Search results for 'Sxr 800'

Blowsion Billet Strap Hook Base. With the ever evolving aftermarket hulls and different engine configurations available in today's market the Blowsion Mechanic team consistently ran into problems with having to relocate individual components E.G Exhaust, Battery and Mounting Straps etc... So they went to work and designed a Billet Aluminum Strap Hook Base. Available in all colors! Strap Hook Sold Separately.

“Dri Wash” is one of Jet Renu's must have products. Dri Wash quickly and effectively removes dirt and grime from any surface by lifting away the contaminates with its powerful foaming action. Dri Wash not only works great to clean most surfaces without the use of water but it also leaves behind a protective coating and brilliant shine. Environmentally friendly and simple to use, just Spray on Wipe off, cleans, polishes & protects against UV Rays as well as it smells great. When used with a clean microfiber towel Dri Wash will not scratch the surface. Size: 12oz. can

Part Number: JR-1111

Jet Renu “Green” All Purpose Cleaner was formulated to cut through those tough grime stains on many different types of surfaces and materials. “Green” works safely on vinyl seats, upholstery, carpet, tires and any scuff marks. “Green” also removes exhaust residue on your painted surface. Our all-purpose cleaner is like no other product. “Green” powers through built up dirt and grime with a pleasant lemon scent. Just spray on, wipe off, environmentally safe, non-toxic and biodegradable. Size: 1 Gallon.

Part Number: JR-1023

Jet Renu “Purple” Wash and Wax is the ultimate high foaming premium soap which is fortified with 100% Brazilian Carnauba Wax. “Purple” cleans deep down into the gel coat and painted surface, lifts away caked on dirt and grime while leaving behind a high gloss shine and a protective barrier from the sun’s harmful UV rays. Our super concentrated formula is pH balanced, biodegradable and non-toxic. Size: 1 Gallon.

Part Number: JR-1002

Our “Shield Renu” is a protective coating made up of a special blend of silicones with fast-drying surfactants which makes the treatment of surfaces fast & easy. This product has a superfine mist that coats all surfaces evenly without sticky build-up or residue. Renu Shield Protects & conditions, vinyl, plastics, leather, rubber, metal, engine components and even wood surfaces. Spray on, wipe off, perfect for hard to reach areas while making plastic look new again with a high gloss shine. Size: 12oz. can.

Part Number: JR-045

Rule 25SA Fully Submersible Bilge Pump, 500 Gallon Per Hour, 12 Volt DC, Automatic Electronic Sensing. Bilge Pump turns on and checks for water approximately every 2-1/2 minutes. If resistance (water) is found, it will run for as long as water is present. When all the water is pumped out, the pump shuts off and returns to its 2-1/2 minute test cycle.

Part Number: 06-01-002

Dual Color Sheets of 1/4" (5.5mm) Hydro-Turf with Cut Diamond Grooves. Available in any two of the color combinations Hydro Turf offers on the below drop down menus.

See our special formulated solvent-based Mat Glue for Installation.

The ODI Cross Trainer 130mm Lock-On Grip Set features soft comfortable rib patterns interlaced with a thicker criss-cross pattern for a soft feel without a loss in control. Made in the USA!

Part Number: 03-05-370

Inexpensive traction option. Gain control of your ski or runabout by applying these lifter wedges to your tray sides or inner and outer gunnels. Available in two length options. Sold as Pair (2). Color: Black

So-Cal originals have teamed up to create a modern day classic waffle grip design. Check out the new Vans® Lock-On Grips by ODI. Grip set includes Lock-On grips, black checkered clamps, and screws.

Part Number: 03-05-364

ODI has enlisted the help of our good friends over at Troy Lee Designs to help put an artistic spin on a quality design. After hundreds of drawings and designs, what has been developed is one of the most innovative ODI grips yet...The ODI TLD Lock-On Grip.

Part Number: 03-05-330

ODI has enlisted the help of our good friends over at Troy Lee Designs to help put an artistic spin on a quality design. After hundreds of drawings and designs, what has been developed is one of the most innovative ODI grips yet...The ODI TLD Lock-On Grip.

Part Number: 03-05-329

Approved whistle for help or attention. Quick-disconnect clip for jacket, vest, glove or wrist lanyard. Required in most riding locations by law.

Part Number: 07-04-555

These Blowsion machined bypass fittings are angled at 45 degrees of flow. Fits 1/2" ID Cooling Hose (Used in Most 4-Stroke SXR1500 / Runabout Applications). Offered in Anodized Clear or Black.

Blowsion Rotary waterproof bilge switches are corrosion resistant and have withstood the most abuse we can give them. Pair with the Blowsion Dash Fitting for best protection.

Part Number: 06-01-201