Bilge

Bilge

Items 1 to 16 of 19 total

per page

Page:
  1. 1
  2. 2
  • Bilge Fitting Pro

    Blowsion machined aluminum 3/4 inch bilge fittings are a clean replacement of the bulky plastic fittings usually supplied with aftermarket bilge pump kits. Available in Clear, Black, Green, Red, Blue, Orange and Purple anodized colors.

    Learn More
    $21.95

  • Bilge Fitting Straight

    Blowsion machined aluminum straight bilge fittings are a clean replacement of the bulky plastic fittings usually supplied with aftermarket bilge pump kits. Available in Clear, Black, Green, Red, Blue & Orange anodized colors.

    Learn More
    $17.95

  • Bilge Pump - Rule - 500GPH

    Rule Non-Automatic 500GPH Fully Submersible 12 Volt DC bilge pump. Unmatched in pumping power and longevity. Higher Flow – optimized impeller to provide greater flow at the same amperage. Back Flow Prevention - reduces the amount of water left over in the bilge, reducing odor and helping keep your bilge cleaner. Easy to mount and ready to go!

    Part Number: 06-01-001

    Learn More
    $34.95

  • Bilge Pump - Rule - 500GPH Automatic

    Rule 25SA Fully Submersible Bilge Pump, 500 Gallon Per Hour, 12 Volt DC, Automatic Electronic Sensing. Bilge Pump turns on and checks for water approximately every 2-1/2 minutes. If resistance (water) is found, it will run for as long as water is present. When all the water is pumped out, the pump shuts off and returns to its 2-1/2 minute test cycle.

    Part Number: 06-01-002

    Learn More
    $99.99

  • Bilge Pump Hose - 10FT

    Blowsion Bilge Pump Hose - 10 Foot Section is plenty for most dual pump and custom applications. Color: Black Only. Hose Diameter (ID): 3/4" inch.

    Part Number: 06-01-302

    Learn More
    $23.00

  • Bilge Pump Hose - 3FT

    Blowsion Bilge Pump Hose - 3 Foot Section is plenty for most single pump applications. Color: Black Only. Hose Diameter (ID): 3/4" inch.

    Part Number: 06-01-301

    Learn More
    $7.00

  • Bilge Switch - Handlebar Mount - Universal

    Universal Handle Bar Mount Bilge Switch. Fits any watercraft handle bars on the market. Anodized Black.

    Part Number: 06-01-212

    Learn More
    $99.95

  • Bilge Switch Replacement - 9ft Wire

    Finally- a replacement switch and 9 feet of cable for the always popular handlebar mount switches.

    Part Number: 06-01-215

    Learn More
    $77.95

  • Blowsion CAS Billet Aluminum One Way Valve Scupper

    Our new CAS (cool as S*%!) flow valve design prevents water getting in during tail stands, wave jumping, or all out buoy shredding. The new billet flange assembly allows use of our billet exhaust outlet so vain riders can sanitize both sides of the rear of their ski. Fits all years Yamaha Superjet, Kawasaki 650, Kawasaki 750, Kawasaki SXR 800, Polaris Octane, Rickter XFS, Rickter XFR, Rickter EVO, Rickter Edge and Most Aftermarket Hulls.

    Part Number: 06-01-022

    Learn More
    $161.50

  • Blowsion Dash Fitting

    Blowsion machined aluminum dash fittings are used to recess mount rotary bilge switches and/or primer bulbs in the dash of your ski. Available in Black, Blue, Red, Green, Orange, Clear, Purple and Teal colors.

    Learn More
    $30.00

  • CAS Billet Aluminum Flange Only

    Available for riders wanting to use the end flange only for custom scupper and rear exhaust installations etc. The new billet flange assembly is the premium design setup and allows use of the Blowsion billet exhaust outlet so vain riders can sanitize both sides of the rear of their watercraft. Fits all years Super Jet, KAWI 750 and SXR 800, KAWI 650, and Polaris Octane. Anodized Clear.

    Part Number: 06-01-023

    Learn More
    $99.15

  • Expanding Foam (2 Part) - Pint Kit

    No more home insulation foam in a can. This is the real deal. Marine quality expanding foam. Mix equal parts A and B in the supplied mixing cups and you have waterproof and cured foam expanding in 60 seconds or less.

    Part Number: 06-03-131

    Learn More
    $54.95

  • Expanding Foam (2 Part) - Quart Kit

    No more home insulation foam in a can. This is the real deal. Marine quality expanding foam. Mix equal parts A and B in the supplied mixing cups and you have waterproof and cured foam expanding in 60 seconds or less.

    Part Number: 06-03-132

    Learn More
    $69.95

  • OEM Bullet Terminals - 20 Pack

    Replacement OEM bullet connectors now available at Blowsion. Kit includes 20 Male and Female terminals with Insulators. Perfect for those super sanitary bilge kit installations or replacements for Electrical box connections.

    Part Number: 01-04-418

    Learn More
    $20.95

  • OEM Bullet Terminals - 5 Pack

    Replacement OEM bullet connectors now available at Blowsion. Kit includes 5 Male and Female terminals with Insulators. Perfect for those super sanitary bilge kit installations or replacements for Electrical box connections.

    Part Number: 01-04-417

    Learn More
    $7.95

  • One Way Valve Kit - Pro Finish

    The pro-finish kit, which allows for a completely sanitized rear outlet, (paint and finish work required).

    Part Number: 06-01-028

    PLEASE NOTE: This product has been discontinued.
    Learn More
    $99.95

    Out of stock

Items 1 to 16 of 19 total

per page

Page:
  1. 1
  2. 2