Search results for 'billet'
-
Blowsion 1-Piece Cylinder Head - Yamaha
New low cost one piece billet cylinder head. Anodized for corrosion protection with Blowsion Engraved logos. For 701 / 760 / 850 Yamaha Engines. NOTE: Cylinder Head Domes, Optional Hardware Kit, Optional Girdle Kit and Optional Color Anodized Head Insert are all sold separately.
Learn More -
Blowsion Steering System without Turnplate
Blowsion Billet aluminum steering system without turnplate. Stainless Steel Turnplate shaft rides in two O-ring sealed bearings. Included special machined Blowsion Krok Kollar stainless lock nut with set screw. Fits all stock or aftermarket Yamaha design handle poles. Steering Cap and bearing housing are carbon anodized black for corrosion protection. Works with Blowsion Kawasaki and Yamaha billet shortened turnplate. Includes 7/8" Handlebar Clamps.
Part Number: 03-05-001
Learn More -
Blowsion Billet Throttle Lever
Machined with the stand-up rider comfort at a premium, our new Blowsion straight pull finger throttles are ergonomically designed for premium fit and feel whether you are on the waves or on the buoys. Available in all colors!
Learn More -
Blowsion Shortened Turnplate
Experience the improved ride and benefits of having an adjustable and shortened handlepole length without replacing your handlepole. The Blowsion billet shortened length turn plate can be combined with an OEM or aftermarket handlepole to create the perfect rider setup. Color: Anodized Black.
Part Number: 03-05-043
Learn More -
CAS Billet Aluminum Flange Only
Available for riders wanting to use the end flange only for custom scupper and rear exhaust installations etc. The new billet flange assembly is the premium design setup and allows use of the Blowsion billet exhaust outlet so vain riders can sanitize both sides of the rear of their watercraft. Fits all years Super Jet, KAWI 750 and SXR 800, KAWI 650, and Polaris Octane. Anodized Clear.
Part Number: 06-01-023
Learn More -
Blowsion CAS Billet Aluminum One Way Valve Scupper
Our new CAS (cool as S*%!) flow valve design prevents water getting in during tail stands, wave jumping, or all out buoy shredding. The new billet flange assembly allows use of our billet exhaust outlet so vain riders can sanitize both sides of the rear of their ski. Fits all years Yamaha Superjet, Kawasaki 650, Kawasaki 750, Kawasaki SXR 800, Polaris Octane, Rickter XFS, Rickter XFR, Rickter EVO, Rickter Edge and Most Aftermarket Hulls.
Part Number: 06-01-022
Learn More -
Blowsion Case Cranker
Blowsion Billet Crankcase Reinforcement for Yamaha Stroker crankshafts.
Part Number: 01-03-820
Learn More -
Destroyer Sponsons - Superjet 2008+ / FX-1
Trying to improve on an already amazing product? The new Tubbie Destroyer sponson design is simply the Ferrari of the Blowsion original Tubbie Freeride sponsons. Built and shaped specific to the unique hull shape of the 2008 and Newer Yamaha SuperJet and FX1. Available in White or Black.
Learn More -
FX-1 Billet Hood Bracket Clip
Blowsion FX1 Billet Hood Bracket Clip. Required when installing Blowsion Billet Handlepole Bracket on the Yamaha FX1. NOTE: Does not work with dual hole pole brackets.
Part Number: 03-03-021
Learn More -
Blowsion Billet Hood Bumper - Kawasaki SXR/750
Blowsion Direct Billet Replacement for OEM Kawsaki SXR and 750SX, SXI, & SXi-Pro hood bumpers. Anodized Black.
Learn More -
Blowsion Hood Hooks - SXR
Utilizing our many years of Super Jet Freestyle and surf quality hood hook design experience, these bulletproof SXR billet hood hooks allow for the ultimate abuse of your 2003 and newer Kawasaki SXR 800 and SXR 1500 on the race course, river or in big surf. Do not risk losing your hood -- no more tweaked or broken OEM clips bending or breaking and causing serious engine and wallet damage. Includes Stainless Steel Mounting Hardware. Color: Anodized Black.
Part Number: 04-04-101
Learn More -
Blowsion Billet Hood Latch
Replace your rear factory hood latch with a billet aluminum BLOWSION latch and ride worry free. Recently updated and re-machined to also fit the Kawasaki SXR 800 and SXR 1500. Also fits all years Yamaha FX1 and all years Yamaha Super Jet. A must for surf and big wave riders, especially those running a BLOWSION pole limiting rope. Requires the stock base locking hardware. Now available in more colors- Anodized Green, Red, Blue, Orange, Clear, Purple and Black!
Learn More -
Blowsion Pole Bracket Superjet 1990-1995
Blowsion Billet 6061 aluminum replacement for the cast factory OEM bracket on all 1995 and older Yamaha Super Jets. Oversize length of breather tubing included. Includes oversize cable routing hole for installing the handlepole breather tubing. Blowsion design also includes handlepole spring mounting hole for riders that desire a light pole set up. Totally sanitary and necessary upgrade from the feeble cast aluminum OEM bracket.
Part Number: 03-03-002
Learn More -
Blowsion Pole Bracket - Dual Hole
Blowsion Dual Hole Billet Lowered Pole Bracket for Blowsion and RRP Handlepoles. Lowered billet aluminum handlepole pivot bracket for 1996-2020 Yamaha Superjet, 1994-1995 Yamaha FX1, 2002-2004 Polaris Octane and Kawasaki 750 Pole Conversions. There is no match on the market today for durability and performance. Now available in all colors!
Learn More -
Blowsion Pole Bracket - Single Hole
Blowsion lowered billet aluminum handlepole pivot bracket for 1996-2020 Yamaha Superjet, 1994-1995 Yamaha FX1, 2002-2004 Polaris Octane and Kawasaki 750 Pole Conversions. Color: Anodized Black
Part Number: 03-03-003
Learn More -
Blowsion Billet Trim Lever
Blowsion Billet Trim Lever - Left hand operated spring loaded trim lever for pump freestyle/freeride tilt or racing trim systems. Ergonomically designed for premium fit and feel whether you are on the waves or on the buoys. Now available in all colors!
Learn More