Products
PWC Parts
Helmets
Apparel
Services
Specials
Search Products
Search Results
Search for:
*
in Product Line:
Kawasaki 800 SX-R
Records Returned
250
Records Displayed.
Refine Search
Accessories
Aluminum/Stainless
Composites
Upholstery
New Search
Advanced Search
Advent CDI Mounting Plate - SXR
Advent Ignition Mounting Plate. Fits all years SXR 800.
Item #:
01-04-442
Price:
$25.40
Blowsion Timing Curve
Stock
Freeride
Limited/Flat water
Superstock/Big Bore/Race Gas
Custom curve set (specify request via email)
Model Year
2003-09+ Kawi SXR and all 1998-02 Kawi750 SXi Pro
Product Details
Advent CDI Remote Switch
Allows you to change between the four pre-programmed curves without opening the electrical box. Mounts inside the engine compartment for easy access.
Item #:
AWACT3SW
Price:
$82.78
Product Details
Advent Programmable Igntition - Kawasaki
The Tempest 3 (T3) ignition from Advent is the leading edge in ignition technology. Re-engineered for 2005 with 100% relaibility as THE main improvement the T3 ignition is the most complete and reliable solution to engine control.
Item #:
KASRACT3
Price:
$535.00
Blowsion Timing Curve
Stock
Freeride
Limited/Flat water
Superstock/Big Bore/Race Gas
Custom curve set (specify request via email)
Model Year
2003-09+ Kawi SXR and all 1998-02 Kawi750 SXi Pro
Product Details
Alum Handlepole Conversion- UMI, RRP, AC Racing
Save money and buy as a kit! Get rid of that bulky fiberglass Kawasaki stock handle pole and finish the last unfinished piece of the puzzle of the incredible SXR handling package. NOTE: All conversion kits parts also available seperately.
Item #:
KASRAC190
Price:
$1,045.00
Carbon Chin Pad Color
Black/Black
Black / Silver
Black / White
Black/Red
Black / Green
Carbon Silver / Carbon Silver
Custom Color (Enter color choice at end of order)
Handlepole Brand
AC Racing
UMI Racing (add $180.00)
RRP Adjustable - Twin tube (add $295.00)
Handlepole Finish Color - AC / UMI
Black Powder Coat
Bare Aluminum (subtract $20.00)
Solid Lime Green SXR - 2005-2007 (add $150.00)
Kandy Kawasaki Green SXR - 2003-2004 (add $150.00)
Kandy Red (matches SJ and 2004 SXR 800) (add $150.00)
Kandy Yamaha Blue (add $150.00)
Pole Length - AC / UMI
Std. Length
Minus - 2 "
Tube Color- Anodized - RRP Pole Only
Clear Anodized (Supplied color)
Anodized Green (4+ week delay if not in stock) (add $100.00)
Anodized Red (4+ week delay if not in stock) (add $100.00)
Anodized Black (4+ week delay if not in stock) (add $100.00)
Anodized Gold (4+ week delay if not in stock) (add $100.00)
Anodized Blue (4+ week delay if not in stock) (add $100.00)
Anodized Orange (4+ week delay if not in stock) (add $100.00)
Turnplate Length
Standard Length
Minus - 1"
Product Details
Aluminum Handle Bar Grip Lock Ring - ODI
Anodized billet aluminum lock ring from ODI. Custom Blowsion colors to make your friends jealous. Fits Lock-On grip system.
Item #:
GLRAL
Price:
$15.45
Color
*NEW* Anodized Yellow
*NEW* Anodized Orange
Anodized Kawi Green
Anodized Clear
Anodized Red
Anodized Blue
Anodized Purple
Product Details
Aluminum Waterbox - Baffled
TDR Silencer Baffled Waterbox. This baffle design waterbox is for the stand up and Blaster rider who wants a power increase with a deep throaty sound. This waterbox design works well with mildly and highly modified Yamaha and Kawasaki engines.
