Search results for 'Year'

Blowsion Engine Leak Down Block Off Kit. This is an essential tool for determining engine health. Make sure your fresh rebuilt engine is sealed properly, or use it to diagnose engine and/or tuning issues. Utilize your existing leak down tester or plug your Pop-off pressure gauge into the pulse fitting on your cases and check for air leaks. Includes anodized aluminum plates and rubber gaskets to match. All mounting hardware included. Fits all years 62T 701 engines and 62t 760 engines with a b-pipe manifold.

Part Number: 01-03-816

Closeout Sale on Last Years Model. Blowsion Billet Flywheel Cover. Fits all OEM Yamaha Superjet 61X and 62T Crankcases. Stainless Steel Hardware and O-Ring Gasket Seal Included. Limited Quantities/Colors available.

Blowsion Custom Cut Side Rail Turf Kit. Fits all years Yamaha Superjet, FX1, Polaris Octane, Rickter and Kawasaki 650 and 750 Stand up Models. Improve the traction and looks on the side rails of your ski with our custom fit side rail covering kits. Side Rail Turf Kits Include enough material to cover the front bumper, sides, and rear corners of the side rail. Side rail kits bond directly to the fiberglass. All OEM/Stock plastic will need to be removed prior to application of side rail turf kit. For most applications a Quart of Mat Glue is recommended for installation. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

Part Number: 04-02-324

The Blowsion Billet Adjustable Handle Pole. In development and testing for over two years, this lightweight futuristic design incorporates every feature and request from not only the design group here at Blowsion, but feedback and testing as well from the top pros in racing, freeride and freestyle. This product was the definition of a team effort! Available in every color combo imaginable!

The Blowsion 148mm Aluminum Pump Shoe was designed for fitting larger 148mm pumps into both Yamaha Superjet and aftermarket hulls. Using our 148mm shoe vs a 144mm (stock Superjet size) will greatly increase hook up and drive when used in conjunction with 148mm pumps. Fits all years Yamaha Superjet, 1993-1996 WaveBlaster 1, Polaris Octane and Rickters. Mounting holes are not drilled or tapped so installation in the different Yamaha design aftermarket hulls can be facilitated.

Part Number: 02-02-434

NEW! - The Blowsion Billet Strap Hook. Replaces OEM Yamaha style waterbox, battery, and fuel tank strap hooks. Fits ALL years Yamaha Superjet, Rickter Hulls, Lightweight.DE, and many other aftermarket superjet based hull types. The Blowsion Strap Hook incorporates a removable 3mm set screw that retains the strap in place so that it cannot come off. This innovative little feature works perfectly for the hard to reach strap hooks where the straps have a tendency to come off. Price includes one hook, one M6 x 16mm bolt and a M3 x 6mm bolt. Available in Purple, Red, Black, Green, Orange, Blue and Teal Anodized Colors.

Heavy Duty Replacement Hood Seal. Fits all years Yamaha Super Jet, Yamaha FX-1, all years Polaris Octane, Yamaha Wave Blaster and most aftermarket hulls. Dimensions: L 2.7m x W 16mm x H 19mm.

Part Number: 04-04-411

6mm Throttle Cable Adapter. A Throttle Cable Adapter is required to run most aftermarket throttle levers. Fits All Years Yamaha Two Stroke and 2021+ Yamaha Superjet PWC Models. Please see list below for model compatibility.

Part Number: 03-05-242

Designed with the freestyler in mind, the freestyle pump cone allows the engine to rev faster for the big tricks. Fits all years Yamaha Superjet.

Part Number: 02-02-406

Replace your rear factory hood latch with a billet aluminum BLOWSION latch and ride worry free. Recently updated and re-machined to also fit the Kawasaki SXR 800 and SXR 1500. Also fits all years Yamaha FX1 and all years Yamaha Super Jet. A must for surf and big wave riders, especially those running a BLOWSION pole limiting rope. Requires the stock base locking hardware. Now available in more colors- Anodized Green, Red, Blue, Orange, Clear, Purple and Black!

Engine Block Off Plates 62T. A great way to block off access to your internal motor and all its complex innards. No more red rags or cheesy paper towels to suck through your initial engine fire off and carpet the cases with! Cool way for storing and displaying motors. Carbon Black Anodized and includes all mounting hardware. Fits all years 62T 701cc Yamaha two cylinder motors.

Part Number: 01-03-813

Our new CAS (cool as S*%!) flow valve design prevents water getting in during tail stands, wave jumping, or all out buoy shredding. The new billet flange assembly allows use of our billet exhaust outlet so vain riders can sanitize both sides of the rear of their ski. Fits all years Yamaha Superjet, Kawasaki 650, Kawasaki 750, Kawasaki SXR 800, Polaris Octane, Rickter XFS, Rickter XFR, Rickter EVO, Rickter Edge and Most Aftermarket Hulls.

Part Number: 06-01-022

Available for riders wanting to use the end flange only for custom scupper and rear exhaust installations etc. The new billet flange assembly is the premium design setup and allows use of the Blowsion billet exhaust outlet so vain riders can sanitize both sides of the rear of their watercraft. Fits all years Super Jet, KAWI 750 and SXR 800, KAWI 650, and Polaris Octane. Anodized Clear.

Part Number: 06-01-023

Replace that cracked and worn out stock plastic battery box with bulletproof Blowsion aluminum. Each box includes all stock location retaining clips for easy exchange. Padded bottom. Direct fit replacement for all years Yamaha Super Jet, FX1 and Polaris Octane. Can be fit as replacement to all Years Kawasaki 750 and SXR 800 with minor battery strap modifications. Color: Anodized Black

Part Number: 01-04-601