Search results for 'Hydro-Turf'
-
RRP Rickter Front Foothold
The RRP Rickter Front Foothold is wrapped with two layers of 9mm premium plush underpad with Rickter’s durable yet soft molded diamond Hydro-Turf EVA. Also includes install hardware of 4 x M8 Countersunk bolts, Washers, Locknuts, and RRP AB Washers for a clean and strong installation. The EVA is wider on the sides of the binding to accommodate a range of tray sizes. Light trimming of the EVA Is recommended for the ideal fit followed by drilling four holes in the dash to install the binding at the desired height.
Part Number: 05-03-019
Learn More -
Mounting Block (4 inch)
Hydro-Turf Mounting Blocks can be used for a variety of applications including: handle pole pads / lifters, footholds and mounting exhausts. Blocks are 4" thick (4.7" x 5.1"). Add 3M self-adhesive for $5.
Learn More -
Corner Kicks (2 inch)
Use Hydro-Turf 2 inch Rear Corner Kicks for added Feel and Control. Installs under foam or stitched mats (some models of watercraft may require an extended bottom mat).
Part Number: 04-02-348
Learn More -
Mounting Block (2 inch)
Hydro-Turf Mounting Blocks can be used for a variety of applications including: handle pole pads / lifters, footholds and mounting exhausts. Blocks are 2" thick (4.7" x 5.1"). Add 3M self-adhesive for $5.
Learn More -
Side Rail Turf Kit - Yamaha SJ / FX1 / KAW 650/750 / Rickter
Blowsion Custom Cut Side Rail Turf Kit. Fits all years Yamaha Superjet, FX1, Polaris Octane, Rickter and Kawasaki 650 and 750 Stand up Models. Improve the traction and looks on the side rails of your ski with our custom fit side rail covering kits. Side Rail Turf Kits Include enough material to cover the front bumper, sides, and rear corners of the side rail. Side rail kits bond directly to the fiberglass. All OEM/Stock plastic will need to be removed prior to application of side rail turf kit. For most applications a Quart of Mat Glue is recommended for installation. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-324
Learn More -
Mat Kit - Klowners - Yamaha Superjet (1996-2020)
Blowsion Custom Cut Mat Kit. Glue it On! Fits all 1996-2020 Yamaha Superjet Models with Klowner Footwells. Includes bottom, tray sides, dash, footwell mat pieces, and undermat foam. Klowner Footwells not included. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-077
Learn More -
Mat Kit - Kickers - Yamaha Superjet (1996-2020)
Blowsion Custom Cut Mat Kit. Glue it On! Fits all 1996-2020 Yamaha Superjet Models. Includes bottom, tray sides, dash, footwell mat pieces, and undermat foam. Kicker Footwells not included. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-076
Learn More -
Mat Kit - Diggers - Yamaha Superjet (1996-2020)
Blowsion Custom Cut Mat Kit. Glue it On! Fits all 1996-2020 Yamaha SuperJet Models. Includes bottom, tray sides, dash, footwell mat pieces, and undermat foam. Digger Footwells not included. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-075
Learn More -
Mat Kit - Stock Tray - Yamaha Superjet (1996-2020)
Blowsion Custom Cut Mat Kit. Glue it on! Fits all 1996-2020 Yamaha Superjet Models. Includes bottom, tray sides, dash and undermat foam. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-073
Learn More -
Handlepole Shock Pad - Yamaha (2 inch)
Hydro-Turf Handle Pole Shock Pad for Yamaha and Aftermarket Hoods. Cushion your Yamaha SuperJet hood from hard handlepole impacts. Includes 3M self-adhesive for quick and easy installation. 2 Inch thick medium density foam.
Part Number: 04-02-353
Learn More -
Hydro-Turf Kick Wedge 2"
Add a kick tail to your watercraft bottom mat area with this 2" kick wedge. Helps to keep the riders back foot from slipping out of the tray and getting weight farther forward.
Part Number: 04-02-344
Learn More -
Hydro-Turf Sheet - Dual Layer - Waffle
Dual Layer 2-Tone Sheets of 1/4" (6mm) Hydro-Turf with Cut Waffle Grooves. Available in any two of the color combinations Hydro Turf offers on the below drop down menus.
See our special formulated solvent-based Mat Glue for Installation.
Learn More -
Hydro-Turf Sheet - Dual Layer - Diamond
Dual Color Sheets of 1/4" (5.5mm) Hydro-Turf with Cut Diamond Grooves. Available in any two of the color combinations Hydro Turf offers on the below drop down menus.
See our special formulated solvent-based Mat Glue for Installation.
Learn More -
Undermatting Foam - 18mm Plush
48" x 17.5" section of 18mm thick plush (softer) foam undermat. This our softest underpad. PLUSH offers greater comfort and compression recovery for extreme riders.
Part Number: 04-02-331
Learn More -
Hydro-Turf Lifter Wedges
Inexpensive traction option. Gain control of your ski or runabout by applying these lifter wedges to your tray sides or inner and outer gunnels. Available in two length options. Sold as Pair (2). Color: Black
Learn More -
Handlepole Shock Pad - Yamaha (1 inch)
Hydro-Turf Handle Pole Shock Pad for Yamaha and Aftermarket Hoods. Cushion your Yamaha SuperJet hood from hard handlepole impacts. Includes 3M self-adhesive for quick and easy installation. 1 Inch thick medium density foam.
Part Number: 04-02-351
Learn More