Item #:
01-01-405
Price:
$229.95
Watercraft Make/Model
Yamaha Super Jet - 96-Present (02-0050-B)
Kawasaki SXR 800 (02-0073-B)
Kawasaki 750SX only up to 1995 (01-01-405)
Yamaha Wave Blaster (02-0073-B)
Product Details
Battery Box - Aluminum
Aluminum battery box replacement. Direct fit replacement for all years Yamaha Super Jet, Fx1 and Polaris Octane. Can be fit as replacement to all Years KAWI 750 and SXR 800 with minor battery strap modifications.
Item #:
AWAL300
Price:
$69.95
Product Details
Bilge Fitting - 45 Degree
Billet aluminum bilge fittings with a 45 degree outlet. Clear Anodized and Black Anodized.
Item #:
UJS02201
Price:
$15.30
Color
Anodized Black
Anodized Clear
Product Details
Bilge Fitting - Straight
Billet aluminum bilge fittings with a straight outlet. Now available in Team Green and Red to match the 2004 SXR and Super Jet!
Item #:
UJS02200
Price:
$14.60
Color
Anodized Clear
Anodized Blue
Anodized Red
Anodized Orange
Anodized Team Green
Anodized Yellow/Gold
Anodized Black
Product Details
Bilge Pump
Bilge Pump - Rule - 500GPH. Easy to mount and ready to go !
Item #:
AWAC140
Price:
$28.95
Product Details
Bilge Pump Hose - 10 foot length
Bilge Pump Hose - 10 foot section is plenty for most dual pump and custom applications. COLOR: Carbon Black only. PN# 06-01-302
Item #:
AWAC142
Price:
$12.00
Product Details
Bilge Pump Hose - 3 foot length
Bilge Pump Hose - 3 foot section is plenty for most single pump applications. COLOR: Carbon Black only. PN# 06-01-301
Item #:
AWAC141
Price:
$6.00
Product Details
Bilge Switch - 3 Position
Waterproof bilge switches are corrosion resistant and have withstood the most abuse we can give them. Dash mountable and easy to install.
Item #:
AWAC128
Price:
$39.95
Product Details
Bilge Switch - Seperate
Finally- a replacement switch and 9 feet of cable for the always popular handlebar mount switches. Now you no longer have to buy a new housing if your switch goes bad.
Item #:
01-05-699
Price:
$59.95
Product Details
Bilge Switch - Start Stop Switch Mount - Kawasaki
This sano switch mounts directly to the bottom of the OEM start/stop switch housing of all Kawasaki watercraft.
Item #:
AWAC23-0218
Price:
$74.95
Product Details
Bilge Switch - Universal Handle Bar Mount
Black anodized. Universal Mount. Fits any watercraft handle bars on the market.
Item #:
AWAC0217
Price:
$74.95
Product Details
Bilge Switch Cover
Protect your Blowsion rotary bilge switch with this sanitary powder coated black aluminum switch shield.
Item #:
AWAC129
Price:
$35.25
Product Details
Blowsion Billet Carb Block Off
Sanitary anodized and engraved Blowsion logo carb block off. A necessity when using a remote fuel pump. Fits all Mikuni carbs. Billet aluminum with all stainless hardware included.
Item #:
01-02-557
Price:
$39.95
Product Details
Blowsion Billet Throttle Lever
Machined with the stand-up rider comfort at a premium, our new Blowsion straight pull finger throttles are ergonomically designed for premium fit and feel whether you are on the waves or on the buoys.
Item #:
03-01-605
Price:
$68.50
Color
Anodized Clear
Anodized Black
Anodized Green
Anodized Red
Anodized Yellow
Anodized Orange
Anodized Blue
Product Details
Blowsion Billet Trim Lever
Blowsion Trim Lever - Left hand operated spring loaded trim lever for pump freestyle/freeride tilt or racing trim systems. Ergonomically designed for premium fit and feel whether you are on the waves or on the buoys.
