarket Starter Bendix in Stock for Both Kawasaki 750/800 and Yamaha 701/760cc Engines.
Part Number: 01-04-157
Learn More -
Blowsion Battery Box - Small
Designed to work in conjunction with smaller battery case sizes. Great for aftermarket hull builds and small Superjet battery replacement. Battery Strap location has been relocated to avoid interference with battery terminals. Also compatible with many other batteries. Check the dimensions of your battery to insure proper fitment. Welded Aluminum Grain Finish. Color: Anodized Black.
Part Number: 01-04-602
Learn More -
OEM Starter Bendix - Yamaha / Kawasaki
OEM Kawasaki Starter Bendix. Fits All Kawasaki and Yamaha Models.
Part Number: 13101-3708 Learn More
-
Mikuni SBN Diaphragm Assembly
Genuine Mikuni SBN Diaphram Assembly. Fits all Mikuni SBN 38mm, 40mm, 44mm, 46mm and NOVI 48mm Carburetors. Diagram #16.
Part Number: 01-02-542
Learn More -
VFORCE 3 Carbon Reed Kit - Kawasaki Twins
The VForce 3 reed valve has been the first choice of watercraft racers everywhere. Due to the increased airflow of a VForce Reed Valve System there is a very tangible increase in overall responsiveness. Fits All Kawasaki 750 and SXR Models.
Part Number: 01-02-307
Learn More -
Fuel Pickup Filter 1/4"
Universal Fuel Pickup Filter. Add some of these for extra fuel filtration and also keeps the fuel in your lines when going upside down.
Part Number: 01-02-449
Learn More -
Pulse Line Fitting 1/4"
Brass Press In Straight Pulse Line Nipple Fitting 1/4" Hose Barb. Use for dual carburetor setups with dual fuel pumps where a second pulse line is required.
Part Number: 01-02-530
Learn More -
FP Headpipe Water Screw Kit - SHCS
Blowsion Adjustable SHCS Factory Pipe Headpipe Water Screw Kit - Standard Size. Socket Head Cap Screw Design provides adjustments for tuning. This kit is a direct replacement for those seized up water adjusting screws. Compatible with all Factory Headpipes. Kit Includes 3 screws, 3 nuts and hex key.
Part Number: 01-01-743
Learn More -
GET C1 Hour Meter
The GET C1 Engine Hour Meter keeps track of your engine's service life. The meter fits to any bike in minutes without any wiring needed and detects the engine by identifying wave frequencies that flow through the surface it sits on.
Part Number: 06-04-092
Learn More -
1/4" Quick Disconnect / Fuel Restrictor
The 1/4" Quick Disconnect / Fuel Restrictor can be used as fuel line quick disconnect and/or for fuel restriction. Pre-tapped and threaded to accept Mikuni Main Jet (Jets not included). Includes stainless steel hose clamps. Now Available in all colors!
Learn More -
WSM Motor Mount - Kawasaki 650/750/SXR
WSM Aftermarket Motor Mount for all Kawasaki 650, 750 (Except ZXI) and SXR 800 Models.
Part Number: 011-105
Learn More -
Keihin Carb Rebuild Kit 38-44MM CDK-II
Aftermarket Keihin Carburetor Rebuild Kit for 38mm, 40mm, 42mm and 44mm CDK-II Carburetors. Fits wide range of 38-44mm Keihin™ CDK-II carbs found on PWC. Includes Viton™ tipped inlet needle.
Part Number: 01-02-492
Learn More -
Blowsion Strap Hook Base
Blowsion Billet Strap Hook Base. With the ever evolving aftermarket hulls and different engine configurations available in today's market the Blowsion Mechanic team consistently ran into problems with having to relocate individual components E.G Exhaust, Battery and Mounting Straps etc... So they went to work and designed a Billet Aluminum Strap Hook Base. Available in all colors! Strap Hook Sold Separately.
Learn More