Search results for 'Year'

Items 1 to 16 of 25 total

per page

Page:
  1. 1
  2. 2
  • Leak Down Block Off Kit Yamaha (62T)

    Blowsion Engine Leak Down Block Off Kit. This is an essential tool for determining engine health. Make sure your fresh rebuilt engine is sealed properly, or use it to diagnose engine and/or tuning issues. Utilize your existing leak down tester or plug your Pop-off pressure gauge into the pulse fitting on your cases and check for air leaks. Includes anodized aluminum plates and rubber gaskets to match. All mounting hardware included. Fits all years 62T 701 engines and 62t 760 engines with a b-pipe manifold.

    Part Number: 01-03-816

    Learn More
    $85.00

  • Blowsion Billet Flywheel Cover (Last Model)

    Closeout Sale on Last Years Model. Blowsion Billet Flywheel Cover. Fits all OEM Yamaha Superjet 61X and 62T Crankcases. Stainless Steel Hardware and O-Ring Gasket Seal Included. Limited Quantities/Colors available.

    Learn More

    Regular Price: $200.00

    Sale Price $160.00

  • Side Molding 1-3/8" - Black (25FT)

    Extended Length. Made out of injection molded flexible urethane. Attaches to your watercraft with its own adhesive backing. Each kit includes special pre-wipe cleaner to promote maximum adhesion and durability. The 1-3/8" Inch size is excellent for most sitdown PWC as well as all years of Kawasaki SXR and Yamaha Super Jet. Length: 25ft

    Part Number: 04-02-307

    Learn More
    $114.95

  • Side Rail Turf Kit - Yamaha SJ / FX1 / KAW 650/750 / Rickter

    Blowsion Custom Cut Side Rail Turf Kit. Fits all years Yamaha Superjet, FX1, Polaris Octane, Rickter and Kawasaki 650 and 750 Stand up Models. Improve the traction and looks on the side rails of your ski with our custom fit side rail covering kits. Side Rail Turf Kits Include enough material to cover the front bumper, sides, and rear corners of the side rail. Side rail kits bond directly to the fiberglass. All OEM/Stock plastic will need to be removed prior to application of side rail turf kit. For most applications a Quart of Mat Glue is recommended for installation. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

    Part Number: 04-02-324

    Learn More
    $69.95

  • Blowsion Billet Handlepole

    The Blowsion Billet Adjustable Handle Pole. In development and testing for over two years, this lightweight futuristic design incorporates every feature and request from not only the design group here at Blowsion, but feedback and testing as well from the top pros in racing, freeride and freestyle. This product was the definition of a team effort! Available in every color combo imaginable!

    Learn More
    $1,450.00

  • Blowsion Pump Shoe - Yamaha 148MM

    The Blowsion 148mm Aluminum Pump Shoe was designed for fitting larger 148mm pumps into both Yamaha Superjet and aftermarket hulls. Using our 148mm shoe vs a 144mm (stock Superjet size) will greatly increase hook up and drive when used in conjunction with 148mm pumps. Fits all years Yamaha Superjet, 1993-1996 WaveBlaster 1, Polaris Octane and Rickters. Mounting holes are not drilled or tapped so installation in the different Yamaha design aftermarket hulls can be facilitated.

    Part Number: 02-02-434

    Learn More
    $169.95

  • Blowsion Billet Strap Hook

    NEW! - The Blowsion Billet Strap Hook. Replaces OEM Yamaha style waterbox, battery, and fuel tank strap hooks. Fits ALL years Yamaha Superjet, Rickter Hulls, Lightweight.DE, and many other aftermarket superjet based hull types. The Blowsion Strap Hook incorporates a removable 3mm set screw that retains the strap in place so that it cannot come off. This innovative little feature works perfectly for the hard to reach strap hooks where the straps have a tendency to come off. Price includes one hook, one M6 x 16mm bolt and a M3 x 6mm bolt. Available in Purple, Red, Black, Green, Orange, Blue and Teal Anodized Colors.

    Learn More
    $18.00

  • Mat Kit - Stitched - Klowner Footwells - Yamaha Superjet (1996-2020)

    Glue On! Includes bottom, sides, dash and undermat foam. Fits all years 1996-2020 Yamaha Superjet Models with Klowner Composite Footwells. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

    Part Number: 04-02-085

    Learn More
    $249.95

  • Mat Kit - Stitched - Digger Footwells - Yamaha Superjet (1996-2020)

    Glue On! Includes bottom, sides, dash and undermat foam. Fits all years 1996-2020 Yamaha Superjet Models with Digger Composite Footwells. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

    Part Number: 04-02-082

    Learn More
    $249.95

  • Mat Kit - Stitched - Kicker Footwells - Yamaha Superjet (1996-2020)

    Glue On! Includes bottom, sides, dash and undermat foam. Fits all years 1996-2020 Yamaha Superjet Models with Kicker Composite Footwells. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

    Part Number: 04-02-083

    Learn More
    $249.95

  • Side Molding 1" - Chrome

    Made out of injection molded flexible urethane. Attaches to your watercraft with its own adhesive backing. Each kit includes special pre-wipe cleaner to promote maximum adhesion and durability. The 1" inch size is perfect for all years KAWI SXi/SXi Pro and all years Super Jet.

    Part Number: 04-02-303

    Learn More
    $74.95

  • Side Molding 1" - Black

    Made out of injection molded flexible urethane. Attaches to your watercraft with its own adhesive backing. Each kit includes special pre-wipe cleaner to promote maximum adhesion and durability. The 1" size is perfect for all years Kawasaki 750SX, SXi, SXi-Pro and All years Yamaha Superjet.

    Part Number: 04-02-302

    Learn More
    $69.95

  • Side Molding 1-3/8" - Black

    Made out of injection molded flexible urethane. Attaches to your watercraft with its own adhesive backing. Each kit includes special pre-wipe cleaner to promote maximum adhesion and durability. The 1-3/8" Inch size is excellent for most sitdown PWC as well as all years of Kawasaki SXR and Yamaha Super Jet.

    Part Number: 04-02-300

    Learn More
    $74.95

  • Blowsion Hood Seal

    Heavy Duty Replacement Hood Seal. Fits all years Yamaha Super Jet, Yamaha FX-1, all years Polaris Octane, Yamaha Wave Blaster and most aftermarket hulls. Dimensions: L 2.7m x W 16mm x H 19mm.

    Part Number: 04-04-411

    Learn More
    $35.95

  • Throttle Adapter - Yamaha (6mm)

    6mm Throttle Cable Adapter. A Throttle Cable Adapter is required to run most aftermarket throttle levers. Fits All Years Yamaha Two Stroke and 2021+ Yamaha Superjet PWC Models. Please see list below for model compatibility.

    Part Number: 03-05-242

    Learn More
    $13.95

  • Pump Cone - Yamaha Superjet

    Designed with the freestyler in mind, the freestyle pump cone allows the engine to rev faster for the big tricks. Fits all years Yamaha Superjet.

    Part Number: 02-02-406

    Learn More
    $55.00

Items 1 to 16 of 25 total

per page

Page:
  1. 1
  2. 2