Item #:
03-05-230
Price:
$89.95
Color
Clear Anodized
Black Anodized
Product Details
Blowsion CF Ride Plate - Kenney Lip Ripper - SXR
Unreal. All we can say. Designed with feedback exclusively from Joe, Taylor Curtis and Clay Cullen this is quite simply the coolest ride plate for surf shredding available.
Item #:
KASRCO699
Price:
$239.95
Application
Freeride with reverse D cutout - Air Darin Model
IJSBA Race Version - used by Pro Dustin Motzsouris
Product Details
Blowsion DUAL COOLING Kit- SXR
Kit includes all hardware and detailed installation instructions. Ultra Sano. (NOTE: For Factory Pipe equipped SXR's only-- will not work with OEM Exhaust.)
Item #:
JSUDCOOL
Price:
$33.25
Product Details
Blowsion Flame Arrestors
Multi-Fit 4" round x 2" tall. The Pro Series II Flame Arrestors are constructed from top-quality materials such as aircraft grade aluminum, stainless steel, and a superior quality rubber base.
Item #:
AWAC534272
Price:
$47.95
Color
Anodized Air Forced Yellow
Anodized Air Forced Orange
Anodized Air Forced Green
Anodized Air Forced Red
Anodized Air Forced Blue
Anodized Air Forced Silver
Anodized Air Forced Black
Product Details
Blowsion Full Spectrum Freeride 49AVLT Carb
Exclusive carb made by Full Spectrum for Blowsion. This is the rocket ship behind our Pro Freeriders' airborne launches. Unreal throttle response and performance. We cannot say enough about this carb.
Item #:
01-02-150
Price:
$638.00
Jetting Application
Freeride
Flatwater/Limited
Race Gas/Big Bore/SS
Product Details
Blowsion Krok Kollar
Blowsion Stainless Steel machined Steering Lock nut. Includes stainless binding screw. Prevents standard lock nut torque failure. Not something made in the land of won-tons or available at your local hardware store! Fits all Blowsion and UMI sealed bearin
Item #:
03-05-019
Price:
$28.50
Product Details
Blowsion Kustom Kut-Back Stainless Impellers
Increased acceleration, bottom end hook-up and hi-rev grunt are only a few of the advantages of the revolutionary Blowsion Magnum Hub cut back impellers now being offered.
Item #:
02-04-000
Price:
$267.95
1: Watercraft Model
Yamaha Super Jet - All Years
Kawasaki SXR 800 - All years
Kawaaki 750 SXi and SXi Pro- All Years
Yamaha Fx1- All Years
2: Engine Modifications
Stock to Mild Limited
Mid Level Limited to Modified
Strong Limited- Full Blown Mod
3: Riding Preference
Recreational Flatwater Riding and Freeride Surf
Flatwater Freestyle Only ! Bottom End RIP !!
Racing- Top Speed- Flatwater and Chop Only
4: Impeller Choice
Please supply from entered details and mods !
S-Jet- SKAT TRAK Flatwater/Freeride PN#02-04-101
S-Jet- SKAT TRAK Freestyle/Freeride PN#02-04-100
Super Jet- SOLAS Freestyle/Freeride PN#02-04-112
Super Jet- SOLAS Freeride/Flatwater PN#02-04-113
Kawi 750-Skat 10/18 Freeride/Flatwtr PN#02-04-009
Kawi 750-Skat 9/17 Freeride/Flatwtr PN#02-04-008
Kawi 750-Skat 8/16 Freestyle/Freeride PN#02-04-007
SXR- SKAT TRAK - Flatwater/Racing-PN# 02-04-004
SXR- SKAT TRAK Flatwater/Freeride-PN# 02-04-002
SXR- SOLAS - Flatwater/Racing- PN# 02-04-014
SXR- SOLAS - Flatwater/Freeride-PN# 02-04-010
Fx1 - Bottom End/Mid Range - Surf/Freestyle Only!
