New Products

The all new Universal OVP "Over the Pivot" Sealed Bearing Steering System. Fits all OEM Yamaha and Aftermarket Handlepoles (RRP/UMI/AC). Available in Black, Clear, Blue, Orange, Red and Green bright dip anodized colors!  PLEASE NOTE: The Universal OVP Steering System will only work with Fat Straight, Fat Riser or 4-Degree Fat Bars (sold separately). If you are installing on the OEM Yamaha Pole you will need to make extensive modifications to your OEM Chin pad mounting and location in order to clear the handlebars. The chin pad must be re-located further forward on the OEM Pole. You may want to consider the Standard Blowsion Steering System as it will clear the OEM Yamaha Chin Pad without any modifications.

Blowsion Billet Cylinder Head Insert for the newly redesigned Blowsion 1-Piece Cylinder Head. Available in all anodized colors!

Blowsion Tornado Filter (1.5 inches tall). Even Shorter Version Now Available! For those who require a little shorter flame arrestor for hood clearance. 4 x 1.5" Inches Tall. Available in Anozided Black, Clear, Blue, Green, Orange, Red and Purple. Sold Each.

New Blowsion OVP "Over the Pivot" steering system. Available in Black, Clear, Blue, Orange, Red, Green and Purple bright dip anodized colors! Specifically designed to fit the new Blowsion Billet handlepole.

Flow Control Valve - 3/8" Adjustable Pro Model. This 3/8" valve has been designed to prevent water flow to the waterbox at idle and off idle engine speeds. This allows the craft to be more responsive off the line and around turns. Results are HUGE gains in throttle response. All stainless internal parts. IJSBA race legal. Now Available in all Colors!

Blowsion Billet Yamaha Electrical Box Mount. A must have for any Aftermarket Yamaha Superjet Based Ski Build. Stainless Steel Hardware Included!

Part Number: 04-04-048

Blowsion Billet 6061 aluminum replacement for the cast factory OEM bracket on all 1995 and older Yamaha Super Jets. Oversize length of breather tubing included. Includes oversize cable routing hole for installing the handlepole breather tubing. Blowsion design also includes handlepole spring mounting hole for riders that desire a light pole set up. Totally sanitary and necessary upgrade from the feeble cast aluminum OEM bracket.

Part Number: 03-03-002

New low cost one piece billet cylinder head. Anodized for corrosion protection with Blowsion Engraved logos. For 701 / 760 / 850 Yamaha Engines. NOTE: Cylinder Head Domes, Optional Hardware Kit, Optional Girdle Kit and Optional Color Anodized Head Insert are all sold separately.

Introducing the new Blowsion Yamaha Fuel Pickup. Designed with the option for use as a single, dual and triple pickup this billet beauty is the lowest profile and lightest weight internal fuel filler available.

Blowsion Stainless Steel FP Headpipe Bolt Kit. Replace those crusty old factory pipe bolts with these stainless steel socket heads. Kit Includes 3 Bolts, 3 washers and 3 Lock Washers. Fits all Yamaha Style FP Headpipes.

Part Number: 01-01-698

Blowsion Stainless Steel Pump Bolt Kit for all Yamaha Superjet and Rickter Models. The Socket Head Bolt design allows for use of hex key tool which results in much easier access. A Great replacement for OEM Yamaha Part Number: 90119-10948-00. Kit Includes 4 Bolts and 4 Washers.

Part Number: 02-02-478

Blowsion Adjustable SHCS Factory Pipe Headpipe Water Screw Kit - Standard Size. Socket Head Cap Screw Design provides adjustments for tuning. This kit is a direct replacement for those seized up water adjusting screws. Compatible with all Factory Headpipes. Kit Includes 3 screws, 3 nuts and hex key.

Part Number: 01-01-743

RRP CBX (Carbon Billet X-Lite) Handlepole. The new CBX is an ultralight carbon fiber and billet aluminum x-lite adjustable handlepole is recommended for freestyle and racing. Available with Anodized Aluminum or Carbon Fiber Tubes.

The Blowsion 148mm Aluminum Pump Shoe was designed for fitting larger 148mm pumps into both Yamaha Superjet and aftermarket hulls. Using our 148mm shoe vs a 144mm (stock Superjet size) will greatly increase hook up and drive when used in conjunction with 148mm pumps. Fits all years Yamaha Superjet, 1993-1996 WaveBlaster 1, Polaris Octane and Rickters. Mounting holes are not drilled or tapped so installation in the different Yamaha design aftermarket hulls can be facilitated.

Part Number: 02-02-434

Two California Originals have teamed up to bring you an updated version of one of your favorite grips. The new ODI Vans v2.1 Lock-On Grips feature a new single-clamp design for simplified installation and an updated waffle pattern for better comfort and control. The grips are constructed from ODI’s proprietary materials and are available in six awesome colors with custom checkered clamps in coordinating colors. This modern take on the Vans grip adds updated features to the classic design while still providing the rider with the distinctive feel that they have come to love. Color: Black

Part Number: 03-05-436