Search results for 'ADA'

Replacement ADA Head O-Ring Kit for Kawasaki 750/800

Part Number: 01-03-204

Kawasaki billet driveline couplers. Machined from 6061- T6 aluminum for superior strength and durability. The threads are the standard 20-1.5mm that fits the SXR crankshaft and driveshaft. These are sold as a set. Anodized Clear.

Part Number: 02-02-204

Blowsion logo Outerwears flame arrestor water-resistant screens. Specifically formulated to prevent water ingress. Available for tapered tornado filters. Sold Each.

3 degree angled reed spacer kit for the Kawasaki 800 and 750 engines. Includes billet aluminum spacers, gaskets, and studs. Both spacers now include a pulse fitting. The studs that are included are for the stock intake manifold. If you are using an aftermarket intake, you may need to use longer studs if the manifold is thicker that stock. Fits Kawasaki 800SXR, 750SX, 750SXi, 750SXi Pro Models.

Part Number: 31-130390

Prok Multi-Fit Universal Flame Arrestor. 4" Round x 2" Tall. Prok's high-flow aftermarket air filters feature an internal vortex-shaped cone and rolled intake edge for unrestricted airflow. Prok's Air Filters greatly improve low speed idle and acceleration. Reminder- You will also need our Flame Arrestor Adapters and we also highly recommend Outerwears for a moisture barrier in freeride/freestyle applications.

Part Number: 01-02-021

8mm Throttle Cable adapter necessary for Kawasaki models from 1996 and up. Fits all 1996 and Newer Kawasaki PWC Models. Please see list below for model compatibility.

Part Number: 03-05-241

Billet carb adaptors in stock and available to fit Kawasaki SXR 800 and Late Model (1998-2002) Kawasaki 750 SXi-Pro with dual Mikuni carbs. Required for adapting to aftermarket air filters / flame arrestors. Flange Outer Diameter: 2.75 (inches).

Part Number: 01-02-075

ADA Racing Billet aluminum front oil injection cover for Kawasaki ZXI 1100 Triples. Includes stainless mounting hardware and o-ring.

Part Number: 01-03-809

Jet Renu “Purple” Wash and Wax is the ultimate high foaming premium soap which is fortified with 100% Brazilian Carnauba Wax. “Purple” cleans deep down into the gel coat and painted surface, lifts away caked on dirt and grime while leaving behind a high gloss shine and a protective barrier from the sun’s harmful UV rays. Our super concentrated formula is pH balanced, biodegradable and non-toxic. Size: 1 Gallon.

Part Number: JR-1002

Jet Renu “Green” All Purpose Cleaner was formulated to cut through those tough grime stains on many different types of surfaces and materials. “Green” works safely on vinyl seats, upholstery, carpet, tires and any scuff marks. “Green” also removes exhaust residue on your painted surface. Our all-purpose cleaner is like no other product. “Green” powers through built up dirt and grime with a pleasant lemon scent. Just spray on, wipe off, environmentally safe, non-toxic and biodegradable. Size: 1 Gallon.

Part Number: JR-1023

Boyesen Extreme Velocity Intake Manifold Kit for Kawasaki 750 and SXR 800 Engines. High quality Cast Aluminum Dual Intake Manifold allows optimized installation of aftermarket performance carbs. Kit includes (1) precision cast aluminum intake manifold, (2) "EV" RAD Valves, (1) carb adapter plate and all necessary installation hardware.

Part Number: IM-002AKIT

ADA Racing billet dome includes compression(OR042) and dome top(OR020) orings. Squish relief is .005 inch @ 82.5mm(fits up to 83mm piston) with a 4 degree angle. These domes fit ADA Racing standard 750/800 head and ADA Racing original girdled head with the billet brackets.

ADA Racing 3 degree angled reed spacer kit for the Kawasaki 900 and 1100 engines. Includes billet aluminum spacers, gaskets, and studs. All 3 spacers now include a pulse fitting. The studs that are included are for the stock intake manifold. If you are using an aftermarket intake, you may need to use longer studs if the manifold is thicker that stock.

Part Number: 31-131390

Billet Cylinder Head for the Kawasaki 750 and SXR 800. All ADA Racing billet heads are made from 6061-T6 aluminum and CNC machined for consistency and performance. Anodized for durability and protection against salt-water corrosion. This is the head shell only. Includes orings that fit into the grooves in the head shell and brass fittings.

Billet Girdled Cylinder Head for the Kawasaki 750 and 800. CNC machined at ADA Racing from 6061-T6 aluminum. Anodized for protection against corrosion. This is the head shell only and includes o-rings that fit into the grooves in the head shell and brass fittings.