Search results for 'pump'
-
Bilge Fitting 45-Degree
Blowsion 45-Degree machined aluminum bilge fittings are a clean replacement of the bulky plastic fittings usually supplied with aftermarket bilge pump kits. Available in Anodized Black or Clear.
Learn More -
Bilge Fitting Straight
Blowsion machined aluminum straight bilge fittings are a clean replacement of the bulky plastic fittings usually supplied with aftermarket bilge pump kits. Available in Clear, Black, Green, Red, Blue & Orange anodized colors.
Learn More -
Bilge Pump - Rule - 500GPH
Rule Non-Automatic 500GPH Fully Submersible 12 Volt DC bilge pump. Unmatched in pumping power and longevity. Higher Flow – optimized impeller to provide greater flow at the same amperage. Back Flow Prevention - reduces the amount of water left over in the bilge, reducing odor and helping keep your bilge cleaner. Easy to mount and ready to go!
Part Number: 06-01-001
Learn More -
Bilge Pump Hose - 10FT
Blowsion Bilge Pump Hose - 10 Foot Section is plenty for most dual pump and custom applications. Color: Black Only. Hose Diameter (ID): 3/4" inch.
Part Number: 06-01-302
Learn More -
Bilge Pump Hose - 3FT
Blowsion Bilge Pump Hose - 3 Foot Section is plenty for most single pump applications. Color: Black Only. Hose Diameter (ID): 3/4" inch.
Part Number: 06-01-301
Learn More -
Blowsion Billet Trim Lever
Blowsion Billet Trim Lever - Left hand operated spring loaded trim lever for pump freestyle/freeride tilt or racing trim systems. Ergonomically designed for premium fit and feel whether you are on the waves or on the buoys. Now available in all colors!
Learn More -
Bilge Pump - Rule - 500GPH Automatic
Rule 25SA Fully Submersible Bilge Pump, 500 Gallon Per Hour, 12 Volt DC, Automatic Electronic Sensing. Bilge Pump turns on and checks for water approximately every 2-1/2 minutes. If resistance (water) is found, it will run for as long as water is present. When all the water is pumped out, the pump shuts off and returns to its 2-1/2 minute test cycle.
Part Number: 06-01-002
Learn More -
Oil / Fluid Extractor (6 Liter)
Oil / Fluid Extractor (6 Liter). This compact and easy to use oil/fluid extractor makes changing the oil on your 4-stroke model clean and hassle free. Sturdy portable container holds up to 6 liters (1.57 Gallons). Carry handle makes for easy transfer to recycling tank. Pump included.
Part Number: 06-04-088
Learn More -
Solas Magnum Pump - Kawasaki SXR 1500
The SOLAS 12 Vane Stainless Steel Magnum Pump is a direct bolt-on performance upgrade. The one piece investment cast stainless steel pump offers improved bottom end acceleration, improved hook-up, and up to 2 mph top speed gain over the OEM Kawasaki SXR 1500 pump. Pump Includes bearings, seals, shaft and pump cone.
Part Number: 02-02-024
Learn More -
Bilge Pump Mount - Kawasaki SXR 1500
The Blowsion Bilge Pump Mount is designed to mount the Rule Bilge Pump (Sold Separately). The bracket mounts to the lower two bolts of the driveshaft bearing carrier. Includes rivets to mount bilge pump strainer to bracket. Fits all Kawasaki SXR 1500 Models. Material: Aluminum. Color: Anodized Black.
Part Number: 06-01-104
Learn More -
BMS Impeller Shaft Tool - Kawasaki SXR 1500
Broward Motorsports Prop Removal Tool for the Kawasaki SXR 1500. Tired of damaging your pump shaft every time you put it in a vice to remove your prop? Those days are over! Broward Motorsports has designed the most advanced tool for holding your impeller shaft in a vice while breaking that hard to remove impeller!
Part Number: BM41-60-8
Learn More -
Bilge Fitting Pro
Blowsion machined aluminum 3/4 inch bilge fittings are a clean replacement of the bulky plastic fittings usually supplied with aftermarket bilge pump kits. Available in Clear, Black, Green, Red, Blue, Orange and Purple anodized colors.
Learn More -
Solas Magnum Pump Assembly - Kawasaki SXR 1500
The Solas KGX-PM-148/74T 12-Vane Stainless Steel Jet Pump is a direct bolt-on performance upgrade. The one-piece, investment cast stainless steel pump offers increased bottom-end acceleration, improved hook-up, and up to 2mph top speed gain over the OEM pump. Oversized bearing housing supports and includes 3 high-quality sealed bearings, seals, shaft and billet aluminum pump cone. Complete Kit includes reduction nozzle and return assisted trim/steering nozzle along with interchangeable nozzle rings for fine tuning.
Part Number: 02-02-025
Learn More -
Solas KGX Pump Rebuild Kit SXR 1500
Solas Magnum Pump Bearing Seal Rebuild kit for Kawasaki SXR 1500 KGX Pumps. Includes bearings and Seals.
Part Number: 02-02-026
Learn More -
WSM Pump Trim Seal - Kawasaki ZXi / STX / SXR 1500
WSM Aftermarket Pump Trim Seal for 1995-2024 Kawasaki ZXI, STX and SXR 1500 Models. Manufactured to OEM specifications. Replaces OEM Kawasaki PN# 39145-3742.
Part Number: 003-551
Learn More