Intake

Blowsion Fuel Tank Fitting with Rubber Grommet. 1/4 Hose Barb. Compression Fit. Install with 17/32 Drill Bit.

Part Number: 01-02-598

The 1/4" Quick Disconnect / Fuel Restrictor can be used as fuel line quick disconnect and/or for fuel restriction. Pre-tapped and threaded to accept Mikuni Main Jet (Jets not included). Includes stainless steel hose clamps. Now Available in all colors!

Dual Mikuni 44mm SBN Carburetor Kit. Linked and Custom Jetted to your engine specification. Available in 5 color options!

The Blowsion Fuel Tank is specially designed to work in conjunction with the aftermarket lay down style exhaust systems that don't work with the OEM Yamaha Fuel Tank (RRP, TNT, PowerFactor). One of the main problems with using these exhaust systems is the battery has to be relocated which can cause quite the problem. The Blowsion Fuel Tank is unique as it has a cut out in the front of the tank that enables you to relocate your battery with ease. Fuel Capacity: 4 Gallons.

Introducing the new Blowsion Yamaha Fuel Pickup. Designed with the option for use as a single, dual and triple pickup this billet beauty is the lowest profile and lightest weight internal fuel filler available.

Billet aluminum throttle drum for maximum throttle adjustments. Machined from 6061-T6 aluminum and anodized for corrosion protection. Features 9 different hole locations for the throttle cable to attach. Now available in 5 different colors!

Introducing the new Blowsion Kawasaki Fuel Pickup. Designed with the option for use as a single, dual and triple pickup this billet beauty is the lowest profile and lightest weight internal fuel filler available. Even with all three pickups in use you can still internally fill using a regular fuel jug hose. Includes all fuel line, fuel pickup filters and installation hardware. Fits all years Kawasaki 750 and SXR.

Billet Carburetor Adapters for Keihin CDK and CDK II Carbs. Fits 1992-1995 Kawasaki 750sx Single Keihin Carbs. Required for adapting to aftermarket air filters / flame arrestors. Flange Outer Diameter: 2.75 (inches).

Part Number: 01-02-071

Oil block-off plates allow for an easy conversion from factory oil injection to pre-mixing your own fuel. Block-off plates fit all Yamaha 650701/760 and Kawasaki 650/750 Models. Hardware included. Anodized Black.

Part Number: 01-03-812

Fits 8mm choke shaft Keihin dual carburetor. Starting the engine of your personal watercraft is never a problem with a Blowsion primer kit. All brass fittings and bulletproof plunger. Get rid of that worthless factory choke and apply a direct shot of fuel!

Part Number: 01-02-404

Fits 8mm choke shaft Keihin single carburetors. Starting the engine of your personal watercraft is never a problem with a Blowsion primer kit. All brass fittings and bulletproof plunger. Get rid of that worthless factory choke and apply a direct shot of fuel!

Part Number: 01-02-403

Billet carb adaptors in stock and available to fit all Mikuni 46mm SBN Single and Dual carb setups. Required for adapting to aftermarket air filters / flame arrestors. Flange Outer Diameter: 2.75 (inches).

Part Number: 01-02-076

Billet Carb Adapter for Keihin CDK and CDK II Carburetors found on 1995 Kawasaki 750 SXI dual carb models. Required for adapting to aftermarket air filters / flame arrestors. Flange Outer Diameter: 2.75 (inches).

Part Number: 01-02-072

Finish the look of your engine compartment with Blowsion specialty colored 1/8" fuel primer hose. Available in Clear, Blue, Green, Orange, Red, Yellow, or Black. Quantity is sold by the foot.

Blowsion Carbon composite tank holder keeps the tank from sliding around in the bottom of a hull during freestyle maneuvers. Available for Small Fuel Tank and OEM/ColdFusion Yamaha Fuel Tanks.