Search results for 'R'
-
Bilge Switch - Start Stop Switch Mount - Kawasaki
This Sano Bilge Switch Mounts Directly to the Bottom of the OEM Start / Stop Switch Housing on most Kawasaki Watercraft. Does not work on JS300, JS650 or X2 models.
Part Number: 06-01-213
Learn More -
Bilge Switch - Handlebar Mount - Universal
Universal Handle Bar Mount Bilge Switch. Fits any watercraft handle bars on the market. Anodized Black.
Part Number: 06-01-212
Learn More -
Bilge Switch - Start Stop Switch Mount - Yamaha
Blowsion Bilge Switch Stop / Start Switch Mount - Yamaha. This sano billet switch assembly mounts directly to the bottom of the OEM Start / Stop switch housing of all Yamaha watercraft.
Part Number: 06-01-214
Learn More -
Billet Drive Couplers - Kawasaki
Kawasaki billet driveline couplers. Machined from 6061- T6 aluminum for superior strength and durability. The threads are the standard 20-1.5mm that fits the SXR crankshaft and driveshaft. These are sold as a set. Anodized Clear.
Part Number: 02-02-204
Learn More -
Billet Drive Couplers - Yamaha
Yamaha Billet Driveline Couplers. Updated design for 2018! These are now lighter and have built-in hex for easy installation with an adjustable wrench. Fits all Yamaha Superjet and WaveBlaster Models except for 1991 and some 1992 Yamaha 650 SJ's. Machined from 6061-T6 aluminum for superior strength and durability. Made in USA! Color: Anodized Clear
Part Number: 02-02-251
Learn More -
Black Mamba Exhaust Hose
This Heavy Duty Rear Exhaust Hose replaces the expensive and prone to fail OEM Yamaha Superjet Exhaust Hose.
Part Number: 01-01-705
Learn More -
Blowsion Pump Shoe - Yamaha 144MM
Blowsion Aluminum Pump Shoe for Yamaha 144mm Pumps. Replace that easily broken OEM plastic intake duct with this unbreakable aluminum replacement. Fits all years Yamaha Superjet, 1993-1996 WaveBlaster 1, Polaris Octane and Rickters. Mounting holes are not drilled or tapped so install in the different Yamaha design aftermarket hulls can be facilitated.
Part Number: 02-02-432
Learn More -
Blowsion Battery Box
Replace that cracked and worn out stock plastic battery box with bulletproof Blowsion aluminum. Each box includes all stock location retaining clips for easy exchange. Padded bottom. Direct fit replacement for all years Yamaha Super Jet, FX1 and Polaris Octane. Can be fit as replacement to all Years Kawasaki 750 and SXR 800 with minor battery strap modifications. Color: Anodized Black
Part Number: 01-04-601
Learn More -
Blowsion Cylinder Sleeve - Yamaha 785
Yamaha 785 SuperJet 84-86.5mm Big Bore Sleeves. Performance Pre-Ported. To be used with stock stroke through 6 mil stroker motors. Blowsion custom designed include a wider exhaust port, wider boost port, deeper transfers and a narrowed skirt. Sold Each.
Part Number: 01-03-451
Learn More -
Blowsion Cylinder Sleeve - Yamaha 850
Yamaha SuperJet 850 Big Bore Sleeves. Fits 89mm to 91mm Piston. Performance Pre-Ported. To be used with stock stroke through 6 mil stroker motors. Blowsion custom designed include a wider exhaust port, wider boost port, deeper transfers and a narrowed skirt.
Part Number: 01-03-452
Learn More -
Billet Carburetor Block Off
Sanitary anodized and engraved Blowsion logo carburetor block off. A necessity when using a remote fuel pump. Fits all Mikuni carbs. Billet aluminum with all stainless hardware included.
Part Number: 01-02-557
Learn More -
Billet Choke Knob - Yamaha
Blowsion Billet Choke Knob. Direct replacement for YAMAHA OEM Plastic choke knob. Installs with OEM set screw (Not Included). Fits all Years Yamaha Superjet, FX1 and WaveBlaster Models. Bright Dip Anodized Black.
Part Number: 04-03-351
Learn More -
Blowsion Dash Knob - Kawasaki
Blowsion Billet Dash Knob. Direct replacement for OEM Kawasaki Plastic Knobs. Bright Dip Anodized. 1 Per Package. Fit all Kawasaki 750 Sxi and SXR 800 Models. Sanitize your dash--the finishing touch when also combined with our billet dashboard plates on the 750 Sxi. (NOTE: Not to be used as Star Trek badge Identification.)
Learn More -
Blowsion Billet Exhaust Nozzle - Yamaha Superjet
Blowsion Billet Exhaust Nozzle for all 1996-2020 Yamaha Superjet Models. Updated carefully for 2008 to fit the new narrower Super Jet bottom hull as well as 1996-2007 models. This is one ultra off the hook nozzle. Function and fit are Blowsion perfect. Fits over OEM exhaust flange. Vanity rules on these beauties. Available in all colors!
Learn More -
Blowsion Billet Exhaust Nozzle - Kawasaki SXR
This is one super clean exhaust nozzle to clean up and sanitize the rear of your SXR. Function and fit are Blowsion perfect. Fits over OEM Exhaust Flange. Vanity rules on these beauties. Fits all Kawasaki SXR 800 and SXR 1500 Models. Available in all anodized colors!
Learn More -
Blowsion Billet Fuel Filler Neck - Kawasaki
Blowsion Billet aluminum fuel cap socket filler neck. Fits all years Kawasaki SXR 800, SXR 1500, 750 SX, SXI and SXI Pro, ZXi, and STX models. Works with stock plastic or aftermarket billet gas caps. Available in Black or Clear.
Learn More