Fx1 - Flat Water Only - Good Power- All Ranges
Fx1 - Super Jet Pump Conversion 13/18 - Cut Back
5: Rider Weight
110-125 lbs
125-150 lbs
150-185 lbs
185-200 lbs
200-225 lbs
225-250 lbs
250-285 lbs
285-350 lbs (big kahuna model!)
6. Cut Back Option?
No- please supply in standard impeller format.
Yes- please supply in cut back model. (add $30.00)
Product Details
Blowsion Lightweight Carbon SXR Hull - LTD Edition
After over a year in a development and testing, we are proud to offer the missing link for the SXR enthusiast who misses the feather-like power to weight ratio of the 701 Super Jet, yet loves the dynamic handling characteristics of the SXR's hull design.
Item #:
04-08-001
Price:
$5,500.00
Build Options
Carbon Fiber w/ Hybrid Cloth Construction- 105 lbs
100% Carbon Fiber Only Constrcution- 85 lbs (add $2,000.00)
Product Details
Blowsion Sheathe-Fit PWC Covers
Swaddle your stand up watercraft weapon from the elements and prying hands with our new Blowsion woven and stitched polypropylene covers. Designed with stand-up detail, the Blowsion Sheaths fit even the most modified hull.
Item #:
05-05-011
Price:
$129.95
Ski Model
2003 + Kawi SX-R 800 - Color Black (PN# 06-06-012)
2003 + Kawi SX-R 800 - Color Green (PN# 06-06-013)
1996 + Yamaha SJ - Color Black (PN# 06-06-018)
1992-02 Kawi 750 SXi - Color Black (PN#06-06-015)
2000-04 Polaris Octane -Color Black (PN#06-06-021)
2000-04 Polaris Octane -Color Green (PN#06-06-022)
Product Details
Blowsion Side Exhaust Outlet - Separate
Polished Billet 6061 aluminum. Sanitize the outside of any standup exhaust outlet. Available in thru hull design (pictured) for Yamaha, or flush mount for all Kawis. All stainless mounting hardware included.
Item #:
AWACC150
Price:
$94.90
Style
Kawi - Flush Mount- PART # AWACC150K
Yamaha - Thru Hull - PART # AWACC150Y
Product Details
Blowsion SXR Billet Exhaust Nozzle
This is one super clean exhaust nozzle to clean up and sanitize the rear of your SXR. Function and fit are Blowsion perfect. Vanity rules on these beauties. Available in multiple anodized colors listed.
Item #:
KAALWK537
Price:
$78.60
Color
Anodized Clear (PN# 04-03-208)
Anodized Black (PN# 04-03-201)
Anodized Blue (PN# 04-03-202)
Anodized Yellow (PN# 04-03-209)
Anodized Orange (PN# 04-03-205)
Anodized Red (PN# 04-03-207)
Anodized Green (PN# 04-03-204)
Product Details
Blowsion Tornado Air Forced 2010 Flame Arrestors
New for 2010 these stellar beauties feature a unique design water-deflection cone shape and are 100% designed and manufactured in the U.S.A.
Item #:
01-02-016
Price:
$51.95
Color
Black Anodized (01-02-016)
Silver Anodized (01-02-015)
Product Details
Blowsion Tow Loop - Bow Eye Mount
Easily allows tow watercarft to clip and go. Surf riders and racers are insane to ride without one of these. The ONLY way to effectively guarantee avoiding the next big wave set or the next racer on the course.
Item #:
AWACC42
Price:
$29.95
Product Details
Blowsion Yamaha Exhaust Splitter - Separate
For the do-it-yourself exhaust maker. The key component that cannot be bought at JC Whitney or Home Depot.
Item #:
AWACC149
Price:
$86.50
Product Details
Bow Eye Bushing - Large
Billet aluminum bow eye bushings. Available in anodized Yamaha Blue, Team Green, orange, red, yellow/gold, black and clear.
