Hull Components

Hull Components

Items 1 to 16 of 84 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • Bilge Fitting 45-Degree

    Blowsion 45-Degree machined aluminum bilge fittings are a clean replacement of the bulky plastic fittings usually supplied with aftermarket bilge pump kits. Available in Anodized Black or Clear.

    Learn More
    $21.95

  • Bilge Fitting Pro

    Blowsion machined aluminum 3/4 inch bilge fittings are a clean replacement of the bulky plastic fittings usually supplied with aftermarket bilge pump kits. Available in Clear, Black, Green, Red, Blue, Orange and Purple anodized colors.

    Learn More
    $21.95

  • Bilge Fitting Straight

    Blowsion machined aluminum straight bilge fittings are a clean replacement of the bulky plastic fittings usually supplied with aftermarket bilge pump kits. Available in Clear, Black, Green, Red, Blue & Orange anodized colors.

    Learn More
    $17.95

  • Bilge Pump - Rule - 500GPH

    Rule Non-Automatic 500GPH Fully Submersible 12 Volt DC bilge pump. Unmatched in pumping power and longevity. Higher Flow – optimized impeller to provide greater flow at the same amperage. Back Flow Prevention - reduces the amount of water left over in the bilge, reducing odor and helping keep your bilge cleaner. Easy to mount and ready to go!

    Part Number: 06-01-001

    Learn More
    $34.95

  • Bilge Pump - Rule - 500GPH Automatic

    Rule 25SA Fully Submersible Bilge Pump, 500 Gallon Per Hour, 12 Volt DC, Automatic Electronic Sensing. Bilge Pump turns on and checks for water approximately every 2-1/2 minutes. If resistance (water) is found, it will run for as long as water is present. When all the water is pumped out, the pump shuts off and returns to its 2-1/2 minute test cycle.

    Part Number: 06-01-002

    Learn More
    $99.99

  • Bilge Pump Dual Mount - Kawasaki

    Dual bilge pump mounting bracket for Kawasaki Sxi Pro and KAWASAKI SXR 800. The bracket locates the pumps within millimeters from the base of the KAWI hull. Easy built in installation, no messy adhesives. Material: Aluminum. Color: Anodized Black.

    Part Number: 06-01-101

    Learn More
    $47.10

  • Bilge Pump Hose - 10FT

    Blowsion Bilge Pump Hose - 10 Foot Section is plenty for most dual pump and custom applications. Color: Black Only. Hose Diameter (ID): 3/4" inch.

    Part Number: 06-01-302

    Learn More
    $23.00

  • Bilge Pump Hose - 3FT

    Blowsion Bilge Pump Hose - 3 Foot Section is plenty for most single pump applications. Color: Black Only. Hose Diameter (ID): 3/4" inch.

    Part Number: 06-01-301

    Learn More
    $7.00

  • Bilge Pump Mount - Kawasaki 550/650/750SX

    The Blowsion Bilge Pump Mount is designed to mount the Rule Bilge Pump (Sold Separately). Includes rivets to mount bilge pump strainer to bracket. Fits all Kawasaki 550SX, 650SX and 750SX Models. Material: Aluminum. Color: Anodized Black.

    Part Number: 06-01-106

    Learn More
    $29.95

  • Bilge Pump Single Mount - Kawasaki

    Single bilge pump mounting bracket for Kawasaki Sxi Pro and KAWASAKI SXR 800. Single pump mounting bracket for Kawasaki Sxi Pro and KAWASAKI SXR 800. The bracket locates the pump within millimeters from the base of the KAWI hull. Easy built in installation, no messy adhesives. Material: Aluminum. Color: Anodized Black.

    Part Number: 06-01-102

    Learn More
    $29.95

  • Bilge Switch - Handlebar Mount - Universal

    Universal Handle Bar Mount Bilge Switch. Fits any watercraft handle bars on the market. Anodized Black.

    Part Number: 06-01-212

    Learn More
    $99.95

  • Bilge Switch - Start Stop Switch Mount - Kawasaki

    This Sano Bilge Switch Mounts Directly to the Bottom of the OEM Start / Stop Switch Housing on most Kawasaki Watercraft. Does not work on JS300, JS650 or X2 models.

    Part Number: 06-01-213

    Learn More
    $99.95

  • Bilge Switch Replacement - 9ft Wire

    Finally- a replacement switch and 9 feet of cable for the always popular handlebar mount switches.

    Part Number: 06-01-215

    Learn More
    $77.95

  • Billet Carburetor Block Off

    Sanitary anodized and engraved Blowsion logo carburetor block off. A necessity when using a remote fuel pump. Fits all Mikuni carbs. Billet aluminum with all stainless hardware included.

    Part Number: 01-02-557

    Learn More
    $39.95

  • Blowsion Billet Fuel Cap - Kawasaki

    New Low Profile Lightweight Design. Sanitary and functional with integrated chain clip. The Blowsion Billet aluminum Kawasaki fuel caps fit all Kawasaki standups and most sit-downs. Vortex design shape with engraved grooving allows for easy handling. Available in all colors!

    Learn More
    $75.00

  • Blowsion Billet Fuel Filler Neck - Kawasaki

    Blowsion Billet aluminum fuel cap socket filler neck. Fits all years Kawasaki SXR 800, SXR 1500, 750 SX, SXI and SXI Pro, ZXi, and STX models. Works with stock plastic or aftermarket billet gas caps. Available in Black or Clear.

    Learn More
    $55.00

Items 1 to 16 of 84 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5