Search results for 'Hydro-Turf'

Blowsion Custom Cut Mat Kit. Glue it on! Fits all 2021 and Newer Yamaha Superjet 1050cc 4-Stroke Models. Includes bottom, tray sides, dash and undermat foam. Options available with or without 2" inch rear tray corner kick wedges. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

The RRP Rickter Front Foothold is wrapped with two layers of 9mm premium plush underpad with Rickter’s durable yet soft molded diamond Hydro-Turf EVA. Also includes install hardware of 4 x M8 Countersunk bolts, Washers, Locknuts, and RRP AB Washers for a clean and strong installation. The EVA is wider on the sides of the binding to accommodate a range of tray sizes. Light trimming of the EVA Is recommended for the ideal fit followed by drilling four holes in the dash to install the binding at the desired height.

Part Number: 05-03-019

Hydro-Turf Mounting Blocks can be used for a variety of applications including: handle pole pads / lifters, footholds and mounting exhausts. Blocks are 4" thick (4.7" x 5.1"). Add 3M self-adhesive for $5.

Use Hydro-Turf 2 inch Rear Corner Kicks for added Feel and Control. Installs under foam or stitched mats (some models of watercraft may require an extended bottom mat).

Part Number: 04-02-348

Hydro-Turf Mounting Blocks can be used for a variety of applications including: handle pole pads / lifters, footholds and mounting exhausts. Blocks are 2" thick (4.7" x 5.1"). Add 3M self-adhesive for $5.

Blowsion Custom Cut Mat Kit. Glue it on! Fits all 1994-1995 Yamaha FX-1 Models with stock tray. Includes bottom, tray sides, dash and undermat foam. Check out the new Dual Color Turf option now available! See special formulated solvent-based mat glue for installation. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

Part Number: 04-02-051

Blowsion Custom Cut Mat Kit. Glue it on! Fits Rickter EVO FS1 / FS2 and Older Models. Includes bottom, tray sides, dash and undermat foam. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

Part Number: 04-02-050

Blowsion Custom Cut Mat Kit. Glue it on! Fits Rickter XFS Models. Includes bottom, tray sides, dash and undermat foam. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

Part Number: 04-02-060

Blowsion Custom Cut Mat Kit. Glue it on! Fits all 2017 and Newer Kawasaki SXR 1500cc 4-Stroke Models. Includes bottom, tray sides, dash and undermat foam. Options available with or without 2" inch rear tray corner kick wedges. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

Blowsion Custom Cut Mat Kit. Glue it On! Fits all years Kawasaki 650SX Standups. Includes bottom, tray sides, dash, footwell mat pieces, and undermat foam. Kicker Footwells not included. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

Part Number: 04-02-135

Blowsion Custom Cut Mat Kit. Glue it on! Fits all years Kawasaki 650SX Standup with stock sides. Includes bottom, tray sides, dash and undermat foam. Check out the new Dual Color Turf option now available! See special formulated solvent-based mat glue for installation. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

Part Number: 04-02-133

Blowsion Custom Cut Mat Kit. Glue it On! Fits all Polaris Octane Models with Kicker Footwells. Includes bottom, tray sides, dash, footwell mat pieces, and undermat foam. Kicker Footwells not included. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

Part Number: 04-02-088

Blowsion Custom Cut Side Rail Turf Kit. Fits all years Kawasaki SXR 800. Improve the traction and looks on the side rails of your ski with our custom fit side rail covering kits. Side Rail Turf Kits Include enough material to cover the front bumper, sides, and rear corners of the side rail. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

Part Number: 04-02-323

Blowsion Custom Cut Side Rail Turf Kit. Fits all years Yamaha Superjet, FX1, Polaris Octane, Rickter and Kawasaki 650 and 750 Stand up Models. Improve the traction and looks on the side rails of your ski with our custom fit side rail covering kits. Side Rail Turf Kits Include enough material to cover the front bumper, sides, and rear corners of the side rail. Side rail kits bond directly to the fiberglass. All OEM/Stock plastic will need to be removed prior to application of side rail turf kit. For most applications a Quart of Mat Glue is recommended for installation. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

Part Number: 04-02-324

Blowsion Custom Cut WaveBlaster Mat Kit. Glue it On! Fits all 1993-1996 Yamaha WaveBlaster Models. Kit Includes side and rear pieces. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

Part Number: 04-02-158