Search results for 'Sxr'
-
Blowsion Steering Stop
Blowsion stainless Steering Stop and nut. Updated design allows for two mounting positions for riders wanting more steering throw. Fits all OEM, UMI,Factory Yamaha, RRP and AC aluminum Handlepoles.
Part Number: 03-04-131
Learn More -
Blowsion Steering System without Turnplate
Blowsion Billet aluminum steering system without turnplate. Stainless Steel Turnplate shaft rides in two O-ring sealed bearings. Included special machined Blowsion Krok Kollar stainless lock nut with set screw. Fits all stock or aftermarket Yamaha design handle poles. Steering Cap and bearing housing are carbon anodized black for corrosion protection. Works with Blowsion Kawasaki and Yamaha billet shortened turnplate. Includes 7/8" Handlebar Clamps.
Part Number: 03-05-001
Learn More -
Blowsion Billet Throttle Lever
Machined with the stand-up rider comfort at a premium, our new Blowsion straight pull finger throttles are ergonomically designed for premium fit and feel whether you are on the waves or on the buoys. Available in all colors!
Learn More -
Blowsion Shortened Turnplate
Experience the improved ride and benefits of having an adjustable and shortened handlepole length without replacing your handlepole. The Blowsion billet shortened length turn plate can be combined with an OEM or aftermarket handlepole to create the perfect rider setup. Color: Anodized Black.
Part Number: 03-05-043
Learn More -
CAS Billet Aluminum Flange Only
Available for riders wanting to use the end flange only for custom scupper and rear exhaust installations etc. The new billet flange assembly is the premium design setup and allows use of the Blowsion billet exhaust outlet so vain riders can sanitize both sides of the rear of their watercraft. Fits all years Super Jet, KAWI 750 and SXR 800, KAWI 650, and Polaris Octane. Anodized Clear.
Part Number: 06-01-023
Learn More -
Blowsion CAS Billet Aluminum One Way Valve Scupper
Our new CAS (cool as S*%!) flow valve design prevents water getting in during tail stands, wave jumping, or all out buoy shredding. The new billet flange assembly allows use of our billet exhaust outlet so vain riders can sanitize both sides of the rear of their ski. Fits all years Yamaha Superjet, Kawasaki 650, Kawasaki 750, Kawasaki SXR 800, Polaris Octane, Rickter XFS, Rickter XFR, Rickter EVO, Rickter Edge and Most Aftermarket Hulls.
Part Number: 06-01-022
Learn More -
Blowsion Cross Bar Pad
Blowsion Cross Bar Pad. For use with all 7/8" inch Standup and Sport watercraft handlebars including Blowsion Kommand Bars. Pad measures 5.25 inches in length. Available in all colors!
Learn More -
Destroyer Sponsons - Kawasaki SXR / 750 / HydroSpace
The Blowsion Destroyer Sponsons are built and shaped specific to the unique hull shape of the Kawasaki SXR, 750 and HydroSpace, the Tubbie Race Destroyer for the SXR and HS is fully removable with an average 10 minute per side install! Available with Black or White Finish.
Learn More -
Blowsion Dual Cooling Kit - SXR
Blowsion Dual Cooling Kit for Kawasaki SXR 800. Includes all hardware and detailed installation instructions. Ultra Sano.
Part Number: 02-02-451
Learn More -
Blowsion Fat Bar Clamp 1-1/8"
Allows rider to retrofit Blowsion, UMI and many other steering system turn plates on the market to run the Blowsion Straight Fat, 4-Degree Fat and Fat Riser Bars.
Part Number: 03-05-018
Learn More -
Handle Pole Limiting Rope
The design of the Blowsion pole limiting rope is to STOP your pole from extending approx 2-3" from total max extension. This prevents the forward motion of the pole and riders body from destroying expensive handlepoles, pole brackets, hulls and also expensive human body parts!
Part Number: 03-04-151
Learn More -
Handlebar Extensions
Blowsion Handlebar Extensions. Add up to an additional 2 inches to your bars. Trim lines available for custom length options.
Part Number: 03-05-139
Learn More -
Blowsion SXR Heavy Duty Steering Cable
The Blowsion Heavy Duty steering cable incorporates Blue Max control cable construction. This superior control cable material is born of marine and aviation engineering design, with extreme low friction and minimal loss of motion. The Blowsion Heavy Duty replacement steering cable fits all years Kawasaki SXR 800. Overall Length: 122.00" (Inches).
Part Number: 02-05-303
Learn More -
Blowsion Billet Hood Bumper - Kawasaki SXR/750
Blowsion Direct Billet Replacement for OEM Kawsaki SXR and 750SX, SXI, & SXi-Pro hood bumpers. Anodized Black.
Learn More -
Blowsion Hood Hooks - SXR
Utilizing our many years of Super Jet Freestyle and surf quality hood hook design experience, these bulletproof SXR billet hood hooks allow for the ultimate abuse of your 2003 and newer Kawasaki SXR 800 and SXR 1500 on the race course, river or in big surf. Do not risk losing your hood -- no more tweaked or broken OEM clips bending or breaking and causing serious engine and wallet damage. Includes Stainless Steel Mounting Hardware. Color: Anodized Black.
Part Number: 04-04-101
Learn More -
Blowsion Billet Hood Latch
Replace your rear factory hood latch with a billet aluminum BLOWSION latch and ride worry free. Recently updated and re-machined to also fit the Kawasaki SXR 800 and SXR 1500. Also fits all years Yamaha FX1 and all years Yamaha Super Jet. A must for surf and big wave riders, especially those running a BLOWSION pole limiting rope. Requires the stock base locking hardware. Now available in more colors- Anodized Green, Red, Blue, Orange, Clear, Purple and Black!
Learn More