Products

Thrust Innovations replacement Pump Shoe Seal for Yamaha 155mm Pumps. A Direct Replacement for the discontinued OEM Yamaha 155mm Pump Shoe Seal (OEM Yamaha PN# 64Y-51117-00-00).

Part Number: TI-155-PMP-SL

Aftermarket Keihin Carburetor Rebuild Kit for 38mm, 40mm, 42mm and 44mm CDK-II Carburetors. Fits wide range of 38-44mm Keihin™ CDK-II carbs found on PWC. Includes Viton™ tipped inlet needle.

Part Number: 01-02-492

The GET C1 Engine Hour Meter keeps track of your engine's service life. The meter fits to any bike in minutes without any wiring needed and detects the engine by identifying wave frequencies that flow through the surface it sits on.

Part Number: 06-04-092

Salt Terminator dissolves salt and leaves a protective sheen, guarding against future salt corrosion. Quart Kit comes with hose adapter.

Part Number: 06-03-103

The coolest tool out to remove fuel without burping gas for a month. Extended length of hose reaches all angles and fuel tanks.

Part Number: 06-04-089

If you are looking for a bedding compound with exceptionally strong adhesion, and are not concerned about later removal of hardware, 3M Fast Cure 5200 should be at the top of your list. Along with outstanding adhesion, 3M Fast Cure 5200 remains flexible after it cures and it can be used above or below the waterline. Ideal for underwater thru-hull fittings, hull-to-deck joints, portholes and bonding wood to fiberglass.

Part Number: 06520

3M Marine Grade Silicone creates a rubbery waterproof seal that remains flexible and is mildew resistant. For sealing Lexan™, Plexiglass™, gelcoat, fiberglass, wood, glass, metal, rubber, and vinyl. Cured sealant remains flexible.

Part Number: 08029

Replacement Pivot Bolt Bushings for aftermarket AC Racing aluminum handlepoles. Fits all AC Racing Handlepole Models.

Part Number: 03-04-106

Yamaha Billet Driveline Couplers. Updated design for 2018! These are now lighter and have built-in hex for easy installation with an adjustable wrench. Fits all Yamaha Superjet and WaveBlaster Models except for 1991 and some 1992 Yamaha 650 SJ's. Machined from 6061-T6 aluminum for superior strength and durability. Made in USA! Color: Anodized Clear

Part Number: 02-02-251

ADA Racing V2 Billet Cylinder Head for the Kawasaki 800 SXR engine. All ADA Racing billet heads are made from 6061-T6 aluminum and CNC machined at ADA for consistency and performance. The head shell is then anodized for durability protection against salt-water corrosion. This is the head shell only and includes o-rings that fit into the grooves in the head shell and brass fittings. This is the version 2 head that requires grinding the cylinder for girdle stud clearance. V2 Girdle kit and domes are NOT included.

ADA Racing Billet Cylinder Head for Kawasaki 650 engines. All ADA Racing billet heads are made from 6061-T6 aluminum and CNC machined for consistency and performance. Anodized for durability and protection against salt-water corrosion. This is the head shell only. Includes orings that fit into the grooves in the head shell and brass fittings. You will need to order domes below under Related Products. When ordering domes, you must order a quantity of 2, as domes are sold individually.

ADA Racing Cylinder Head Girdle Kit for Yamaha 701/760 and Yamaha 1100/1200 Girdled Cylinder heads. Includes 6 stainless studs, 6 stainless washers, and 6 chrome acorn nuts. The only true girdle system. It does not bolt the cylinder to the cases, but sandwiches the cylinder between the head and the cases. Therefore, there is no pressure on the base of the cylinder. The threads are rolled for strength and not cut. Thread rolling compresses the material adding strength to the threads. Cutting threads leaves the root of the thread sharp, weakening the thread and making them easier to break.

Part Number: YA701G6

ADA Racing Billet aluminum drive coupler with 18mm threads. Uses stock Kawasaki 650/750 rubber damper. Clear anodized for protection against salt water corrosion. Made in the USA! Also used on the Kawasaki 550SX driveshaft.

Part Number: 31-700199

ADA Racing billet dome for the Yamaha 701 and 1100 engines, includes compression(OR043) and dome top(OR020) orings. Squish relief is .015 inch @ 83mm with a 10.5 degree angle.

Billet Cylinder Head for the Kawasaki 750 and SXR 800. All ADA Racing billet heads are made from 6061-T6 aluminum and CNC machined for consistency and performance. Anodized for durability and protection against salt-water corrosion. This is the head shell only. Includes orings that fit into the grooves in the head shell and brass fittings.