Pump & Handling
-
BMS Impeller Shaft Tool - Kawasaki SXR 1500
Broward Motorsports Prop Removal Tool for the Kawasaki SXR 1500. Tired of damaging your pump shaft every time you put it in a vice to remove your prop? Those days are over! Broward Motorsports has designed the most advanced tool for holding your impeller shaft in a vice while breaking that hard to remove impeller!
Part Number: BM41-60-8
Learn More -
Impros Hooker Impeller - Kawasaki SXR 1500 148MM
The Impros Kawasaki Hooker impeller for the SXR 1500 Stand up JetSki is a stainless-steel radial edge design that hooks up and produces excellent performance in all ranges of the powerband. This is the best impeller if you want to maximize the bottom end and rough water hook up of your JetSki.
Learn More -
Jet Dynamics Intake Grate - Kawasaki SXR 1500 (Deep)
Jet Dynamics Intake Grate #57 (Deep) for all Kawasaki SXR 1500 Models.
Part Number: 02-01-110
Learn More -
Jet Dynamics Intake Grate - Kawasaki SXR 1500 (Medium Deep)
Jet Dynamics Intake Grate #56 (Medium Deep) for all Kawasaki SXR 1500 Models.
Part Number: 02-01-109
Learn More -
Jet Dynamics Ride Plate - Kawasaki SXR 1500
Jet Dynamics Ride Plate #SXR1500. Incredible Patented Concave Design. Fits all Kawasaki SXR 1500 Models.
Part Number: 02-01-259
Learn More -
Race Diffusor Sponsons - SXR 1500
The all new PWC Art Kev-Racing Kawasaki SXR 1500 Race Diffusors are created with passion to evolve the riding experience. Tested by Pro racers for over two years these sponsons are nothing less than Championship proven.
Part Number: 02-01-024
Learn More -
Solas KGX Pump Rebuild Kit SXR 1500
Solas Magnum Pump Bearing Seal Rebuild kit for Kawasaki SXR 1500 KGX Pumps. Includes bearings and Seals.
Part Number: 02-02-026
Learn More -
Solas Magnum Pump - Kawasaki SXR 1500
The SOLAS 12 Vane Stainless Steel Magnum Pump is a direct bolt-on performance upgrade. The one piece investment cast stainless steel pump offers improved bottom end acceleration, improved hook-up, and up to 2 mph top speed gain over the OEM Kawasaki SXR 1500 pump. Pump Includes bearings, seals, shaft and pump cone.
Part Number: 02-02-024
Learn More -
Solas Magnum Pump Assembly - Kawasaki SXR 1500
The Solas KGX-PM-148/74T 12-Vane Stainless Steel Jet Pump is a direct bolt-on performance upgrade. The one-piece, investment cast stainless steel pump offers increased bottom-end acceleration, improved hook-up, and up to 2mph top speed gain over the OEM pump. Oversized bearing housing supports and includes 3 high-quality sealed bearings, seals, shaft and billet aluminum pump cone. Complete Kit includes reduction nozzle and return assisted trim/steering nozzle along with interchangeable nozzle rings for fine tuning.
Part Number: 02-02-025
Learn More -
VK Carbon Tri-Wave Rideplate - Kawasaki SXR 1500 (Short)
VK Composites Carbon Look Infused Epoxy Resin Tri-Wave Rideplate for 2017 and Newer Kawasaki SXR 1500 Models. Length: 15.75 inches
Part Number: 02-01-704
PLEASE NOTE: This product is currently unavailable.Learn More -
WORX Intake Grate - WR248 - Kawasaki SXR 1500
WORX WR248 Intake Grate for 2017 and Newer Kawasaki SXR 1500. If you want the ultimate in hook-up and handling this is the intake grate for you. Designed specifically for choppy environments, this intake grate sacrifices a small amount of speed in favor of superior handling.
Part Number: WR248
Learn More -
WORX Sponsons - WR560-I - Kawasaki SXR 1500
WORX Racing rear Sponsons for Kawasaki SXR 1500 Models. Designed not just for cutting edge performance but killer style! Features 4 point adjustment to personalize your watercraft to your own unique riding style! A must do modification for maximum hook up and handling. Instructions and all mounting hardware included.
Part Number: WR560-I
Learn More -
WSM Bearing Housing - Kawasaki 550-1500
WSM Aftermarket Driveshaft Bearing Housing Assembly for Kawasaki 550, 650, 750, SXR 800, 900, 1100, 1200 and 1500 Models. Comes complete with bearings, seals and snap ring circlip. Manufactured to OEM specifications. Replaces OEM Kawasaki PN#'s 13091-3730, 13280-3730, 13280-3756.
Part Number: 003-405-01
Learn More -
WSM Bearing Housing Rebuild Kit - Kawasaki 550-1500
WSM Aftermarket Driveshaft Bearing Housing Rebuild Kit for Kawasaki 550, 650, 750, SXR 800, 900, 1100, 1200 and 1500 Models. Comes complete with bearings, seals (snap ring circlip sold separately). Manufactured to OEM specifications. Kit includes replacements for the following OEM Kawasaki PN#'s 92049-3707 (QTY: 2), 92050-502 (QTY: 1), 92050-503 (QTY: 1), 92045-3705 / 92045-0113 (QTY: 1) .
Part Number: 003-611
Learn More