Item #:
UJS03200
Price:
$12.75
Color
Anodized Orange
Anodized Yellow-Gold
Anodized Team Green
Anodized Blue
Anodized Red
Anodized Black
Anodized Clear
Product Details
Carbon Fiber Hull Extensions - Kawasaki SXR 800
Blowsion hull extensions are constructed of carbon fiber composite. They are epoxy glued and fastened to the back of all years SXR. Minor finish work required- all necessary installation materials are included.
Item #:
KASRCO212
Price:
$239.95
Product Details
Carbon Remote Fuel Pump Bracket
Use this ultra sano 100% carbon fuel pump bracket when adding remote fuel pumps.
Item #:
KASRCO426
Price:
$59.95
Product Details
Carbon Tech Reeds - All Kawi Twins
Carbon Tech Reeds work. Ask Pro Yamaha Rider Nicholas Rius. Not only do they work, they last. Watercraft engines create alot of horsepower very rapidly, and the reeds need to be able to keep up with the demanding motor.
Item #:
AWAC238LT
Price:
$117.95
Product Details
Carburetor Adapter- All Models
Billet carb adaptors in stock and available to fit all OEM and aftermarket carbs. See the drop down list below for model years and application.
Item #:
AWAC2005
Price:
$20.95
Application and Model Year
Mikuni 40mm(2 bolt)98-02 750Pro-All SXR(#01-02-075
Mikuni 38mm(3 bolt) fits-96+SJ (#01-02-074)
Mikuni 44mm SuperBN(4 bolt)-95SJ, FX1 (#01-02-073)
Keihn 40mm CDKII(2 bolt)95-96 750 SXI (#01-02-072) (add $2.05)
Keihn 40mm(2 bolt)- 92-95 750 SX (# 01-02-071) (add $2.05)
Product Details
Chin Pad- Carbon - All Kawasaki 800 SXR, 750 SXi
Lightweight, contour fit carbon-composite construction throughout. Closed cell foam padding with your choice of custom colored "glove fit" Blowsion upholstered chin pad cover included.
Item #:
KASXCO120
Price:
$214.95
Back Color
Vinyl- Red
Vinyl- Orange
Vinyl- Disco Purple
Vinyl- Disco White
Vinyl- Disco Blue
Vinyl- Disco Green
Vinyl- Disco Red
Non Slip- Yellow
NadaHyde- Gray
Non Slip- Silver
NadaHyde- Red
Non Slip- Red
Vinyl- Disco Black
NadaHyde- Black
Non Slip- Black
Vinyl- Yellow 1
Vinyl- Burgandy
Vinyl- Electric Blue
NadaHyde- Blue
NadaHyde- Purple
Vinyl- Yamaha Blue
Vinyl- Kawi Green
Vinyl- Sea Doo Green
Non Slip- Blue
Non Slip- Purple
Vinyl- Disco Gold
Vinyl- Black
Vinyl- Royal Blue
Vinyl- Gray
Vinyl- Magenta
Vinyl- Purple
Vinyl- Silver
Vinyl- Yellow 2
Vinyl- White
Front Color
Vinyl- Black
Vinyl- Royal Blue
Vinyl- Yamaha Blue
Vinyl- Burgandy
Vinyl- Yellow 2
Vinyl- Orange
Vinyl- Sea Doo Green
Vinyl- Disco Purple
Vinyl- Disco White
Vinyl- Disco Green
Vinyl- Disco Red
Vinyl- Disco Gold
Vinyl- Disco Black
Non Slip- Silver
Non Slip- Purple
Non Slip- Blue
NadaHyde- Purple
NadaHyde- Red
NadaHyde- Black
Vinyl- Yellow 1
Vinyl- White
Vinyl- Purple
Vinyl- Electric Blue
Vinyl- Gray
Vinyl- Magenta
NadaHyde- Blue
NadaHyde- Gray
Non Slip- Black
Non Slip- Red
Non Slip- Yellow
Vinyl- Disco Blue
Vinyl- Kawi Green
Vinyl- Red
Vinyl- Silver
Product Details
Chin Pad Cover - Staple On - KAWI 800 SXR, 750 SXi
Staple on replacement covers for stock plastic OEM chinpad backing. Blowsion logo branded. Cannot be used on Blowsion carbon chin pad backings.
