Accessories
-
Impeller Shaft Tool - Yamaha GP1800
22mm x 20 Tooth Splined Prop Tool and Outboard Drive Shaft Holding Tool. This tool fits on the end of the driveshaft and holds the shaft from spinning when removing or installing impellers. Fits Most WaveRunner GP1800, SHO HO, FZR, FZS Series PWC with 1800cc 4 Stroke - 4 Cylinder Engines.
Part Number: 06-04-019
Learn More -
Impeller Shaft Tool - Yamaha
This tool fits on the end of the driveshaft and holds the shaft from spinning when removing or installing impellers. Fits all Yamaha 650, 701, 760.
Part Number: 06-04-022
Learn More -
Impeller Shaft Tool - Kawasaki / Superjet 2021+
Kawasaki Impeller Shaft Tool. Holds spline of Impeller Shaft for removal of impeller. Fits all 1992 and newer Kawasaki models and 2021+ Yamaha Superjet.
Part Number: 06-04-021
Learn More -
MSD Mini Stripper / Crimper
MSD Mini Stripper Spark Plug Wire 8.5mm. Designed to be used in a vise and with a single-edge razor blade to strip spark plug wires without damaging the core and to crimp a terminal.
Part Number: 01-04-422
Learn More -
Super Glue - Rubber Toughened 1oz - Black
This is the answer for keeping your Hydro Turf or rubber based mat kit edges stuck down. Use to seam edges permanently. Also the best formula we have found for bar grips.
Part Number: 06-03-156
Learn More -
Solas Impeller Tool - Yamaha
A must have for removing a Solas impeller. Fits all Yamaha Solas Impellers.
Part Number: 06-04-020
Learn More -
Epoxy Welder (2 Part)
Epoxy (2 Part) Welder. This is THE glue for all your PWC needs. Bonds to SMC, Gel Coat, fiberglass, aluminum etc. Creme color- can be tinted. This Methacrylic epoxy is your toolbox's best friend!
Part Number: 06-03-121
Learn More -
Super Glue - Extra Thick 1oz
This is the FINAL answer for keeping your stitched and Hydro Turf mat kit edges stuck down. Use to seam edges permanently. Once dry it creates seamless perfection.
Part Number: 06-03-151
Learn More -
Vertex Mikuni Check Valve Install Tool
Vertex Mikuni SBN Check Valve Installation Tool. Used for installing check valve grommets on most Mikuni Super BN Carburetors and fuel pumps.
Part Number: 451470
Learn More -
Skat-Trak Impeller Tool - Yamaha (25mm)
Skat-Trak Impeller Spline Tool Yamaha 25mm. Fits New style Skat-Trak impellers with splined front nose. Will not work on old style Skat-Trak impellers requiring a hex tool.
Part Number: RWRYAMSPSHO
Learn More -
BMS Impeller Shaft Tool - Kawasaki SXR 1500
Broward Motorsports Prop Removal Tool for the Kawasaki SXR 1500. Tired of damaging your pump shaft every time you put it in a vice to remove your prop? Those days are over! Broward Motorsports has designed the most advanced tool for holding your impeller shaft in a vice while breaking that hard to remove impeller!
Part Number: BM41-60-8
Learn More -
MSD Spark Guard Dielectric Grease
MSD's Spark Guard is a dielectric grease that solves many common ignition troubles. It stops voltage leaks, eases boot removal, prevents moisture buildup inside the spark plug wire boots, and even helps protect against radio noise (EMI). It also simplifies the installation of MSD Universal Spark Plug Wire Sets. Spark Guard will not dry up or harden so it will retain its spark isolating capabilities indefinitely.
Part Number: 01-04-413
Learn More -
Yamaha Flywheel Puller
Yamaha Flywheel Puller Tool. Fits all two stroke engines (except Kawasaki 900, 1100 and 1200). 12 Hole Disc 8mm Bolts used to remove flywheel unit from the crankshaft
Part Number: 06-04-025
Learn More -
Two-Stroke Technology Manual
Two-Stroke Tech Manual. This is an excellent book that will help you understand the complex functions of all two-stroke motors.
Part Number: 06-02-005
Learn More -
Trailer Bow Stop - Rubber
Non-marring, shock-absorbent polyurethane bowstop fits Super Jet, Waverunner III, and similar PWCs. Bow Pin with Lanyard & Clip not included.
Part Number: 06-06-141
Learn More