Search results for 'ODI'
-
Vacate Valve - Yamaha
A simple installation drain valve alternative for the OEM drain plugs in Yamaha model Watercraft. Available in Black or Clear Anodized Colors. Sold Each.
Learn More -
Bilge Switch / Primer Mounting Plate
This cool universal anodized black aluminum mounting plate allows easy mounting of the rotary bilge switch as well as primer bulb on the dash. Specifically designed for the SXR but will work with other models. Inside mounting with the correct bulb style primer hole and rotary bilge switch ID means a sanitary install in minutes with no grinders or tubes of silicone needed.
Part Number: 04-06-002
Learn More -
Oil Injection Block Off Plate
Oil block-off plates allow for an easy conversion from factory oil injection to pre-mixing your own fuel. Block-off plates fit all Yamaha 650701/760 and Kawasaki 650/750 Models. Hardware included. Anodized Black.
Part Number: 01-03-812
Learn More -
ODI Blowsion Lock Ring End Caps
ODI Grip Blowsion Logo Lock Ring End Cap Combo- now you can have the anodized bling look all the way through to the end cap. Each kit includes inner lock rings, and outer lock ring/caps w/ hardware.
Learn More -
Blowsion Handlebar Clamps
Blowsion Billet aluminum handle bar clamps for 7/8" Inch bars. Sold as a pair (2) with stainless bar clamp screws included. These bar clamps provide the finishing touch to a clean steering system. Now available in all anodized colors!
Learn More -
Bow Eye Bushing - Extended
Introducing Long John Silver. Extended Length Bow Eye Bushing for those custom install rear mat kick wedges or thick tray undermat. One extra full inch of thread guarantees plenty of material to nut up to! Offered in Anodized Black and Clear.
Learn More -
Bow Eye Bushing
Blowsion machined aluminum bow eye bushings protect the hull when trailering. Offered in Anodized Clear, Black, Green, Red, Blue, Purple and Orange. All Colors In stock!
Learn More -
Blowsion Pole Bracket - Single Hole
Blowsion lowered billet aluminum handlepole pivot bracket for 1996-2020 Yamaha Superjet, 1994-1995 Yamaha FX1, 2002-2004 Polaris Octane and Kawasaki 750 Pole Conversions. Color: Anodized Black
Part Number: 03-03-003
Learn More -
Blowsion Billet Hood Latch
Replace your rear factory hood latch with a billet aluminum BLOWSION latch and ride worry free. Recently updated and re-machined to also fit the Kawasaki SXR 800 and SXR 1500. Also fits all years Yamaha FX1 and all years Yamaha Super Jet. A must for surf and big wave riders, especially those running a BLOWSION pole limiting rope. Requires the stock base locking hardware. Now available in more colors- Anodized Green, Red, Blue, Orange, Clear, Purple and Black!
Learn More -
Blowsion Hood Hooks - SXR
Utilizing our many years of Super Jet Freestyle and surf quality hood hook design experience, these bulletproof SXR billet hood hooks allow for the ultimate abuse of your 2003 and newer Kawasaki SXR 800 and SXR 1500 on the race course, river or in big surf. Do not risk losing your hood -- no more tweaked or broken OEM clips bending or breaking and causing serious engine and wallet damage. Includes Stainless Steel Mounting Hardware. Color: Anodized Black.
Part Number: 04-04-101
Learn More -
Blowsion Billet Hood Bumper - Kawasaki SXR/750
Blowsion Direct Billet Replacement for OEM Kawsaki SXR and 750SX, SXI, & SXi-Pro hood bumpers. Anodized Black.
Learn More -
Engine Block Off Plates Yamaha (62T)
Engine Block Off Plates 62T. A great way to block off access to your internal motor and all its complex innards. No more red rags or cheesy paper towels to suck through your initial engine fire off and carpet the cases with! Cool way for storing and displaying motors. Carbon Black Anodized and includes all mounting hardware. Fits all years 62T 701cc Yamaha two cylinder motors.
Part Number: 01-03-813
Learn More -
Blowsion Cylinder Spacer Plate
Blowsion Cylinder Spacer plates to be used in stroker applications or to modify cylinder deck height. Available for 701/760 and 850 cylinder sizes. Sold each.
Learn More -
CAS Billet Aluminum Flange Only
Available for riders wanting to use the end flange only for custom scupper and rear exhaust installations etc. The new billet flange assembly is the premium design setup and allows use of the Blowsion billet exhaust outlet so vain riders can sanitize both sides of the rear of their watercraft. Fits all years Super Jet, KAWI 750 and SXR 800, KAWI 650, and Polaris Octane. Anodized Clear.
Part Number: 06-01-023
Learn More -
Blowsion Shortened Turnplate
Experience the improved ride and benefits of having an adjustable and shortened handlepole length without replacing your handlepole. The Blowsion billet shortened length turn plate can be combined with an OEM or aftermarket handlepole to create the perfect rider setup. Color: Anodized Black.
Part Number: 03-05-043
Learn More -
Blowsion Steering System without Turnplate
Blowsion Billet aluminum steering system without turnplate. Stainless Steel Turnplate shaft rides in two O-ring sealed bearings. Included special machined Blowsion Krok Kollar stainless lock nut with set screw. Fits all stock or aftermarket Yamaha design handle poles. Steering Cap and bearing housing are carbon anodized black for corrosion protection. Works with Blowsion Kawasaki and Yamaha billet shortened turnplate. Includes 7/8" Handlebar Clamps.
Part Number: 03-05-001
Learn More