Search results for 'billet'
-
Billet Drive Couplers - Kawasaki
Kawasaki billet driveline couplers. Machined from 6061- T6 aluminum for superior strength and durability. The threads are the standard 20-1.5mm that fits the SXR crankshaft and driveshaft. These are sold as a set. Anodized Clear.
Part Number: 02-02-204
Learn More -
Billet Carburetor Block Off
Sanitary anodized and engraved Blowsion logo carburetor block off. A necessity when using a remote fuel pump. Fits all Mikuni carbs. Billet aluminum with all stainless hardware included.
Part Number: 01-02-557
Learn More -
Blowsion Dash Knob - Kawasaki
Blowsion Billet Dash Knob. Direct replacement for OEM Kawasaki Plastic Knobs. Bright Dip Anodized. 1 Per Package. Fit all Kawasaki 750 Sxi and SXR 800 Models. Sanitize your dash--the finishing touch when also combined with our billet dashboard plates on the 750 Sxi. (NOTE: Not to be used as Star Trek badge Identification.)
Learn More -
Blowsion Billet Fuel Filler Neck - Kawasaki
Blowsion Billet aluminum fuel cap socket filler neck. Fits all years Kawasaki SXR 800, SXR 1500, 750 SX, SXI and SXI Pro, ZXi, and STX models. Works with stock plastic or aftermarket billet gas caps. Available in Black or Clear.
Learn More -
Blowsion Billet Fuel Cap - Kawasaki
New Low Profile Lightweight Design. Sanitary and functional with integrated chain clip. The Blowsion Billet aluminum Kawasaki fuel caps fit all Kawasaki standups and most sit-downs. Vortex design shape with engraved grooving allows for easy handling. Available in all colors!
Learn More -
Blowsion Steering System without Turnplate
Blowsion Billet aluminum steering system without turnplate. Stainless Steel Turnplate shaft rides in two O-ring sealed bearings. Included special machined Blowsion Krok Kollar stainless lock nut with set screw. Fits all stock or aftermarket Yamaha design handle poles. Steering Cap and bearing housing are carbon anodized black for corrosion protection. Works with Blowsion Kawasaki and Yamaha billet shortened turnplate. Includes 7/8" Handlebar Clamps.
Part Number: 03-05-001
Learn More -
Blowsion Billet Throttle Lever
Machined with the stand-up rider comfort at a premium, our new Blowsion straight pull finger throttles are ergonomically designed for premium fit and feel whether you are on the waves or on the buoys. Available in all colors!
Learn More -
Blowsion Shortened Turnplate
Experience the improved ride and benefits of having an adjustable and shortened handlepole length without replacing your handlepole. The Blowsion billet shortened length turn plate can be combined with an OEM or aftermarket handlepole to create the perfect rider setup. Color: Anodized Black.
Part Number: 03-05-043
Learn More -
CAS Billet Aluminum Flange Only
Available for riders wanting to use the end flange only for custom scupper and rear exhaust installations etc. The new billet flange assembly is the premium design setup and allows use of the Blowsion billet exhaust outlet so vain riders can sanitize both sides of the rear of their watercraft. Fits all years Super Jet, KAWI 750 and SXR 800, KAWI 650, and Polaris Octane. Anodized Clear.
Part Number: 06-01-023
Learn More -
Blowsion CAS Billet Aluminum One Way Valve Scupper
Our new CAS (cool as S*%!) flow valve design prevents water getting in during tail stands, wave jumping, or all out buoy shredding. The new billet flange assembly allows use of our billet exhaust outlet so vain riders can sanitize both sides of the rear of their ski. Fits all years Yamaha Superjet, Kawasaki 650, Kawasaki 750, Kawasaki SXR 800, Polaris Octane, Rickter XFS, Rickter XFR, Rickter EVO, Rickter Edge and Most Aftermarket Hulls.
Part Number: 06-01-022
Learn More -
Blowsion Billet Hood Bumper - Kawasaki SXR/750
Blowsion Direct Billet Replacement for OEM Kawsaki SXR and 750SX, SXI, & SXi-Pro hood bumpers. Anodized Black.
Learn More -
Blowsion Billet Hood Latch
Replace your rear factory hood latch with a billet aluminum BLOWSION latch and ride worry free. Recently updated and re-machined to also fit the Kawasaki SXR 800 and SXR 1500. Also fits all years Yamaha FX1 and all years Yamaha Super Jet. A must for surf and big wave riders, especially those running a BLOWSION pole limiting rope. Requires the stock base locking hardware. Now available in more colors- Anodized Green, Red, Blue, Orange, Clear, Purple and Black!
Learn More -
Blowsion Pole Bracket - Dual Hole
Blowsion Dual Hole Billet Lowered Pole Bracket for Blowsion and RRP Handlepoles. Lowered billet aluminum handlepole pivot bracket for 1996-2020 Yamaha Superjet, 1994-1995 Yamaha FX1, 2002-2004 Polaris Octane and Kawasaki 750 Pole Conversions. There is no match on the market today for durability and performance. Now available in all colors!
Learn More -
Blowsion Pole Bracket - Single Hole
Blowsion lowered billet aluminum handlepole pivot bracket for 1996-2020 Yamaha Superjet, 1994-1995 Yamaha FX1, 2002-2004 Polaris Octane and Kawasaki 750 Pole Conversions. Color: Anodized Black
Part Number: 03-03-003
Learn More -
Blowsion Billet Trim Lever
Blowsion Billet Trim Lever - Left hand operated spring loaded trim lever for pump freestyle/freeride tilt or racing trim systems. Ergonomically designed for premium fit and feel whether you are on the waves or on the buoys. Now available in all colors!
Learn More -
Cold Fusion Flywheel Lock - Kawasaki
Cold Fusion Billet Kawasaki Flywheel Lock (FL-CF). Fits Kawasaki 750 and 800 motors. The safest way to remove engine couplers and flywheel bolts without risking damage to other engine components.
Part Number: 06-04-017
Learn More