Blowsion Billet

Blowsion Billet

Items 1 to 16 of 40 total

per page

Page:
  1. 1
  2. 2
  3. 3
  • Bilge Fitting 45-Degree

    Blowsion 45-Degree machined aluminum bilge fittings are a clean replacement of the bulky plastic fittings usually supplied with aftermarket bilge pump kits. Available in Anodized Black or Clear.

    Learn More
    $15.95

  • Bilge Fitting Straight

    Blowsion machined aluminum straight bilge fittings are a clean replacement of the bulky plastic fittings usually supplied with aftermarket bilge pump kits. Available in Clear, Black, Green, Red, Blue & Orange anodized colors.

    Learn More
    $15.45

  • Billet Choke Knob - Yamaha

    Blowsion Billet Choke Knob. Direct replacement for YAMAHA OEM Plastic choke knob. Installs with OEM set screw (Not Included). Fits all Years Yamaha Superjet, FX1 and WaveBlaster Models. Bright Dip Anodized Black.

    Part Number: 04-03-351

    Learn More
    $29.95

  • Billet Fuel Select - Yamaha

    Sanitize the dash of your Yamaha controls with this Blowsion Billet Dash Knob. Replaces the OEM Yamaha plastic ON/OFF/RESERVE Knob. Uses OEM screw to mount. Fits all years Yamaha Superjet, FX1 and WaveBlaster Models. Also Compatible with most Yamaha 2-Stroke Sitdown Models (Wave Jammer, Wave Runner, Wave Raider, VXR). Bright Dip Anodized Black. 1 Per Package.

    Part Number: 04-03-352

    Learn More
    $29.95

  • Blowsion 8mm Billet Conical Washers

    Blowsion 8mm Billet Conical Washers. Replace the brittle and breakable plastic nylon washers that are included with Rickter and many aftermarket hulls. Available in all Colors!

    Learn More
    $19.95

  • Blowsion Billet Exhaust Nozzle - Kawasaki SXR

    This is one super clean exhaust nozzle to clean up and sanitize the rear of your SXR. Function and fit are Blowsion perfect. Fits over OEM Exhaust Flange. Vanity rules on these beauties. Fits all Kawasaki SXR 800 and SXR 1500 Models. Available in all anodized colors!

    Learn More
    $78.60

  • Blowsion Billet Exhaust Nozzle - Yamaha Superjet

    Blowsion Billet Exhaust Nozzle for all 1996-2020 Yamaha Superjet Models. Updated carefully for 2008 to fit the new narrower Super Jet bottom hull as well as 1996-2007 models. This is one ultra off the hook nozzle. Function and fit are Blowsion perfect. Fits over OEM exhaust flange. Vanity rules on these beauties. Available in all colors!

    Learn More
    $78.60

  • Blowsion Billet Fuel Cap - Kawasaki

    New Low Profile Lightweight Design. Sanitary and functional with integrated chain clip. The Blowsion Billet aluminum Kawasaki fuel caps fit all Kawasaki standups and most sit-downs. Vortex design shape with engraved grooving allows for easy handling. Available in all colors!

    Learn More
    $65.00

  • Blowsion Billet Fuel Cap - Yamaha

    Blowsion Low Pro Billet aluminum fuel caps for all Yamaha watercraft. Low profile smooth design allows for outside fueling, yet will not get in the way during aerial or freestyle moves around the front of the watercraft. Available in all anodized colors!

    Learn More
    $65.00

  • Blowsion Billet Fuel Filler Neck - Kawasaki

    Blowsion Billet aluminum fuel cap socket filler neck. Fits all years Kawasaki SXR 800, SXR 1500, 750 SX, SXI and SXI Pro, ZXi, and STX models. Works with stock plastic or aftermarket billet gas caps. Available in Black or Clear.

    Learn More
    $49.95

  • Blowsion Billet Fuel Filler Neck - Yamaha

    Blowsion Billet Fuel Filler Neck For ALL Yamaha PWC. Available in Black or Clear. Learn More
    $49.95

  • Blowsion Billet Hood Bumper - Kawasaki SXR/750

    Blowsion Direct Billet Replacement for OEM Kawsaki SXR and 750SX, SXI, & SXi-Pro hood bumpers. Anodized Black.

    Learn More
    $67.95

  • Blowsion Billet Hood Latch

    Replace your rear factory hood latch with a billet aluminum BLOWSION latch and ride worry free. Recently updated and re-machined to also fit the Kawasaki SXR 800 and SXR 1500. Also fits all years Yamaha FX1 and all years Yamaha Super Jet. A must for surf and big wave riders, especially those running a BLOWSION pole limiting rope. Requires the stock base locking hardware. Now available in more colors- Anodized Green, Red, Blue, Orange, Clear and Black!

    Learn More
    $59.95

  • Blowsion Billet Strap Hook

    NEW! - The Blowsion Billet Strap Hook. Replaces OEM Yamaha style waterbox, battery, and fuel tank strap hooks. Fits ALL years Yamaha Superjet, Rickter Hulls, Lightweight.DE, and many other aftermarket superjet based hull types. The Blowsion Strap Hook incorporates a removable 3mm set screw that retains the strap in place so that it cannot come off. This innovative little feature works perfectly for the hard to reach strap hooks where the straps have a tendency to come off. Price includes one hook, one M6 x 16mm bolt and a M3 x 6mm bolt. Available in Red, Black, Green, Orange and Blue Anodized Colors.

    Learn More
    $17.95

  • Blowsion Bow Hook

    Blowsion Billet Aluminum Bow Hook. Fits Most Aftermarket Hulls. Includes Stainless Steel Installation Hardware and Backing Plate. Available in Black, Blue, Green, Red and Orange Anodized Colors.

    Learn More
    $39.95

  • Blowsion Dash Knob - Kawasaki

    Blowsion Billet Dash Knob. Direct replacement for OEM Kawasaki Plastic Knobs. Bright Dip Anodized. 1 Per Package. Fit all Kawasaki 750 Sxi and SXR 800 Models. Sanitize your dash--the finishing touch when also combined with our billet dashboard plates on the 750 Sxi. (NOTE: Not to be used as Star Trek badge Identification.)

    Learn More
    $25.95

Items 1 to 16 of 40 total

per page

Page:
  1. 1
  2. 2
  3. 3