Search results for 'Year'

Blowsion Engine Leak Down Block Off Kit. This is an essential tool for determining engine health. Make sure your fresh rebuilt engine is sealed properly, or use it to diagnose engine and/or tuning issues. Utilize your existing leak down tester or plug your Pop-off pressure gauge into the pulse fitting on your cases and check for air leaks. Includes anodized aluminum plates and rubber gaskets to match. All mounting hardware included. Fits all years 62T 701 engines and 62t 760 engines with a b-pipe manifold.

Part Number: 01-03-816

Closeout Sale on Last Years Model. Blowsion Billet Flywheel Cover. Fits all OEM Yamaha Superjet 61X and 62T Crankcases. Stainless Steel Hardware and O-Ring Gasket Seal Included. Limited Quantities/Colors available.

Extended Length. Made out of injection molded flexible urethane. Attaches to your watercraft with its own adhesive backing. Each kit includes special pre-wipe cleaner to promote maximum adhesion and durability. The 1-3/8" Inch size is excellent for most sitdown PWC as well as all years of Kawasaki SXR and Yamaha Super Jet. Length: 25ft

Part Number: 04-02-307

Blowsion Custom Cut Mat Kit. Glue it On! Fits all years Kawasaki 650SX Standups. Includes bottom, tray sides, dash, footwell mat pieces, and undermat foam. Kicker Footwells not included. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

Part Number: 04-02-135

Blowsion Custom Cut Mat Kit. Glue it on! Fits all years Kawasaki 650SX Standup with stock sides. Includes bottom, tray sides, dash and undermat foam. Check out the new Dual Color Turf option now available! See special formulated solvent-based mat glue for installation. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

Part Number: 04-02-133

Blowsion Custom Cut Side Rail Turf Kit. Fits all years Kawasaki SXR 800. Improve the traction and looks on the side rails of your ski with our custom fit side rail covering kits. Side Rail Turf Kits Include enough material to cover the front bumper, sides, and rear corners of the side rail. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

Part Number: 04-02-323

Blowsion Custom Cut Side Rail Turf Kit. Fits all years Yamaha Superjet, FX1, Polaris Octane, Rickter and Kawasaki 650 and 750 Stand up Models. Improve the traction and looks on the side rails of your ski with our custom fit side rail covering kits. Side Rail Turf Kits Include enough material to cover the front bumper, sides, and rear corners of the side rail. Side rail kits bond directly to the fiberglass. All OEM/Stock plastic will need to be removed prior to application of side rail turf kit. For most applications a Quart of Mat Glue is recommended for installation. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

Part Number: 04-02-324

Blowsion Custom Cut Mat Kit. Glue it On! Fits all years Kawasaki SXR with Klowner Footwells. Kit Includes bottom, tray sides, dash and undermat foam. Available in Single Color, Dual Layer Diamond or Waffle. Klowner Footwells are not included. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

Blowsion Custom Cut Mat Kit. Glue it On! Fits all years Kawasaki SXR 800 with Masher Footwells. Kit Includes bottom, tray sides, dash and undermat foam. Available in Single Color, Dual Layer Diamond or Waffle. Masher Footwells are not included. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

Blowsion Custom Cut Mat Kit. Glue it On! Fits all years Kawasaki SXR with Kicker Footwells. Kit Includes bottom, tray sides, dash and undermat foam. Available in Single Color, Dual Layer Diamond or Waffle. Kicker Footwells are not included. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

Blowsion Custom Cut Mat Kit. Glue it On! Fits all years Kawasaki SXR with stock tray. Kit Includes bottom, tray sides, dash and undermat foam. Available in Single Color, Dual Layer Diamond or Waffle. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

Blowsion Custom Cut Mat Kit. Glue it on! Fits all years Kawasaki JS Model 300, 440 and 550/550sx. Includes bottom, tray sides, dash and undermat foam. Check out the new Dual Color Turf option now available! See special formulated solvent-based mat glue for installation. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

Part Number: 04-02-137

The Blowsion Billet Adjustable Handle Pole. In development and testing for over two years, this lightweight futuristic design incorporates every feature and request from not only the design group here at Blowsion, but feedback and testing as well from the top pros in racing, freeride and freestyle. This product was the definition of a team effort! Available in every color combo imaginable!

Glue On! Includes bottom, sides, dash and undermat foam. Fits all years Kawasaki SXR 1500 Models. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.

Part Number: 04-02-146

The Blowsion 148mm Aluminum Pump Shoe was designed for fitting larger 148mm pumps into both Yamaha Superjet and aftermarket hulls. Using our 148mm shoe vs a 144mm (stock Superjet size) will greatly increase hook up and drive when used in conjunction with 148mm pumps. Fits all years Yamaha Superjet, 1993-1996 WaveBlaster 1, Polaris Octane and Rickters. Mounting holes are not drilled or tapped so installation in the different Yamaha design aftermarket hulls can be facilitated.

Part Number: 02-02-434