Search results for 'Year'
-
Blowsion Billet Strap Hook
NEW! - The Blowsion Billet Strap Hook. Replaces OEM Yamaha style waterbox, battery, and fuel tank strap hooks. Fits ALL years Yamaha Superjet, Rickter Hulls, Lightweight.DE, and many other aftermarket superjet based hull types. The Blowsion Strap Hook incorporates a removable 3mm set screw that retains the strap in place so that it cannot come off. This innovative little feature works perfectly for the hard to reach strap hooks where the straps have a tendency to come off. Price includes one hook, one M6 x 16mm bolt and a M3 x 6mm bolt. Available in Purple, Red, Black, Green, Orange, Blue and Teal Anodized Colors.
Learn More -
Blowsion Pump Shoe - Yamaha 148MM
The Blowsion 148mm Aluminum Pump Shoe was designed for fitting larger 148mm pumps into both Yamaha Superjet and aftermarket hulls. Using our 148mm shoe vs a 144mm (stock Superjet size) will greatly increase hook up and drive when used in conjunction with 148mm pumps. Fits all years Yamaha Superjet, 1993-1996 WaveBlaster 1, Polaris Octane and Rickters. Mounting holes are not drilled or tapped so installation in the different Yamaha design aftermarket hulls can be facilitated.
Part Number: 02-02-434
Learn More -
RRP Billet Motor Mount - Superjet / Rickter
RRP Adjustable Billet Motor Mounts. Been struggling with broken Engine Mounts? Looking for something to take the abuse of today's BIG Air Freestyle/FreeRiding? Then the NEW heavy duty Billet adjustable RRP Engine mounts are your answer. Fits all years Yamaha Superjet (1990-2020) and Rickter Models. Available in Black, Blue, and Red. Sold Individually (1).
Learn More -
WSM Impeller Housing - Yamaha 144MM
WSM Aftermarket Yamaha 144MM Impeller Housing with Replaceable Wear Ring. Fits all Years Yamaha Superjet and WaveBlaster 1. Replacement for the following OEM Part Numbers: 6R7-51312-00-94, 6R7-51312-01-94, 6R7-51312-02-94, 6R7-51312-03-94, 6R7-51312-03-00.
Part Number: 003-507
Learn More -
OEM Yamaha Battery / Waterbox Strap
Genuine OEM Yamaha Battery / Waterbox Strap. Fits all Years Yamaha Superjet and FX1 models.
Part Number: EU0-68218-04-00
Learn More -
OEM Yamaha Fuel Tank Strap (Left Side)
Genuine OEM Yamaha Fuel Tank Strap (Left Side). Fits all Years Yamaha Superjet and FX1.
Part Number: EW2-67821-30-00
Learn More -
OEM Yamaha Fuel Tank Strap (Right Side)
Genuine OEM Yamaha Fuel Tank Strap (Right Side). Fits all Years Yamaha Superjet and FX1.
Part Number: EW2-67821-00-00
Learn More -
Blowsion Billet Handlepole
The Blowsion Billet Adjustable Handle Pole. In development and testing for over two years, this lightweight futuristic design incorporates every feature and request from not only the design group here at Blowsion, but feedback and testing as well from the top pros in racing, freeride and freestyle. This product was the definition of a team effort! Available in every color combo imaginable!
Learn More -
Side Rail Turf Kit - Yamaha SJ / FX1 / KAW 650/750 / Rickter
Blowsion Custom Cut Side Rail Turf Kit. Fits all years Yamaha Superjet, FX1, Polaris Octane, Rickter and Kawasaki 650 and 750 Stand up Models. Improve the traction and looks on the side rails of your ski with our custom fit side rail covering kits. Side Rail Turf Kits Include enough material to cover the front bumper, sides, and rear corners of the side rail. Side rail kits bond directly to the fiberglass. All OEM/Stock plastic will need to be removed prior to application of side rail turf kit. For most applications a Quart of Mat Glue is recommended for installation. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-324
Learn More -
Side Molding 1-3/8" - Black (25FT)
Extended Length. Made out of injection molded flexible urethane. Attaches to your watercraft with its own adhesive backing. Each kit includes special pre-wipe cleaner to promote maximum adhesion and durability. The 1-3/8" Inch size is excellent for most sitdown PWC as well as all years of Kawasaki SXR and Yamaha Super Jet. Length: 25ft
Part Number: 04-02-307
Learn More -
Blowsion Billet Flywheel Cover (Last Model)
Closeout Sale on Last Years Model. Blowsion Billet Flywheel Cover. Fits all OEM Yamaha Superjet 61X and 62T Crankcases. Stainless Steel Hardware and O-Ring Gasket Seal Included. Limited Quantities/Colors available.
Learn More -
Leak Down Block Off Kit Yamaha (62T)
Blowsion Engine Leak Down Block Off Kit. This is an essential tool for determining engine health. Make sure your fresh rebuilt engine is sealed properly, or use it to diagnose engine and/or tuning issues. Utilize your existing leak down tester or plug your Pop-off pressure gauge into the pulse fitting on your cases and check for air leaks. Includes anodized aluminum plates and rubber gaskets to match. All mounting hardware included. Fits all years 62T 701 engines and 62t 760 engines with a b-pipe manifold.
Part Number: 01-03-816
Learn More -
ODI Reflex Grips V2.1 Army Green (135mm)
We are excited to announce the newest addition to the ODI line up of v2.1 Lock-On Grips – the Reflex grip. Drawing on over 40 years of experience of producing performance-driven grips and feedback from our extensive network of top riders across the globe, the Reflex grips have been engineered to reduce impacts and vibration being passed on to the riders’ hands to allow you to ride more with less pain and fatigue. Color: Army Green
Part Number: 03-05-445
Learn More -
ODI Reflex Grips V2.1 Black (135mm)
We are excited to announce the newest addition to the ODI line up of v2.1 Lock-On Grips – the Reflex grip. Drawing on over 40 years of experience of producing performance-driven grips and feedback from our extensive network of top riders across the globe, the Reflex grips have been engineered to reduce impacts and vibration being passed on to the riders’ hands to allow you to ride more with less pain and fatigue. Color: Black
Part Number: 03-05-446
Learn More -
ODI Reflex Grips V2.1 Grey (135mm)
We are excited to announce the newest addition to the ODI line up of v2.1 Lock-On Grips – the Reflex grip. Drawing on over 40 years of experience of producing performance-driven grips and feedback from our extensive network of top riders across the globe, the Reflex grips have been engineered to reduce impacts and vibration being passed on to the riders’ hands to allow you to ride more with less pain and fatigue. Color: Grey
Part Number: 03-05-447
Learn More -
ODI Reflex Grips V2.1 Orange (135mm)
We are excited to announce the newest addition to the ODI line up of v2.1 Lock-On Grips – the Reflex grip. Drawing on over 40 years of experience of producing performance-driven grips and feedback from our extensive network of top riders across the globe, the Reflex grips have been engineered to reduce impacts and vibration being passed on to the riders’ hands to allow you to ride more with less pain and fatigue. Color: Orange
Part Number: 03-05-448
Learn More