New Products

Blowsion Stainless Steel Socket Head Bolt Kit for Mikuni Super BN Carburetors. The Socket Head Bolt design allows for use of hex key tool which results in much easier access. Replace those easy to strip Mikuni phillips head screws before it is too late!

Part Number: 01-02-547

The Blowsion Fuel Tank is specially designed to work in conjunction with the aftermarket lay down style exhaust systems that don't work with the OEM Yamaha Fuel Tank (RRP, TNT, PowerFactor). One of the main problems with using these exhaust systems is the battery has to be relocated which can cause quite the problem. The Blowsion Fuel Tank is unique as it has a cut out in the front of the tank that enables you to relocate your battery with ease. Fuel Capacity: 4 Gallons.

The Blowsion 148mm Aluminum Pump Shoe was designed for fitting larger 148mm pumps into both Yamaha Superjet and aftermarket hulls. Using our 148mm shoe vs a 144mm (stock Superjet size) will greatly increase hook up and drive when used in conjunction with 148mm pumps. Fits all years Yamaha Superjet, 1993-1996 WaveBlaster 1, Polaris Octane and Rickters. Mounting holes are not drilled or tapped so installation in the different Yamaha design aftermarket hulls can be facilitated.

Part Number: 02-02-434

Blowsion Stainless Steel Pump Bolt Kit for all Yamaha Superjet and Rickter Models. The Socket Head Bolt design allows for use of hex key tool which results in much easier access. A Great replacement for OEM Yamaha Part Number: 90119-10948-00. Kit Includes 4 Bolts and 4 Washers.

Part Number: 02-02-478

Blowsion Stainless Steel FP Headpipe Bolt Kit. Replace those crusty old factory pipe bolts with these stainless steel socket heads. Kit Includes 3 Bolts, 3 washers and 3 Lock Washers. Fits all Yamaha Style FP Headpipes.

Part Number: 01-01-698

Blowsion Stealth Series PWC Jet Ski Covers. No more cover flapping on the freeway. Weather resistant material with special UV coating. Engineered for a custom fit for each PWC model. Color: Stealth Black.

Blowsion Stainless Steel Pump Bolt Kit for Yamaha 155mm Pump Conversions with threaded wear ring. The Socket Head Bolt design allows for use of hex key tool which results in much easier access. Kit Includes 4 Bolts.

Part Number: 02-02-479

Introducing the new Blowsion Yamaha Fuel Pickup. Designed with the option for use as a single, dual and triple pickup this billet beauty is the lowest profile and lightest weight internal fuel filler available.

New low cost one piece billet cylinder head. Anodized for corrosion protection with Blowsion Engraved logos. For 701 / 760 / 850 Yamaha Engines. NOTE: Cylinder Head Domes, Optional Hardware Kit, Optional Girdle Kit and Optional Color Anodized Head Insert are all sold separately.

Blowsion Billet Yamaha Electrical Box Mount. A must have for any Aftermarket Yamaha Superjet Based Ski Build. Stainless Steel Hardware Included!

Part Number: 04-04-048

Flow Control Valve - 3/8" Adjustable Pro Model. This 3/8" valve has been designed to prevent water flow to the waterbox at idle and off idle engine speeds. This allows the craft to be more responsive off the line and around turns. Results are HUGE gains in throttle response. All stainless internal parts. IJSBA race legal. Now Available in all Colors!

New Blowsion OVP "Over the Pivot" steering system. Available in Black, Clear, Blue, Orange, Red, Green and Purple bright dip anodized colors! Specifically designed to fit the new Blowsion Billet handlepole.

Blowsion Tornado Filter (1.5 inches tall). Even Shorter Version Now Available! For those who require a little shorter flame arrestor for hood clearance. 4 x 1.5" Inches Tall. Available in Anozided Black, Clear, Blue, Green, Orange, Red and Purple. Sold Each.

Blowsion Billet Cylinder Head Insert for the newly redesigned Blowsion 1-Piece Cylinder Head. Available in all anodized colors!

The all new Universal OVP "Over the Pivot" Sealed Bearing Steering System. Fits all OEM Yamaha and Aftermarket Handlepoles (RRP/UMI/AC). Available in Black, Clear, Blue, Orange, Red and Green bright dip anodized colors!  PLEASE NOTE: The Universal OVP Steering System will only work with Fat Straight, Fat Riser or 4-Degree Fat Bars (sold separately). If you are installing on the OEM Yamaha Pole you will need to make extensive modifications to your OEM Chin pad mounting and location in order to clear the handlebars. The chin pad must be re-located further forward on the OEM Pole. You may want to consider the Standard Blowsion Steering System as it will clear the OEM Yamaha Chin Pad without any modifications.