Search results for 'Jet'

3M Marine Grade Silicone creates a rubbery waterproof seal that remains flexible and is mildew resistant. For sealing Lexan™, Plexiglass™, gelcoat, fiberglass, wood, glass, metal, rubber, and vinyl. Cured sealant remains flexible.

Part Number: 08029

If you are looking for a bedding compound with exceptionally strong adhesion, and are not concerned about later removal of hardware, 3M Fast Cure 5200 should be at the top of your list. Along with outstanding adhesion, 3M Fast Cure 5200 remains flexible after it cures and it can be used above or below the waterline. Ideal for underwater thru-hull fittings, hull-to-deck joints, portholes and bonding wood to fiberglass.

Part Number: 06520

Replacement RRP Standard Footwell Bindings Only. Includes Left and Right Side Foot hold. No Hardware or Mounting Brackets are Included.

Part Number: 05-03-024

Blowsion Carbon composite tank holder keeps the tank from sliding around in the bottom of a hull during freestyle maneuvers. Available for Small Fuel Tank and OEM/ColdFusion Yamaha Fuel Tanks.

This is the FINAL answer for keeping your stitched and Hydro Turf mat kit edges stuck down. Use to seam edges permanently. Once dry it creates seamless perfection.

Part Number: 06-03-151

RRP Adjustable Footwell Binding System. Universal fit. Installation labor not included!

Part Number: 05-03-020

RRP Adjustable Ninja Footwell Binding System for Yamaha Superjet. Universal fit. Installation labor not included!

Part Number: 05-03-021

Blowsion Mat Kit Glue "Blow Goo" to the rescue. Use this solvent-based contact adhesive with your Hydro Turf or stitched mat kit and never worry again about your mats coming loose. Not water-based!

Part Number: 06-03-142

Blowsion Mat Kit Glue "Blow Goo" to the rescue. Use this solvent-based contact adhesive with your Hydro Turf or stitched mat kit and never worry again about your mats coming loose. Not water-based!

Part Number: 06-03-141

The key to installing Tubbie Sponsons, Railcaps and other composite accessories on your watercraft. Easy-to-use tube fits a standard caulking gun. Fast-set formula dries tack-free in 90 minutes and delivers extremely tough bonds. Color: White.

Part Number: 06-03-135

The key to installing Tubbie Sponsons, Railcaps and other composite accessories on your watercraft. Easy-to-use tube fits a standard caulking gun. Fast-set formula dries tack-free in 90 minutes and delivers extremely tough bonds. Color: Black.

Part Number: 06-03-136

Each kit includes all materials needed for mixing into, and handling, your installation resin (available separately). Silica Thickener, Mixing Cups, Brushes, Gloves and Knitted fabric cloth for all seams.

Part Number: 06-03-113

Why buy a bunch of confusing fiberglass materials to reinforce your ski when we can provide you with just the right amount. Pre cut tri-axial panels to reinforce both sides of your ski.

Part Number: 05-05-011

Why buy a bunch of confusing fiberglass materials to reinforce your ski when we can provide you with just the right amount. Pre cut tri-axial panels to reinforce both sides of your ski.

Part Number: 05-05-012

Direct water and air to where you want it in the engine compartment! Drop Tube and Urethane Flange for Hood Baffle Air Intakes. Use with either aftermarket hoods or stock factory hood to increase air flow. Each kit includes three oversize lengths of hose tubing and urethane flanges. Bond-able to hand laid fiberglass, carbon, SMC or ABS inner liners these are simple to install and are an excellent answer for air-starved motors. An EXCELLENT choice for the Kawasaki SXR 800 with the Factory Pipe installed!

Part Number: 05-02-199