Click Here For Color and Material Swatches.
Item #:
KASXUP454
Price:
$45.95
Back Color
Vinyl- Purple
Vinyl- Black
Vinyl- Royal Blue
Vinyl- Electric Blue
Vinyl- Yamaha Blue
Vinyl- Burgandy
Vinyl- Red
Vinyl- Silver
Vinyl- Yellow 2
Vinyl- Sea Doo Green
Vinyl- Disco Green
Vinyl- Disco Gold
Vinyl- Disco Black
NadaHyde- Black
NadaHyde- Gray
NadaHyde- Red
NadaHyde- Blue
Non Slip- Blue
Non Slip- Yellow
Vinyl- Disco Red
Vinyl- Disco White
Vinyl- Disco Blue
Vinyl- Orange
Vinyl- Yellow 1
Vinyl- Kawi Green
Vinyl- Disco Purple
NadaHyde- Purple
Non Slip- Black
Non Slip- Purple
Non Slip- Red
Non Slip- Silver
Vinyl- Gray
Vinyl- Magenta
Vinyl- White
Front Color
Vinyl- Royal Blue
Vinyl- Electric Blue
Vinyl- Purple
Vinyl- White
Vinyl- Kawi Green
Vinyl- Disco Purple
Vinyl- Disco Gold
Vinyl- Disco Black
Non Slip- Yellow
NadaHyde- Black
Non Slip- Black
Vinyl- Disco Blue
Vinyl- Disco Green
Vinyl- Disco Red
NadaHyde- Purple
Vinyl- Sea Doo Green
Vinyl- Magenta
Vinyl- Yellow 1
NadaHyde- Blue
Non Slip- Red
NadaHyde- Gray
NadaHyde- Red
Non Slip- Silver
Non Slip- Blue
Non Slip- Purple
Vinyl- Disco White
Vinyl- Black
Vinyl- Yamaha Blue
Vinyl- Burgandy
Vinyl- Gray
Vinyl- Orange
Vinyl- Red
Vinyl- Silver
Vinyl- Yellow 2
Product Details
Coated Stainless Steel Base Gasket - SXR, SXI 750
The simple to install stainless and reuseable base gasket, simply clean both mating surfaces and install. Trick.
Item #:
KASRAC020
Price:
$24.95
Thickness
Standard
Kaw 0.010"
Kaw 0.020"
Kaw 0.030"
Kaw 0.040"
Kaw 0.050"
Kaw 0.060"
Kaw 0.070"
Product Details
Coupler Dampener For Yam/Kawi and Riva Couplers
Coupler dampener for use with Blowsion billet Yamaha and Kawi aftermarket couplers. Also listed is the Riva oversize Super Jet billet coupler dampener.
Item #:
KASXAC099
Price:
$51.60
Model
For Billet Yam/Kawi Couplers (part no. KASXAC099)
For Riva Couplers (part no. RY3023B) - $44.13 (subtract $2.82)
Product Details
DAKINE Hardware Kit
Now available. Dakine hardware install kit for installing footstraps. Ultra sanitary and leak proof.Available with (pictured) or without epoxy.
Item #:
4300-400-01
Price:
$9.95
Kit Application
Install Kit Minus Epoxy Glue (PT# 04-02-338)
Complete Kit With Epoxy Glue (PT# 04-02-339) (add $8.75)
Product Details
DAKINE ProForm Footstrap
Dakine Freeriding foot straps can be easily adjusted on or off the water for all foot sizes and riders. Great for riders looking for that Joe Kenney or Pierre Maxient wave-shred style of surfriding.
