Search results for 'Blowsion'
-
Blowsion Strap Hook Base
Blowsion Billet Strap Hook Base. With the ever evolving aftermarket hulls and different engine configurations available in today's market the Blowsion Mechanic team consistently ran into problems with having to relocate individual components E.G Exhaust, Battery and Mounting Straps etc... So they went to work and designed a Billet Aluminum Strap Hook Base. Available in all colors! Strap Hook Sold Separately.
Learn More -
3/8" Quick Disconnect / Water Restrictor
The 3/8" Quick Disconnect / Water Restrictor can be used as Quick Disconnect or use one of 3 supplied brass inserts to restrict the flow of water or increase pressure where it is needed. Includes 3 brass restrictors and stainless steel hose clamps. Now Available in all colors!
Learn More -
Blowsion Pump Shoe - Yamaha 148MM
The Blowsion 148mm Aluminum Pump Shoe was designed for fitting larger 148mm pumps into both Yamaha Superjet and aftermarket hulls. Using our 148mm shoe vs a 144mm (stock Superjet size) will greatly increase hook up and drive when used in conjunction with 148mm pumps. Fits all years Yamaha Superjet, 1993-1996 WaveBlaster 1, Polaris Octane and Rickters. Mounting holes are not drilled or tapped so installation in the different Yamaha design aftermarket hulls can be facilitated.
Part Number: 02-02-434
Learn More -
FP Headpipe Water Screw Kit - Twisters
Blowsion Adjustable T-Handle Factory Pipe Headpipe Water Screw Kit - Standard Size. T-Handle Design provides quick and easy adjustments for tuning. This kit is a direct replacement for those seized up water adjusting screws. Compatible with all Factory Headpipes.
Part Number: 01-01-741
Learn More -
Stainless Steel Hose Clamp 2.5"
Heavy Duty Stainless Steel Hose Clamp. Compatible with all 2.0" to 2.75" Inch (OD) Exhaust Couplers. Sold Each.
Part Number: 01-01-176
Learn More -
TNT Exhaust Mounting Block
Blowsion TNT Exhaust Mounting Block. The foam blocks are designed to hold the pipe in position so that the coupler and stinger height match up perfectly to the manifold and waterbox. Perfect alignment will help optimize performance and increase longevity of the rubber couplers. Kit includes 3 individual foam blocks with 3M adhesive backing. Compatible with all TNT, RRP Carbon and PowerFactor Style Exhaust Systems.
Part Number: 01-01-168
Learn More -
T Fitting 3/8" x 1/4" x 3/8" Barbed - Black
3/8" x 1/4" x 3/8" Barbed Reducer T Hose Fitting. Useful for different types of water routing applications. Primarily used with Water Injection. Color: Black
Part Number: 01-01-070
Learn More -
Throttle Cable Drum
Billet aluminum throttle drum for maximum throttle adjustments. Machined from 6061-T6 aluminum and anodized for corrosion protection. Features 9 different hole locations for the throttle cable to attach. Now available in 5 different colors!
Learn More -
Recessed Dash Mount
New! Blowsion Recessed Dash Mount. Fed up of breaking expensive Bilge Switches and Primer Bulbs? The Blowsion Team has a solution. The Recessed Dash Mount is perfect for mounting your switches and primers. The Mount enables the switch/primer to sit flush eliminating the risk of being knocked off. On top of that each mount comes with a Brushed Aluminum Anodized Bezel available in 5 color options. Stainless Steel Mounting Hardware and Installation Instructions Included.
Learn More -
Blowsion Water Injection Fitting
Blowsion Exhaust Water Injector Brass Fitting. Tapped and threaded for a Mikuni Main Jet. 1/4" Hose Barb x 1/8" NPT. Bidirectionally slotted for better cooling. Used on aftermarket high performance exhaust systems (TNT/Powerfactor/RRP).
Part Number: 01-01-075
Learn More -
TNT Waterbox Coupler 2.25"
2.25 Inch Heavy Duty 6 Ply Waterbox Coupler for TNT V2/V3 Exhaust Systems. Connects Exhaust Chamber to the Waterbox. 2.25 (ID) x 5.125 (LENGTH).
Part Number: 01-01-166
Learn More -
PowerFactor/TNT Exhaust Coupler 3.5"
3.5 Inch Heavy Duty 6 Ply Exhaust Coupler for TNT V2/V3 and PowerFactor Exhaust Systems. Connects Exhaust Manifold to Chamber.
Part Number: 01-01-167
Learn More -
Blowsion Fuel Tank Fitting
Blowsion Fuel Tank Fitting with Rubber Grommet. 1/4 Hose Barb. Compression Fit. Install with 17/32 Drill Bit.
Part Number: 01-02-598
Learn More -
Handlepole Breather Tubing
Handle Pole Breather Tubing. Fits Blowsion, RRP, and other pole brackets. Available in 2.0" Inch or 2.25" Inch ID. Length: 24" (61cm) Sold Individually.
Learn More -
Blowsion Pole Bracket Plate
Blowsion Pole Bracket Plate. Required when installing a Blowsion Billet Handlepole on an older (PRE-2014 DESIGN) Blowsion Dual Hole Handle Pole Bracket. Fits 1996-2020 Yamaha Superjet, 1994-1995 Yamaha FX1, 2002-2004 Polaris Octane, and Kawasaki 750 Models.
Part Number: 03-04-067
Learn More