Search results for 'OEM'

Genuine OEM Yamaha Starter Bendix Spring.

OEM Part Number: 90501-14M73-00

Replacement Pro-X Piston Circlip for Yamaha 20mm Wrist Pin. Compatible with Pro-X or OEM pistons. Pro-X Piston clips are not just a circled wire. They avoid the pin to move in the piston bosses. Do not underestimate the forces on the pin during operation. Exceeds OEM specifications. Sold as a pair (Set of 2).

Part Number: 01-03-604

WSM Aftermarket Voltage Regulator for All Yamaha Superjet, FX1, and WaveBlaster 1 Models. Manufactured to OEM specifications

Part Number: 004-225

WSM Aftermarket Throttle Cable for 1990-2020 Yamaha Superjet, 1994-1995 FX1, and 1993-1995 WaveBlaster 1 Models. Manufactured to OEM specifications

Part Number: 002-055

The Blowsion Fuel Tank is specially designed to work in conjunction with the aftermarket lay down style exhaust systems that don't work with the OEM Yamaha Fuel Tank (RRP, TNT, PowerFactor). One of the main problems with using these exhaust systems is the battery has to be relocated which can cause quite the problem. The Blowsion Fuel Tank is unique as it has a cut out in the front of the tank that enables you to relocate your battery with ease. Fuel Capacity: 4 Gallons.

This kit includes all items required and detailed instructions to install your Yamaha Chin Pad on the OEM Yamaha Fiberglass Handlepole when using our Universal OVP Steering System.

Part Number: 03-04-200

NEW! - The Blowsion Billet Strap Hook. Replaces OEM Yamaha style waterbox, battery, and fuel tank strap hooks. Fits ALL years Yamaha Superjet, Rickter Hulls, Lightweight.DE, and many other aftermarket superjet based hull types. The Blowsion Strap Hook incorporates a removable 3mm set screw that retains the strap in place so that it cannot come off. This innovative little feature works perfectly for the hard to reach strap hooks where the straps have a tendency to come off. Price includes one hook, one M6 x 16mm bolt and a M3 x 6mm bolt. Available in Purple, Red, Black, Green, Orange, Blue and Teal Anodized Colors.

Blowsion Stainless Steel Head Hardware Kit for Yamaha Cylinder Heads. Compatible with all Blowsion and OEM Yamaha Superjet Cylinder Heads. Kit includes 10 Bolts and 10 Washers.

Part Number: 01-03-108

Genuine OEM Yamaha Starter Motor. Fits all Yamaha SuperJet, FX1 and WaveBlaster.

OEM Part Number: 6M6-81800-10-00

Blowsion Billet Flywheel Cover. Fits all OEM Yamaha Superjet 61X and 62T Crankcases. Stainless Steel Hardware and O-Ring Gasket Seal Included. Available in all colors!

Blowsion Stainless Steel Steering Cable Extension. Compatible with all OEM Yamaha and OEM Kawasaki 5mm Steering Cable Ends.

Part Number: 03-04-210

The all new Universal OVP "Over the Pivot" Sealed Bearing Steering System. Fits all OEM Yamaha and Aftermarket Handlepoles (RRP/UMI/AC). Available in Black, Clear, Blue, Orange, Red and Green bright dip anodized colors!  PLEASE NOTE: The Universal OVP Steering System will only work with Fat Straight, Fat Riser or 4-Degree Fat Bars (sold separately). If you are installing on the OEM Yamaha Pole you will need to make extensive modifications to your OEM Chin pad mounting and location in order to clear the handlebars. The chin pad must be re-located further forward on the OEM Pole. You may want to consider the Standard Blowsion Steering System as it will clear the OEM Yamaha Chin Pad without any modifications.

Yamaha Lower Intake Manifold Gasket for OEM Yamaha 701 (61x) Manifolds. Replaces OEM Yamaha Gasket Part Number: 61X-13566-A1-00

Part Number: 01-02-444

Yamaha Upper Intake Manifold Gasket for OEM Yamaha 701 (61x) Manifolds. Replaces OEM Yamaha Gasket Part Number: 61X-13563-A1-00

Part Number: 01-02-443

Rick Roy Products billet aluminum Steering Stop / Chin pad Support. This product is required for all RRP Handlepoles when fitting an RRP Chin Pad (Kawasaki, Yamaha, Rickter, Kommander, etc.). Designed to provide additional support to chin pads and prevent them from crushing or flexing. May fit other brands of handlepoles as well. Anodized, includes stainless hardware.