Search results for 'ADA'

ADA Racing Billet aluminum drive coupler with 18mm threads. Uses stock Kawasaki 650/750 rubber damper. Clear anodized for protection against salt water corrosion. Made in the USA! Also used on the Kawasaki 550SX driveshaft.

Part Number: 31-700199

RIVA Racing's all-new 'cone-style' flame arrestor takes a proven favorite to the next level. Reduced height accommodates low-profile hood designs of freeride standups. Stainless steel cap with integrated velocity cone increases air flow rate and efficiency providing improved throttle response. Proprietary stainless steel mesh filter element resists corrosion and is certified to meet U.S. Coast Guard 'SAE-J1928' standars for safety and reliability. Fits standard carburetor adapters and allows easy access to carburetor adjustment screws. Sold Individually.

Part Number: RY1301-1

Replacement RRP Trim Lever Adapter/Cable Adjuster.

Part Number: 03-05-273

ADA Racing Cylinder Head Girdle kit for the original ADA Kawasaki 750/800 Girdled Head. Includes all hardware and brackets. No cylinder mods required for this girdle kit, just bolt it on!

Part Number: KA800G

Billet dome for ADA Racing Kawasaki 800 V2 girdled head and big bore heads. Squish relief is .005" @ 83mm with a 4 degree angle. These domes will not fit our standard head shells, as the diameter is larger than our standard domes. They are notched to fit around the head studs and use a larger diameter compression o-ring (OR153). Domes are sold individually.

ADA Racing Billet Cylinder Head Dome for Kawasaki 750. Includes compression (OR042) and dome top (OR020) o-rings. Squish relief is 0 @ 81mm with a 4 degree angle. These domes fit ADA Racing standard 750/800 Cylinder Head and ADA Racing original girdled head with the billet brackets. Domes are sold individually.

Billet Girdled Cylinder Head for the Kawasaki 750 and 800. CNC machined at ADA Racing from 6061-T6 aluminum. Anodized for protection against corrosion. This is the head shell only and includes o-rings that fit into the grooves in the head shell and brass fittings.

Billet Cylinder Head for the Kawasaki 750 and SXR 800. All ADA Racing billet heads are made from 6061-T6 aluminum and CNC machined for consistency and performance. Anodized for durability and protection against salt-water corrosion. This is the head shell only. Includes orings that fit into the grooves in the head shell and brass fittings.

ADA Racing 3 degree angled reed spacer kit for the Kawasaki 900 and 1100 engines. Includes billet aluminum spacers, gaskets, and studs. All 3 spacers now include a pulse fitting. The studs that are included are for the stock intake manifold. If you are using an aftermarket intake, you may need to use longer studs if the manifold is thicker that stock.

Part Number: 31-131390

Kawasaki 650/750 billet driveline couplers. Machined from 6061- T6 aluminum for superior strength and durability. Utilizes a OEM Kawasaki style damper which is not only smaller in diameter but also stronger and helps reduce heat buildup in the driveline. Machined in hex on backside. These are sold as a set. Includes 1 coupler w/18mm threads and 1 w/20mm threads. Clear anodized for protection against salt water corrosion.

Part Number: 02-02-203

ADA Racing billet dome includes compression(OR042) and dome top(OR020) orings. Squish relief is .005 inch @ 82.5mm(fits up to 83mm piston) with a 4 degree angle. These domes fit ADA Racing standard 750/800 head and ADA Racing original girdled head with the billet brackets.

Boyesen Extreme Velocity Intake Manifold Kit for Kawasaki 750 and SXR 800 Engines. High quality Cast Aluminum Dual Intake Manifold allows optimized installation of aftermarket performance carbs. Kit includes (1) precision cast aluminum intake manifold, (2) "EV" RAD Valves, (1) carb adapter plate and all necessary installation hardware.

Part Number: IM-002AKIT

The adapter allows you to run a Mikuni SBN 44mm or 46mm Carburetor on your stock Kawasaki 650-750 Keihin Intake Manifold.

Part Number: ADPT-K

Jet Renu “Green” All Purpose Cleaner was formulated to cut through those tough grime stains on many different types of surfaces and materials. “Green” works safely on vinyl seats, upholstery, carpet, tires and any scuff marks. “Green” also removes exhaust residue on your painted surface. Our all-purpose cleaner is like no other product. “Green” powers through built up dirt and grime with a pleasant lemon scent. Just spray on, wipe off, environmentally safe, non-toxic and biodegradable. Size: 1 Gallon.

Part Number: JR-1023

Jet Renu “Purple” Wash and Wax is the ultimate high foaming premium soap which is fortified with 100% Brazilian Carnauba Wax. “Purple” cleans deep down into the gel coat and painted surface, lifts away caked on dirt and grime while leaving behind a high gloss shine and a protective barrier from the sun’s harmful UV rays. Our super concentrated formula is pH balanced, biodegradable and non-toxic. Size: 1 Gallon.

Part Number: JR-1002