Search results for 'Jet'

The 3/8" Quick Disconnect / Water Restrictor can be used as Quick Disconnect or use one of 3 supplied brass inserts to restrict the flow of water or increase pressure where it is needed. Includes 3 brass restrictors and stainless steel hose clamps. Now Available in all colors!

“Dri Wash” is one of Jet Renu's must have products. Dri Wash quickly and effectively removes dirt and grime from any surface by lifting away the contaminates with its powerful foaming action. Dri Wash not only works great to clean most surfaces without the use of water but it also leaves behind a protective coating and brilliant shine. Environmentally friendly and simple to use, just Spray on Wipe off, cleans, polishes & protects against UV Rays as well as it smells great. When used with a clean microfiber towel Dri Wash will not scratch the surface. Size: 12oz. can

Part Number: JR-1111

Jet Renu “Green” All Purpose Cleaner was formulated to cut through those tough grime stains on many different types of surfaces and materials. “Green” works safely on vinyl seats, upholstery, carpet, tires and any scuff marks. “Green” also removes exhaust residue on your painted surface. Our all-purpose cleaner is like no other product. “Green” powers through built up dirt and grime with a pleasant lemon scent. Just spray on, wipe off, environmentally safe, non-toxic and biodegradable. Size: 1 Gallon.

Part Number: JR-1023

Jet Renu “Purple” Wash and Wax is the ultimate high foaming premium soap which is fortified with 100% Brazilian Carnauba Wax. “Purple” cleans deep down into the gel coat and painted surface, lifts away caked on dirt and grime while leaving behind a high gloss shine and a protective barrier from the sun’s harmful UV rays. Our super concentrated formula is pH balanced, biodegradable and non-toxic. Size: 1 Gallon.

Part Number: JR-1002

Our “Shield Renu” is a protective coating made up of a special blend of silicones with fast-drying surfactants which makes the treatment of surfaces fast & easy. This product has a superfine mist that coats all surfaces evenly without sticky build-up or residue. Renu Shield Protects & conditions, vinyl, plastics, leather, rubber, metal, engine components and even wood surfaces. Spray on, wipe off, perfect for hard to reach areas while making plastic look new again with a high gloss shine. Size: 12oz. can.

Part Number: JR-045

RRP X-LITE Steering System that works with 28.6mm 1-1/8" Inch Fat bars only. Allows rider choice of 4 different handlebar options. Installation hardware and instructions included. Now available in Black, Blue, Red and Clear.

The Blowsion 148mm Aluminum Pump Shoe was designed for fitting larger 148mm pumps into both Yamaha Superjet and aftermarket hulls. Using our 148mm shoe vs a 144mm (stock Superjet size) will greatly increase hook up and drive when used in conjunction with 148mm pumps. Fits all years Yamaha Superjet, 1993-1996 WaveBlaster 1, Polaris Octane and Rickters. Mounting holes are not drilled or tapped so installation in the different Yamaha design aftermarket hulls can be facilitated.

Part Number: 02-02-434

Factory Zero Jet Launcher Beach Tote. The best selling Jet Launcher for Stand-Up Ski in Japan. Quick and Easy assembly and disassembly that does not require any tools. No bolts and nuts. Just pull and push Hitch Pins and assembly and disassembly is complete in just minutes. A special angle handle design makes it easy to launch and load a stand up watercraft.

Part Number: 06-05-090

Mikuni High Performance Super BN 44mm Carburetor. Comes Complete with Extended Throttle Shaft and Choke Shaft Removed. Sold Each. BN44-40-8052

Part Number: 01-02-104

Rule 25SA Fully Submersible Bilge Pump, 500 Gallon Per Hour, 12 Volt DC, Automatic Electronic Sensing. Bilge Pump turns on and checks for water approximately every 2-1/2 minutes. If resistance (water) is found, it will run for as long as water is present. When all the water is pumped out, the pump shuts off and returns to its 2-1/2 minute test cycle.

Part Number: 06-01-002

RRP Trim Ring Only. Fits RRP 144MM and 155MM Freestyle Tilt Kits. Available in Black, Silver, Red and Blue/p> Learn More

RRP Rickter Trim Lever. Available in Black, Blue, Red or Silver.

RRP Rickter Throttle Lever. Available in Black, Red, Blue or Silver.

Blowsion Adjustable T-Handle Factory Pipe Headpipe Water Screw Kit - Standard Size. T-Handle Design provides quick and easy adjustments for tuning. This kit is a direct replacement for those seized up water adjusting screws. Compatible with all Factory Headpipes.

Part Number: 01-01-741

Heavy Duty Stainless Steel Hose Clamp. Compatible with all 2.0" to 2.75" Inch (OD) Exhaust Couplers. Sold Each.

Part Number: 01-01-176