Search results for 'Sxr 800'
-
Handle Pole Spring - Yamaha Superjet 1996+
Blowsion Heavy duty handlepole spring for the 96+ Yamaha SuperJet / 1994-1995 Yamaha FX1 / Rickter / Polaris Octane / Kawasaki Conversions. Drop in fit and well high tension design for those riders desiring a feather light handlepole.
Part Number: 03-04-012
Learn More -
Handle Pole Spring - Kawasaki 750 / SXR
Blowsion Heavy Duty Direct Replacement Pole Spring for the Kawasaki SXR and 750 Models. High tension designed to lighten both OEM fiberglass and aftermarket aluminum handlepoles. Fits All Years 1992-2002 Kawasaki 750 SX/SXi/SXi-Pro, 2003-2011 Kawasaki SXR 800 and 2017 and newer Kawasaki SXR 1500 Models.
Part Number: 03-04-003
-
Hood Baffle Air Intake - Tube and Flange Kit
Direct water and air to where you want it in the engine compartment! Drop Tube and Urethane Flange for Hood Baffle Air Intakes. Use with either aftermarket hoods or stock factory hood to increase air flow. Each kit includes three oversize lengths of hose tubing and urethane flanges. Bond-able to hand laid fiberglass, carbon, SMC or ABS inner liners these are simple to install and are an excellent answer for air-starved motors. An EXCELLENT choice for the Kawasaki SXR 800 with the Factory Pipe installed!
Part Number: 05-02-199
Learn More -
Hydro-Turf Kick Wedge 1"
Add a kick tail to your watercraft bottom mat area with this 1" wedge. Helps to keep the riders back foot from slipping out of the tray and getting weight farther forward.
Part Number: 04-02-345
Learn More -
Hydro-Turf Sheet - Diamond
Hydro-Turf 40" x 62" Diamond Groove sheet material. Blowsion stocks all available colors and groove options listed. We are overflowing with turf!
See our special formulated solvent-based Mat Glue for Installation.
Learn More -
Hydro-Turf Sheet - Waffle
Hydro Turf 40" x 49" Waffle Groove sheet material. Blowsion stocks all available colors listed. We are overflowing with turf!
See our special formulated solvent-based Mat Glue for Installation.
Learn More -
Impeller Shaft Tool - Kawasaki / Superjet 2021+
Kawasaki Impeller Shaft Tool. Holds spline of Impeller Shaft for removal of impeller. Fits all 1992 and newer Kawasaki models and 2021+ Yamaha Superjet.
Part Number: 06-04-021
Learn More -
Installation Materials Kit - Footwells / Hull Reinforcement
Each kit includes all materials needed for mixing into, and handling, your installation resin (available separately). Silica Thickener, Mixing Cups, Brushes, Gloves and Knitted fabric cloth for all seams.
Part Number: 06-03-113
Learn More -
Jet Dynamics Ride Plate - 750SXi-Pro / SXR - Extended Length
JET DYNAMICS 165 lbs. & up rider weight. Machined to fit both the Kawasaki SXi-Pro AND the Kawasaki SXR 800.
Part Number: 02-01-204
Learn More -
Jet Dynamics Ride Plate - 750 SXi-Pro / SXR
The patented Jet Dynamics concave ride plate design is the best all around replacement ride plate we have found for the Kawasaki SXI-Pro and SXR 800 rider who tears up the surf, rips the occasional buoy, and shreds flat water.
Part Number: 02-01-203
Learn More -
Jetinetics Lightweight Charging Flywheel - Kawasaki
Want to feel the bottom end of your 750 SXI or SXR 800 snap your neck back? The Jetinetics lightened charging flywheel is the way to go. Retains OEM charging capabilities but lightens the rotating mass for unreal bottom end response.
Part Number: 01-04-208
Learn More -
ADA Angled Reed Spacers - Kawasaki SXR / 750
3 degree angled reed spacer kit for the Kawasaki 800 and 750 engines. Includes billet aluminum spacers, gaskets, and studs. Both spacers now include a pulse fitting. The studs that are included are for the stock intake manifold. If you are using an aftermarket intake, you may need to use longer studs if the manifold is thicker that stock. Fits Kawasaki 800SXR, 750SX, 750SXi, 750SXi Pro Models.
Part Number: 31-130390
Learn More -
Blowsion Kick Plate
An ultra bitchin' way to keep your rear edge tray mat wrapped and sealed down. Excellent solution to a problem area for all mat installations. Available for all models.
Learn More -
Marine Sealant Tube - Black (240ML)
The key to installing Tubbie Sponsons, Railcaps and other composite accessories on your watercraft. Easy-to-use tube fits a standard caulking gun. Fast-set formula dries tack-free in 90 minutes and delivers extremely tough bonds. Color: Black.
Part Number: 06-03-136
Learn More