Search results for 'Year'
-
Blowsion Pump Shoe - Yamaha 144MM
Blowsion Aluminum Pump Shoe for Yamaha 144mm Pumps. Replace that easily broken OEM plastic intake duct with this unbreakable aluminum replacement. Fits all years Yamaha Superjet, 1993-1996 WaveBlaster 1, Polaris Octane and Rickters. Mounting holes are not drilled or tapped so install in the different Yamaha design aftermarket hulls can be facilitated.
Part Number: 02-02-432
Learn More -
Blowsion Battery Box
Replace that cracked and worn out stock plastic battery box with bulletproof Blowsion aluminum. Each box includes all stock location retaining clips for easy exchange. Padded bottom. Direct fit replacement for all years Yamaha Super Jet, FX1 and Polaris Octane. Can be fit as replacement to all Years Kawasaki 750 and SXR 800 with minor battery strap modifications. Color: Anodized Black
Part Number: 01-04-601
Learn More -
Billet Choke Knob - Yamaha
Blowsion Billet Choke Knob. Direct replacement for YAMAHA OEM Plastic choke knob. Installs with OEM set screw (Not Included). Fits all Years Yamaha Superjet, FX1 and WaveBlaster Models. Bright Dip Anodized Black.
Part Number: 04-03-351
Learn More -
Billet Fuel Select - Yamaha
Sanitize the dash of your Yamaha controls with this Blowsion Billet Dash Knob. Replaces the OEM Yamaha plastic ON/OFF/RESERVE Knob. Uses OEM screw to mount. Fits all years Yamaha Superjet, FX1 and WaveBlaster Models. Also Compatible with most Yamaha 2-Stroke Sitdown Models (Wave Jammer, Wave Runner, Wave Raider, VXR). Bright Dip Anodized Black. 1 Per Package.
Part Number: 04-03-352
Learn More -
CAS Billet Aluminum Flange Only
Available for riders wanting to use the end flange only for custom scupper and rear exhaust installations etc. The new billet flange assembly is the premium design setup and allows use of the Blowsion billet exhaust outlet so vain riders can sanitize both sides of the rear of their watercraft. Fits all years Super Jet, KAWI 750 and SXR 800, KAWI 650, and Polaris Octane. Anodized Clear.
Part Number: 06-01-023
Learn More -
Blowsion CAS Billet Aluminum One Way Valve Scupper
Our new CAS (cool as S*%!) flow valve design prevents water getting in during tail stands, wave jumping, or all out buoy shredding. The new billet flange assembly allows use of our billet exhaust outlet so vain riders can sanitize both sides of the rear of their ski. Fits all years Yamaha Superjet, Kawasaki 650, Kawasaki 750, Kawasaki SXR 800, Polaris Octane, Rickter XFS, Rickter XFR, Rickter EVO, Rickter Edge and Most Aftermarket Hulls.
Part Number: 06-01-022
Learn More -
Blowsion Billet Hood Latch
Replace your rear factory hood latch with a billet aluminum BLOWSION latch and ride worry free. Recently updated and re-machined to also fit the Kawasaki SXR 800 and SXR 1500. Also fits all years Yamaha FX1 and all years Yamaha Super Jet. A must for surf and big wave riders, especially those running a BLOWSION pole limiting rope. Requires the stock base locking hardware. Now available in more colors- Anodized Green, Red, Blue, Orange, Clear, Purple and Black!
Learn More -
Pump Cone - Yamaha Superjet
Designed with the freestyler in mind, the freestyle pump cone allows the engine to rev faster for the big tricks. Fits all years Yamaha Superjet.
Part Number: 02-02-406
Learn More -
Throttle Adapter - Yamaha (6mm)
6mm Throttle Cable Adapter. A Throttle Cable Adapter is required to run most aftermarket throttle levers. Fits All Years Yamaha Two Stroke and 2021+ Yamaha Superjet PWC Models. Please see list below for model compatibility.
Part Number: 03-05-242
Learn More -
Blowsion Hood Seal
Heavy Duty Replacement Hood Seal. Fits all years Yamaha Super Jet, Yamaha FX-1, all years Polaris Octane, Yamaha Wave Blaster and most aftermarket hulls. Dimensions: L 2.7m x W 16mm x H 19mm.
Part Number: 04-04-411
Learn More -
Side Molding 1-3/8" - Black
Made out of injection molded flexible urethane. Attaches to your watercraft with its own adhesive backing. Each kit includes special pre-wipe cleaner to promote maximum adhesion and durability. The 1-3/8" Inch size is excellent for most sitdown PWC as well as all years of Kawasaki SXR and Yamaha Super Jet.
Part Number: 04-02-300
Learn More -
Side Molding 1" - Black
Made out of injection molded flexible urethane. Attaches to your watercraft with its own adhesive backing. Each kit includes special pre-wipe cleaner to promote maximum adhesion and durability. The 1" size is perfect for all years Kawasaki 750SX, SXi, SXi-Pro and All years Yamaha Superjet.
Part Number: 04-02-302
Learn More -
Side Molding 1" - Chrome
Made out of injection molded flexible urethane. Attaches to your watercraft with its own adhesive backing. Each kit includes special pre-wipe cleaner to promote maximum adhesion and durability. The 1" inch size is perfect for all years KAWI SXi/SXi Pro and all years Super Jet.
Part Number: 04-02-303
Learn More -
Mat Kit - Stitched - Digger Footwells - Yamaha Superjet (1990-1995)
Glue On! Includes bottom, sides, dash and undermat foam. Fits all years 1990-1995 Yamaha Superjet Models with Digger Composite Footwells. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-069
Learn More -
Mat Kit - Stitched - Kicker Footwells - Yamaha Superjet (1990-1995)
Glue On! Includes bottom, sides, dash and undermat foam. Fits all years 1990-1995 Yamaha Superjet Models with Kicker Composite Footwells. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-070
Learn More -
Mat Kit - Stitched - Freestyle Lifters - Yamaha Superjet (1990-1995)
Glue On! Includes bottom, sides, dash and undermat foam. Fits all years 1990-1995 Yamaha Superjet Models. Requires Contact Cement/Blowsion Mat Glue for installation. Not available with 3M Self-Adhesive.
Part Number: 04-02-071
Learn More