Search results for 'ODI'
-
Bilge Fitting 45-Degree
Blowsion 45-Degree machined aluminum bilge fittings are a clean replacement of the bulky plastic fittings usually supplied with aftermarket bilge pump kits. Available in Anodized Black or Clear.
Learn More -
Bilge Fitting Straight
Blowsion machined aluminum straight bilge fittings are a clean replacement of the bulky plastic fittings usually supplied with aftermarket bilge pump kits. Available in Clear, Black, Green, Red, Blue & Orange anodized colors.
Learn More -
Bilge Pump Dual Mount - Kawasaki
Dual bilge pump mounting bracket for Kawasaki Sxi Pro and KAWASAKI SXR 800. The bracket locates the pumps within millimeters from the base of the KAWI hull. Easy built in installation, no messy adhesives. Material: Aluminum. Color: Anodized Black.
Part Number: 06-01-101
Learn More -
Bilge Pump Dual Mount - Superjet
Blowsion Dual Bilge Pump Mounting Bracket. The bracket locates the pump within millimeters from the base of the Super Jet hull. Easy built in installation, no messy adhesives. Fits 1994 and up Yamaha Superjet Models. All hardware included. Material: Aluminum. Color: Anodized Black.
Part Number: 06-01-153
Learn More -
Bilge Pump Single Mount - Kawasaki
Single bilge pump mounting bracket for Kawasaki Sxi Pro and KAWASAKI SXR 800. Single pump mounting bracket for Kawasaki Sxi Pro and KAWASAKI SXR 800. The bracket locates the pump within millimeters from the base of the KAWI hull. Easy built in installation, no messy adhesives. Material: Aluminum. Color: Anodized Black.
Part Number: 06-01-102
Learn More -
Bilge Pump Single Mount - Superjet
Single bilge pump mounting bracket for all 1994 and newer Yamaha SuperJet Models. The bracket locates the bilge pump within millimeters from the base of the Super Jet hull. Easy built in installation, no messy adhesives. All hardware included. Material: Aluminum. Color: Anodized Black.
Part Number: 06-01-152
Learn More -
Bilge Switch - Handlebar Mount - Universal
Universal Handle Bar Mount Bilge Switch. Fits any watercraft handle bars on the market. Anodized Black.
Part Number: 06-01-212
Learn More -
Billet Choke Knob - Yamaha
Blowsion Billet Choke Knob. Direct replacement for YAMAHA OEM Plastic choke knob. Installs with OEM set screw (Not Included). Fits all Years Yamaha Superjet, FX1 and WaveBlaster Models. Bright Dip Anodized Black.
Part Number: 04-03-351
Learn More -
Blowsion Dash Knob - Kawasaki
Blowsion Billet Dash Knob. Direct replacement for OEM Kawasaki Plastic Knobs. Bright Dip Anodized. 1 Per Package. Fit all Kawasaki 750 Sxi and SXR 800 Models. Sanitize your dash--the finishing touch when also combined with our billet dashboard plates on the 750 Sxi. (NOTE: Not to be used as Star Trek badge Identification.)
Learn More -
Blowsion Billet Exhaust Nozzle - Kawasaki SXR
This is one super clean exhaust nozzle to clean up and sanitize the rear of your SXR. Function and fit are Blowsion perfect. Fits over OEM Exhaust Flange. Vanity rules on these beauties. Fits all Kawasaki SXR 800 and SXR 1500 Models. Available in all anodized colors!
Learn More -
Blowsion Billet Fuel Cap - Yamaha
Blowsion Low Pro Billet aluminum fuel caps for all Yamaha watercraft. Low profile smooth design allows for outside fueling, yet will not get in the way during aerial or freestyle moves around the front of the watercraft. Available in all anodized colors!
Learn More -
Billet Fuel Select - Yamaha
Sanitize the dash of your Yamaha controls with this Blowsion Billet Dash Knob. Replaces the OEM Yamaha plastic ON/OFF/RESERVE Knob. Uses OEM screw to mount. Fits all years Yamaha Superjet, FX1 and WaveBlaster Models. Also Compatible with most Yamaha 2-Stroke Sitdown Models (Wave Jammer, Wave Runner, Wave Raider, VXR). Bright Dip Anodized Black. 1 Per Package.
Part Number: 04-03-352
Learn More -
CAS Billet Aluminum Flange Only
Available for riders wanting to use the end flange only for custom scupper and rear exhaust installations etc. The new billet flange assembly is the premium design setup and allows use of the Blowsion billet exhaust outlet so vain riders can sanitize both sides of the rear of their watercraft. Fits all years Super Jet, KAWI 750 and SXR 800, KAWI 650, and Polaris Octane. Anodized Clear.
Part Number: 06-01-023
Learn More -
Blowsion Billet Hood Bumper - Kawasaki SXR/750
Blowsion Direct Billet Replacement for OEM Kawsaki SXR and 750SX, SXI, & SXi-Pro hood bumpers. Anodized Black.
Learn More -
Blowsion Hood Hooks - SXR
Utilizing our many years of Super Jet Freestyle and surf quality hood hook design experience, these bulletproof SXR billet hood hooks allow for the ultimate abuse of your 2003 and newer Kawasaki SXR 800 and SXR 1500 on the race course, river or in big surf. Do not risk losing your hood -- no more tweaked or broken OEM clips bending or breaking and causing serious engine and wallet damage. Includes Stainless Steel Mounting Hardware. Color: Anodized Black.
Part Number: 04-04-101
Learn More -
Blowsion Billet Hood Latch
Replace your rear factory hood latch with a billet aluminum BLOWSION latch and ride worry free. Recently updated and re-machined to also fit the Kawasaki SXR 800 and SXR 1500. Also fits all years Yamaha FX1 and all years Yamaha Super Jet. A must for surf and big wave riders, especially those running a BLOWSION pole limiting rope. Requires the stock base locking hardware. Now available in more colors- Anodized Green, Red, Blue, Orange, Clear, Purple and Black!
Learn More