Engine Performance
-
VK Carbon B-Pipe Exhaust Chamber (MOD)
VK Composites Carbon Fiber B-Pipe Exhaust Chamber (Mod). Full Carbon with High Temp Epoxy Resin. Brass Water Injection Insert Included.
Part Number: 01-01-365
PLEASE NOTE: This product is currently unavailable.Learn More -
FP Headpipe Water Screw Kit - SHCS
Blowsion Adjustable SHCS Factory Pipe Headpipe Water Screw Kit - Standard Size. Socket Head Cap Screw Design provides adjustments for tuning. This kit is a direct replacement for those seized up water adjusting screws. Compatible with all Factory Headpipes. Kit Includes 3 screws, 3 nuts and hex key.
Part Number: 01-01-743
Learn More -
GET C1 Hour Meter
The GET C1 Engine Hour Meter keeps track of your engine's service life. The meter fits to any bike in minutes without any wiring needed and detects the engine by identifying wave frequencies that flow through the surface it sits on.
Part Number: 06-04-092
Learn More -
Blowsion Fuel Tank
The Blowsion Fuel Tank is specially designed to work in conjunction with the aftermarket lay down style exhaust systems that don't work with the OEM Yamaha Fuel Tank (RRP, TNT, PowerFactor). One of the main problems with using these exhaust systems is the battery has to be relocated which can cause quite the problem. The Blowsion Fuel Tank is unique as it has a cut out in the front of the tank that enables you to relocate your battery with ease. Fuel Capacity: 4 Gallons.
Learn More -
1/4" Quick Disconnect / Fuel Restrictor
The 1/4" Quick Disconnect / Fuel Restrictor can be used as fuel line quick disconnect and/or for fuel restriction. Pre-tapped and threaded to accept Mikuni Main Jet (Jets not included). Includes stainless steel hose clamps. Now Available in all colors!
Learn More -
Keihin Carb Rebuild Kit 38-44MM CDK-II
Aftermarket Keihin Carburetor Rebuild Kit for 38mm, 40mm, 42mm and 44mm CDK-II Carburetors. Fits wide range of 38-44mm Keihin™ CDK-II carbs found on PWC. Includes Viton™ tipped inlet needle.
Part Number: 01-02-492
Learn More -
Blowsion Strap Hook Base
Blowsion Billet Strap Hook Base. With the ever evolving aftermarket hulls and different engine configurations available in today's market the Blowsion Mechanic team consistently ran into problems with having to relocate individual components E.G Exhaust, Battery and Mounting Straps etc... So they went to work and designed a Billet Aluminum Strap Hook Base. Available in all colors! Strap Hook Sold Separately.
Learn More -
3/8" Quick Disconnect / Water Restrictor
The 3/8" Quick Disconnect / Water Restrictor can be used as Quick Disconnect or use one of 3 supplied brass inserts to restrict the flow of water or increase pressure where it is needed. Includes 3 brass restrictors and stainless steel hose clamps. Now Available in all colors!
Learn More -
TNT Exhaust Mounting Block
Blowsion TNT Exhaust Mounting Block. The foam blocks are designed to hold the pipe in position so that the coupler and stinger height match up perfectly to the manifold and waterbox. Perfect alignment will help optimize performance and increase longevity of the rubber couplers. Kit includes 3 individual foam blocks with 3M adhesive backing. Compatible with all TNT, RRP Carbon and PowerFactor Style Exhaust Systems.
Part Number: 01-01-168
Learn More -
T Fitting 3/8" x 1/4" x 3/8" Barbed - Black
3/8" x 1/4" x 3/8" Barbed Reducer T Hose Fitting. Useful for different types of water routing applications. Primarily used with Water Injection. Color: Black
Part Number: 01-01-070
Learn More -
Throttle Cable Drum
Billet aluminum throttle drum for maximum throttle adjustments. Machined from 6061-T6 aluminum and anodized for corrosion protection. Features 9 different hole locations for the throttle cable to attach. Now available in 5 different colors!
Learn More -
Blowsion Water Injection Fitting
Blowsion Exhaust Water Injector Brass Fitting. Tapped and threaded for a Mikuni Main Jet. 1/4" Hose Barb x 1/8" NPT. Bidirectionally slotted for better cooling. Used on aftermarket high performance exhaust systems (TNT/Powerfactor/RRP).
Part Number: 01-01-075
Learn More -
TNT Waterbox Coupler 2.25"
2.25 Inch Heavy Duty 6 Ply Waterbox Coupler for TNT V2/V3 Exhaust Systems. Connects Exhaust Chamber to the Waterbox. 2.25 (ID) x 5.125 (LENGTH).
Part Number: 01-01-166
Learn More -
PowerFactor/TNT Exhaust Coupler 3.5"
3.5 Inch Heavy Duty 6 Ply Exhaust Coupler for TNT V2/V3 and PowerFactor Exhaust Systems. Connects Exhaust Manifold to Chamber.
Part Number: 01-01-167
Learn More -
Blowsion Fuel Tank Fitting
Blowsion Fuel Tank Fitting with Rubber Grommet. 1/4 Hose Barb. Compression Fit. Install with 17/32 Drill Bit.
Part Number: 01-02-598
Learn More