Tools
-
Vertex Mikuni Check Valve Install Tool
Vertex Mikuni SBN Check Valve Installation Tool. Used for installing check valve grommets on most Mikuni Super BN Carburetors and fuel pumps.
Part Number: 451470
Learn More -
Two-Stroke Technology Manual
Two-Stroke Tech Manual. This is an excellent book that will help you understand the complex functions of all two-stroke motors.
Part Number: 06-02-005
Learn More -
Tie Down Pin
Tie Down Pin is designed for all PWC with front or rear bow eyes. A simple way to tie down your PWC, tow a water toy (or skier), another boat, even to help winching in the PWC or attach a docking line!
Part Number: 06-06-103
Learn More -
Super Siphon
The coolest tool out to remove fuel without burping gas for a month. Extended length of hose reaches all angles and fuel tanks.
Part Number: 06-04-089
Learn More -
Super Glue - Rubber Toughened 1oz - Clear
This is the answer for keeping your Hydro Turf or rubber based mat kit edges stuck down. Use to seam edges permanently. Also the best formula we have found for bar grips.
Part Number: 06-03-154
Learn More -
Super Glue - Rubber Toughened 1oz - Black
This is the answer for keeping your Hydro Turf or rubber based mat kit edges stuck down. Use to seam edges permanently. Also the best formula we have found for bar grips.
Part Number: 06-03-156
Learn More -
Super Glue - Extra Thick 2oz
This is the FINAL answer for keeping your stitched and Hydro Turf mat kit edges stuck down. Use to seam edges permanently. Once dry it creates seamless perfection.
Part Number: 06-03-152
Learn More -
Super Glue - Extra Thick 1oz
This is the FINAL answer for keeping your stitched and Hydro Turf mat kit edges stuck down. Use to seam edges permanently. Once dry it creates seamless perfection.
Part Number: 06-03-151
Learn More -
Super Glue - Accelerator 2oz
In a hurry to get on the water after gluing up your mat edges ? This is the answer. Apply your super glue- spray a shot of accelerator, CURED ! - no waiting or holding in place. GO RIDE!
Part Number: 06-03-161
Learn More -
Solas Impeller Tool - Yamaha
A must have for removing a Solas impeller. Fits all Yamaha Solas Impellers.
Part Number: 06-04-020
Learn More -
Skat-Trak Impeller Tool - Yamaha (25mm)
Skat-Trak Impeller Spline Tool Yamaha 25mm. Fits New style Skat-Trak impellers with splined front nose. Will not work on old style Skat-Trak impellers requiring a hex tool.
Part Number: RWRYAMSPSHO
Learn More -
Salt Terminator - Quart Kit with Mixer
Salt Terminator dissolves salt and leaves a protective sheen, guarding against future salt corrosion. Quart Kit comes with hose adapter.
Part Number: 06-03-103
Learn More -
Salt Off - Quart Kit with Mixer
A salt dissolving solution for rinsing your watercraft. Quart Kit comes with hose adapter.
Part Number: 06-03-101
Learn More -
Salt Off - Gallon Refill
A specially formulated salt dissolving solution for rinsing your watercraft engine, interior hull, and exterior parts of your PWC. Mandatory for salt water riders.
Part Number: 06-03-102
Learn More -
Ratio Rite - Oil/Fuel Mixing Cup
Ratio Rite provides a simple and convenient tool to get exact measurements of chemicals and lubricants.
Part Number: 06-03-090
Learn More -
Oil / Fluid Extractor (6 Liter)
Oil / Fluid Extractor (6 Liter). This compact and easy to use oil/fluid extractor makes changing the oil on your 4-stroke model clean and hassle free. Sturdy portable container holds up to 6 liters (1.57 Gallons). Carry handle makes for easy transfer to recycling tank. Pump included.
Part Number: 06-04-088
Learn More