Pump & Handling

Pump & Handling

Items 1 to 16 of 265 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • Billet Drive Couplers - Kawasaki

    Kawasaki billet driveline couplers. Machined from 6061- T6 aluminum for superior strength and durability. The threads are the standard 20-1.5mm that fits the SXR crankshaft and driveshaft. These are sold as a set. Anodized Clear.

    Part Number: 02-02-204

    Learn More
    $79.95

  • Billet Drive Couplers - Yamaha

    Yamaha Billet Driveline Couplers. Updated design for 2018! These are now lighter and have built-in hex for easy installation with an adjustable wrench. Fits all Yamaha Superjet and WaveBlaster Models except for 1991 and some 1992 Yamaha 650 SJ's. Machined from 6061-T6 aluminum for superior strength and durability. Made in USA! Color: Anodized Clear

    Part Number: 02-02-251

    Learn More
    $79.95

  • Blowsion Aluminum Intake Grate - Superjet

    Blowsion Lightweight Aluminum Intake grate for all years Yamaha Superjet. Made exclusively for us by Skat-Trak. Unreal performance gains on the new 2008+ current Super Jet for racers as well as freeriders.

    Part Number: 02-01-171

    Learn More
    $312.00

  • Blowsion Composite Ride Plate - SXR "Midi"

    Blowsion Composite Ride Plate - Kawasaki SXR "Midi" Mid Length. Fits all 2003-2011 Kawasaki SXR Models. Running Tubbies and want to run hull extensions or add less nose pressure? Trim and go. Light is right! Weight 2.5lbs US.

    Part Number: 02-01-250

    Learn More
    $239.95

  • Blowsion Kustom Cut-Back Stainless Impellers

    Increased acceleration, bottom end hook-up and hi-rev grunt are only a few of the advantages of the revolutionary Blowsion Large Magnum Hub cut-back impellers now being offered.

    Learn More
    $329.95

  • Blowsion Midshaft Spacer Plate

    Blowsion Midshaft Spacer Plate has been designed for use with OEM mid shaft housing in combination with many aftermarket hulls. Many of the aftermarket hulls available today do not have the recessed lip that OEM Midshaft housing require in order to flex as you are riding your watercraft. Without this midshaft spacer you risk stripping the splines of your driveline short shaft and driveshaft due to the inability of the driveline to flex properly.

    Part Number: 04-04-062

    Learn More
    $32.00

  • Blowsion Pump Bolt Kit

    Blowsion Stainless Steel Pump Bolt Kit for all Yamaha Superjet and Rickter Models. The Socket Head Bolt design allows for use of hex key tool which results in much easier access. A Great replacement for OEM Yamaha Part Number: 90119-10948-00. Kit Includes 4 Bolts and 4 Washers.

    Part Number: 02-02-478

    Learn More
    $29.99

  • Blowsion Pump Bolt Kit Long 155MM

    Blowsion Stainless Steel Pump Bolt Kit for Yamaha 155mm Pump Conversions with threaded wear ring. The Socket Head Bolt design allows for use of hex key tool which results in much easier access. Kit Includes 4 Bolts.

    Part Number: 02-02-479

    Learn More
    $75.00

  • Blowsion Pump Shoe - Yamaha 144MM

    Blowsion Aluminum Pump Shoe for Yamaha 144mm Pumps. Replace that easily broken OEM plastic intake duct with this unbreakable aluminum replacement. Fits all years Yamaha Superjet, 1993-1996 WaveBlaster 1, Polaris Octane and Rickters. Mounting holes are not drilled or tapped so install in the different Yamaha design aftermarket hulls can be facilitated.

    Part Number: 02-02-432

    Learn More
    $139.95

  • Blowsion Pump Shoe - Yamaha 148MM

    The Blowsion 148mm Aluminum Pump Shoe was designed for fitting larger 148mm pumps into both Yamaha Superjet and aftermarket hulls. Using our 148mm shoe vs a 144mm (stock Superjet size) will greatly increase hook up and drive when used in conjunction with 148mm pumps. Fits all years Yamaha Superjet, 1993-1996 WaveBlaster 1, Polaris Octane and Rickters. Mounting holes are not drilled or tapped so installation in the different Yamaha design aftermarket hulls can be facilitated.

    Part Number: 02-02-434

    Learn More
    $149.95

  • Blowsion Stainless Steel Intake Grate - Superjet

    Blowsion Stainless Steel Intake grate for all years Yamaha Superjet. If you want to stay hooked-up in Race or Surf conditions alike then try the Blowsion Stainless Yamaha Super Jet Intake Grate.

    Part Number: 02-01-170

    Learn More
    $312.00

  • Blowsion Tilt Kit - Yamaha

    Full THROW! This is the real deal designed for the aggressive Rickter, Super Jet, Blaster, Polaris Octane and any aftermarket hull purist wanting the extra edge for back flips and barrel rolls. This deluxe kit is install and ride. Available for 144mm/148mm & 155mm/160mm Pumps.

    Learn More
    $984.00

  • BMS Impeller Shaft Tool - Kawasaki SXR 1500

    Broward Motorsports Prop Removal Tool for the Kawasaki SXR 1500. Tired of damaging your pump shaft every time you put it in a vice to remove your prop? Those days are over! Broward Motorsports has designed the most advanced tool for holding your impeller shaft in a vice while breaking that hard to remove impeller!

    Part Number: BM41-60-8

    Learn More
    $167.95

  • Cold Fusion Driveshaft Alignment Tool - Yamaha

    The Cold Fusion Driveline Alignment Tool gives you a proper method and fixtures to center your pump to the mounting points of your mid-shaft assembly (half the battle) and it provides a method to insure the drive line is parallel to the mid-shaft and square to the firewall. Fits Yamaha style pump and midshaft assemblies.

    Part Number: 04-04-064

    Learn More
    $64.00

  • Coupler Dampener - Yamaha / Kawasaki

    Rubber Coupler Dampener for use with Blowsion billet Yamaha Superjet and Kawasaki aftermarket Drive Couplers.

    Part Number: 02-02-205

    Learn More
    $22.50

  • Destroyer Hardware Kit

    Replacement Hardware Install Kit for Blowsion Tubbie Destroyer Sponsons.

    Part Number: 02-01-021

    Learn More
    $59.95

Items 1 to 16 of 265 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5