Search results for 'billet'

ADA Racing Cylinder Head Girdle kit for the new ADA V2 Kawasaki SXR 800 Billet Girdled Head. This girdle kit uses offset base nuts and requires grinding the outside of the cylinder to clearance the girdle studs.

Part Number: KA800G2

ADA Racing Billet Head Shell for the Yamaha 701/760. All ADA Racing billet heads are made from 6061-T6 aluminum and CNC machined in-house for consistency and performance. The head shell is then anodized for durability and protection against salt-water corrosion. This is the head shell only and includes orings that fit into the grooves in the head shell and brass fittings. Available in Black or Silver.

All ADA Racing billet heads are made from 6061-T6 aluminum and CNC machined in-house for consistency and performance. The head shell is then anodized for durability protection against salt-water corrosion. This is the head shell only and includes o-rings that fit into the grooves in the head shell and brass fittings.

ADA Racing V2 Billet Cylinder Head for the Kawasaki 800 SXR engine. All ADA Racing billet heads are made from 6061-T6 aluminum and CNC machined at ADA for consistency and performance. The head shell is then anodized for durability protection against salt-water corrosion. This is the head shell only and includes o-rings that fit into the grooves in the head shell and brass fittings. This is the version 2 head that requires grinding the cylinder for girdle stud clearance. V2 Girdle kit and domes are NOT included.

Billet Girdled Cylinder Head for the Kawasaki 750 and 800. CNC machined at ADA Racing from 6061-T6 aluminum. Anodized for protection against corrosion. This is the head shell only and includes o-rings that fit into the grooves in the head shell and brass fittings.

Billet Cylinder Head for the Kawasaki 750 and SXR 800. All ADA Racing billet heads are made from 6061-T6 aluminum and CNC machined for consistency and performance. Anodized for durability and protection against salt-water corrosion. This is the head shell only. Includes orings that fit into the grooves in the head shell and brass fittings.

ADA Racing billet dome for the Yamaha 760 and 1200 engines, includes compression(OR043) and dome top(OR020) orings. Squish relief is .015 inch @ 86mm with a 10.5 degree angle.

Replacement O-Ring Gasket Seal for all versions of the Blowsion Billet Flywheel Cover.

Part Number: 01-03-359

Check out that mat kit! This 2022 Rickter Edge has a one of a kind GatorStep mat kit in a beautiful brushed grey and teal to match the vibrant custom graphics kit. Teal Blowsion Billet pieces complete the look on this ready-to-rip ski. With a 1000cc Dasa Powervalve engine and a SOLAS Yamaha Magnum Pump 148MM, this ski performs and handles awesome on flat water or surf. Available for immediate shipment, this ski is currently in our Blowsion Showroom.

Part Number: 10-01-072

Brand new Rickter Edge Built for the IJSBA World Finals event in Lake Havasu, this ski got all the attention on vendor row! With custom Blowsion graphics, paired with a one of a kind Jettrim STAR mat kit, this ski is sure to turn heads wherever it goes. Not only does it look great, but it has plenty of power with the 1100cc Dasa Powervalve engine. Of course, no ski would be a Blowsion ski without our signature Blowsion Billet Handlepole. This ski is currently in our Blowsion Showroom and ready to ship immediately.

Part Number: 10-01-071

Genuine OEM Kawasaki Fuel Cap Gasket. Fits Kawasaki All Models Years 300 440 550 650 750 800 900 1100 STX-12F STX-15F SX-R 1500. Fits OEM Kawasaki and Blowsion Kawasaki Billet Fuel Caps.

Part Number: 11009-3020

The Solas KGX-PM-148/74T 12-Vane Stainless Steel Jet Pump is a direct bolt-on performance upgrade. The one-piece, investment cast stainless steel pump offers increased bottom-end acceleration, improved hook-up, and up to 2mph top speed gain over the OEM pump. Oversized bearing housing supports and includes 3 high-quality sealed bearings, seals, shaft and billet aluminum pump cone. Complete Kit includes reduction nozzle and return assisted trim/steering nozzle along with interchangeable nozzle rings for fine tuning.

Part Number: 02-02-025

ADA Racing 3 degree angled reed spacer kit for the Kawasaki 900 and 1100 engines. Includes billet aluminum spacers, gaskets, and studs. All 3 spacers now include a pulse fitting. The studs that are included are for the stock intake manifold. If you are using an aftermarket intake, you may need to use longer studs if the manifold is thicker that stock.

Part Number: 31-131390

Kawasaki 650/750 billet driveline couplers. Machined from 6061- T6 aluminum for superior strength and durability. Utilizes a OEM Kawasaki style damper which is not only smaller in diameter but also stronger and helps reduce heat buildup in the driveline. Machined in hex on backside. These are sold as a set. Includes 1 coupler w/18mm threads and 1 w/20mm threads. Clear anodized for protection against salt water corrosion.

Part Number: 02-02-203

Blowsion Billet Aluminum Handlepole Center Extrusion. Fits the Blowsion Billet Handlepole. Available in 26 inch or 29 inch Lengths.