Search results for 'Year'
-
Blowsion Pump Shoe - Yamaha 144MM
Blowsion Aluminum Pump Shoe for Yamaha 144mm Pumps. Replace that easily broken OEM plastic intake duct with this unbreakable aluminum replacement. Fits all years Yamaha Superjet, 1993-1996 WaveBlaster 1, Polaris Octane and Rickters. Mounting holes are not drilled or tapped so install in the different Yamaha design aftermarket hulls can be facilitated.
Part Number: 02-02-432
Learn More -
Blowsion Battery Box
Replace that cracked and worn out stock plastic battery box with bulletproof Blowsion aluminum. Each box includes all stock location retaining clips for easy exchange. Padded bottom. Direct fit replacement for all years Yamaha Super Jet, FX1 and Polaris Octane. Can be fit as replacement to all Years Kawasaki 750 and SXR 800 with minor battery strap modifications. Color: Anodized Black
Part Number: 01-04-601
Learn More -
Billet Choke Knob - Yamaha
Blowsion Billet Choke Knob. Direct replacement for YAMAHA OEM Plastic choke knob. Installs with OEM set screw (Not Included). Fits all Years Yamaha Superjet, FX1 and WaveBlaster Models. Bright Dip Anodized Black.
Part Number: 04-03-351
Learn More -
Billet Fuel Select - Yamaha
Sanitize the dash of your Yamaha controls with this Blowsion Billet Dash Knob. Replaces the OEM Yamaha plastic ON/OFF/RESERVE Knob. Uses OEM screw to mount. Fits all years Yamaha Superjet, FX1 and WaveBlaster Models. Also Compatible with most Yamaha 2-Stroke Sitdown Models (Wave Jammer, Wave Runner, Wave Raider, VXR). Bright Dip Anodized Black. 1 Per Package.
Part Number: 04-03-352
Learn More -
CAS Billet Aluminum Flange Only
Available for riders wanting to use the end flange only for custom scupper and rear exhaust installations etc. The new billet flange assembly is the premium design setup and allows use of the Blowsion billet exhaust outlet so vain riders can sanitize both sides of the rear of their watercraft. Fits all years Super Jet, KAWI 750 and SXR 800, KAWI 650, and Polaris Octane. Anodized Clear.
Part Number: 06-01-023
Learn More -
Blowsion CAS Billet Aluminum One Way Valve Scupper
Our new CAS (cool as S*%!) flow valve design prevents water getting in during tail stands, wave jumping, or all out buoy shredding. The new billet flange assembly allows use of our billet exhaust outlet so vain riders can sanitize both sides of the rear of their ski. Fits all years Yamaha Superjet, Kawasaki 650, Kawasaki 750, Kawasaki SXR 800, Polaris Octane, Rickter XFS, Rickter XFR, Rickter EVO, Rickter Edge and Most Aftermarket Hulls.
Part Number: 06-01-022
Learn More -
Destroyer Sponsons - Superjet 2008+ / FX-1
Trying to improve on an already amazing product? The new Tubbie Destroyer sponson design is simply the Ferrari of the Blowsion original Tubbie Freeride sponsons. Built and shaped specific to the unique hull shape of the 2008 and Newer Yamaha SuperJet and FX1. Available in White or Black.
Learn More -
Engine Block Off Plates Yamaha (62T)
Engine Block Off Plates 62T. A great way to block off access to your internal motor and all its complex innards. No more red rags or cheesy paper towels to suck through your initial engine fire off and carpet the cases with! Cool way for storing and displaying motors. Carbon Black Anodized and includes all mounting hardware. Fits all years 62T 701cc Yamaha two cylinder motors.
Part Number: 01-03-813
Learn More -
Blowsion Billet Hood Latch
Replace your rear factory hood latch with a billet aluminum BLOWSION latch and ride worry free. Recently updated and re-machined to also fit the Kawasaki SXR 800 and SXR 1500. Also fits all years Yamaha FX1 and all years Yamaha Super Jet. A must for surf and big wave riders, especially those running a BLOWSION pole limiting rope. Requires the stock base locking hardware. Now available in more colors- Anodized Green, Red, Blue, Orange, Clear, Purple and Black!
Learn More -
Jet Dynamics Pump Shoe 155MM
Jet Dynamics 155mm over-sized aluminum replacement intake duct. Fits all years Yamaha Superjet, 1993-1996 WaveBlaster 1, Rickter and many other popular Yamaha based aftermarket hulls. *Intended for Use with Larger 155mm Yamaha Pumps.
Part Number: 02-05-432
Learn More -
MSD Improved Stock Coil
More juice for your powerplant than any OEM coil can provide. New Updated model! Fits all years Yamaha Superjet 650/701/760, and Kawasaki 750 and 800 SXR.
Part Number: 01-05-012
Learn More -
PowerFactor Exhaust Kit
Not for the faint of heart (or wallet!), The PowerFactor Dry Exhaust system has been used by the top freestyle riders for the last 7 years, and has won 6 world championships. Learn More -
Pump Cone - Yamaha Superjet
Designed with the freestyler in mind, the freestyle pump cone allows the engine to rev faster for the big tricks. Fits all years Yamaha Superjet.
Part Number: 02-02-406
Learn More -
Solas Yamaha Magnum Pump 144MM
SOLAS Yamaha 12 Vane 144mm Stainless Magnum Pump. Fits all years Yamaha Superjet and WaveBlaster with standard length driveshaft. Pump Bearings and Seals Not Included.
Part Number: 02-02-020
Learn More -
Throttle Adapter - Yamaha (6mm)
6mm Throttle Cable Adapter. A Throttle Cable Adapter is required to run most aftermarket throttle levers. Fits All Years Yamaha Two Stroke and 2021+ Yamaha Superjet PWC Models. Please see list below for model compatibility.
Part Number: 03-05-242
Learn More -
WORX Intake Grate - WR205 - Yamaha Superjet / Blaster
This is a similar grate to the WR201 however it is less aggressive and gives 1-2 MPH higher top speed but does not have the same braking effect as the WR201. If you want top speed and usually ride in calmer/smoother water this is the one for you. Perfectly matched to enable easy installation. Fits all years 1990-2017 Yamaha Superjet and WaveBlaster 1, 2.
Part Number: WR205
Learn More