Search results for 'Year'
-
Blowsion Hood Seal
Heavy Duty Replacement Hood Seal. Fits all years Yamaha Super Jet, Yamaha FX-1, all years Polaris Octane, Yamaha Wave Blaster and most aftermarket hulls. Dimensions: L 2.7m x W 16mm x H 19mm.
Part Number: 04-04-411
Learn More -
Skat-Trak Set-Back Billet Magnum Pump - Yamaha
The Skat-Trak 14 Vane Two Piece Billet Set-Back Magnum Pump. Available in 148mm, 155mm, 158mm, and 160mm sizes. Includes one Skat-Trak impeller. Fits all years Yamaha Superjet, WaveBlaster and Rickter Models. Skat-Trak Extended Length Driveshaft is required.
-
OEM Ignition Coil - Kawasaki / Yamaha
Fits all years Yamaha Super Jet 650/701/760, and Kawasaki 750/800 Models. The preferred choice for replacement coils in both Yamaha and Kawasaki engines. Great performance at an affordable price.
Part Number: 21121-3713
Learn More -
Solas Yamaha Magnum Pump 148MM
Solas has just introduced the 148mm Magnum 12 Vane Pump Stator Section. Fits all years Yamaha Super Jet and Blaster with use of standard length driveshaft. Constructed of stainless steel and 6061 T-6 billet aluminum, unlike the stock pumps, which are made from weaker cast aluminum, plastic and brass.
Part Number: 02-02-019
Learn More -
Blowsion Billet Strap Hook
NEW! - The Blowsion Billet Strap Hook. Replaces OEM Yamaha style waterbox, battery, and fuel tank strap hooks. Fits ALL years Yamaha Superjet, Rickter Hulls, Lightweight.DE, and many other aftermarket superjet based hull types. The Blowsion Strap Hook incorporates a removable 3mm set screw that retains the strap in place so that it cannot come off. This innovative little feature works perfectly for the hard to reach strap hooks where the straps have a tendency to come off. Price includes one hook, one M6 x 16mm bolt and a M3 x 6mm bolt. Available in Purple, Red, Black, Green, Orange, Blue and Teal Anodized Colors.
Learn More -
Rickter MX1 Hull
After 2 years of R&D with the best sit down freeriders, The Rickter Team is very proud to introduce the all new Rickter MX1 Hull. The Rickter MX-1 Hull is fully inspired by the famous Yamaha WaveBlaster with added stability and amazing handling. Available in Fiberglass, Carbon Look, Carbon TeXtreme Look, Full Carbon Fiber and Full Carbon TeXtreme.
PLEASE EMAIL FOR AVAILABILITY
Learn More -
Blowsion Pump Shoe - Yamaha 148MM
The Blowsion 148mm Aluminum Pump Shoe was designed for fitting larger 148mm pumps into both Yamaha Superjet and aftermarket hulls. Using our 148mm shoe vs a 144mm (stock Superjet size) will greatly increase hook up and drive when used in conjunction with 148mm pumps. Fits all years Yamaha Superjet, 1993-1996 WaveBlaster 1, Polaris Octane and Rickters. Mounting holes are not drilled or tapped so installation in the different Yamaha design aftermarket hulls can be facilitated.
Part Number: 02-02-434
Learn More -
WSM Impeller Housing - Yamaha 144MM
WSM Aftermarket Yamaha 144MM Impeller Housing with Replaceable Wear Ring. Fits all Years Yamaha Superjet and WaveBlaster 1. Replacement for the following OEM Part Numbers: 6R7-51312-00-94, 6R7-51312-01-94, 6R7-51312-02-94, 6R7-51312-03-94, 6R7-51312-03-00.
Part Number: 003-507
Learn More -
Side Molding 1-3/8" - Black (25FT)
Extended Length. Made out of injection molded flexible urethane. Attaches to your watercraft with its own adhesive backing. Each kit includes special pre-wipe cleaner to promote maximum adhesion and durability. The 1-3/8" Inch size is excellent for most sitdown PWC as well as all years of Kawasaki SXR and Yamaha Super Jet. Length: 25ft
Part Number: 04-02-307
Learn More -
Blowsion Billet Flywheel Cover (Last Model)
Closeout Sale on Last Years Model. Blowsion Billet Flywheel Cover. Fits all OEM Yamaha Superjet 61X and 62T Crankcases. Stainless Steel Hardware and O-Ring Gasket Seal Included. Limited Quantities/Colors available.
Learn More -
Leak Down Block Off Kit Yamaha (62T)
Blowsion Engine Leak Down Block Off Kit. This is an essential tool for determining engine health. Make sure your fresh rebuilt engine is sealed properly, or use it to diagnose engine and/or tuning issues. Utilize your existing leak down tester or plug your Pop-off pressure gauge into the pulse fitting on your cases and check for air leaks. Includes anodized aluminum plates and rubber gaskets to match. All mounting hardware included. Fits all years 62T 701 engines and 62t 760 engines with a b-pipe manifold.
Part Number: 01-03-816
Learn More -
ODI Reflex Grips V2.1 Army Green (135mm)
We are excited to announce the newest addition to the ODI line up of v2.1 Lock-On Grips – the Reflex grip. Drawing on over 40 years of experience of producing performance-driven grips and feedback from our extensive network of top riders across the globe, the Reflex grips have been engineered to reduce impacts and vibration being passed on to the riders’ hands to allow you to ride more with less pain and fatigue. Color: Army Green
Part Number: 03-05-445
Learn More -
ODI Reflex Grips V2.1 Black (135mm)
We are excited to announce the newest addition to the ODI line up of v2.1 Lock-On Grips – the Reflex grip. Drawing on over 40 years of experience of producing performance-driven grips and feedback from our extensive network of top riders across the globe, the Reflex grips have been engineered to reduce impacts and vibration being passed on to the riders’ hands to allow you to ride more with less pain and fatigue. Color: Black
Part Number: 03-05-446
Learn More -
ODI Reflex Grips V2.1 Grey (135mm)
We are excited to announce the newest addition to the ODI line up of v2.1 Lock-On Grips – the Reflex grip. Drawing on over 40 years of experience of producing performance-driven grips and feedback from our extensive network of top riders across the globe, the Reflex grips have been engineered to reduce impacts and vibration being passed on to the riders’ hands to allow you to ride more with less pain and fatigue. Color: Grey
Part Number: 03-05-447
Learn More -
ODI Reflex Grips V2.1 Orange (135mm)
We are excited to announce the newest addition to the ODI line up of v2.1 Lock-On Grips – the Reflex grip. Drawing on over 40 years of experience of producing performance-driven grips and feedback from our extensive network of top riders across the globe, the Reflex grips have been engineered to reduce impacts and vibration being passed on to the riders’ hands to allow you to ride more with less pain and fatigue. Color: Orange
Part Number: 03-05-448
Learn More -
ODI Reflex Grips V2.1 Pink (135mm)
We are excited to announce the newest addition to the ODI line up of v2.1 Lock-On Grips – the Reflex grip. Drawing on over 40 years of experience of producing performance-driven grips and feedback from our extensive network of top riders across the globe, the Reflex grips have been engineered to reduce impacts and vibration being passed on to the riders’ hands to allow you to ride more with less pain and fatigue. Color: Pink
Part Number: 03-05-449
Learn More