Item #:
4300-300-26
Price:
$20.95
Product Details
DAKINE Supremo and X-Lace Footstraps
Dakine Freeriding foot straps can be easily adjusted on or off the water for all foot sizes and riders. Great for riders looking for that Joe Kenney or Pierre Maxient wave-shred style of surfriding.
Item #:
4300-105-26
Price:
$25.95
Model
Standard Supremo (pictured)
X-Lace 2008 (not pictured)
Product Details
Digger Footwells- Stitched Pocket Inserts
Blowsion innovated and designed Digger stitched pockets are one of a kind. Totally sanitary, they offer the coolest option for wrapping the intricate curves of the Digger Footwell. REQUIRED for use with Blowsion Digger stitched mat kits. Sold as a pair.
Item #:
AWUP401
Price:
$59.50
Color
Black
Product Details
Duckbill - Replacement Rubber ONLY
Replaces your worn rubber. Includes color-matched zip tie.
Item #:
KASRAC110
Price:
$21.85
Product Details
Engine Flush Kit
All metal and stainless construction. Easy to use. Just push in to your 45 degree or 90 degree aftermarket aluminum water bypass(es). Backflush away !
Item #:
AWAC172
Price:
$26.95
Model
Single Bypass Flush Unit - Part # AWAC172
Triple Bypass Flush Unit- Part # AWAC170 (add $25.00)
Product Details
Exhaust Manifold Conversion Adapter
This 6061 aluminum billet exhaust manifold conversion adaptor allows the installer to use the Yamaha Factory Pipe B Limited and B Mod Pipe to be installed on a Kawasaki SXR 800 Motor. Can we say Rippin' power?
Item #:
01-01-060
Price:
$142.95
Product Details
Extended Bow Eye - Long John Silver
Introducing Long John Silver. Extended Length bow eye for those custom install rear mat kick wedges. One extra full inch of thread gurantees plenty of material to nut up to!
Color: Clear and Black Anodized Only
Item #:
04-03-003
Price:
$17.95
Anodized Color
Clear
Black
Product Details
Factory Pipe - SXR Dry Pipe
This exhaust system utilizes the stock waterbox keeping it quiet and IJSBA legal limited. The pipe is fully water jacketed and makes 27 Horsepower on a stock engine over the stock exhaust system when used in conjunction with carb jetting and an ignition a
Item #:
KASRFP08
Price:
$849.95
Product Details
Factory Pipe - SXR Dry Pipe Sleeve-Coupler
Factory Pipe Replacement Silicone Sleeve-Coupler for SXR Dry Pipe. Keep one handy in the toolbox for this commonly-abused sleeve. Updated for 2008 with special new more durable Blowsion Racing Red compound.
Item #:
01-01-602
Price:
$15.95
Product Details
Factory Pipe 800 SXR Wet Pipe
No hood mods required! This is THE Factory Pipe for the freestyle and surf rider looking for the best bottom end grunt for their SXR. Unreal performance and fit. Easy install and tuning.
Item #:
KASRFP10
Price:
$799.95
Product Details
Factory Pipe- B Pipe Coupler
Factory Pipe Replacement Silicone Coupler Fits "A" and "B" Headpipes. Fits all Kawasaki, Yamaha, Polaris Wet pipes. (DIMENSION 4"X 2 1/8") Keep one handy in the toolbox for these commonly-abused and destroyed couplings.
Item #:
01-01-603
Price:
$18.75
Product Details
Factory Pipe- Dry Pipe Coupler
Factory Pipe Replacement Silicone Coupler Fits Most Dry Pipes, Fits Most Kawasaki , Yamaha, Polaris DRY pipes (3 1/2"X 2 3/16") Keep one handy in the toolbox for these commonly-abused and destroyed couplings.
Item #:
01-01-607
Price:
$21.95
Product Details
Factory Pipe Dry Pipe O-Ring Kit
Replacement kit Fits Kawasaki SXI and 800 / SXR Dry Pipes and Yamaha Type 4, FP Dry Pipe O-ring Kit (3-pieces).
Item #:
01-01-617
Price:
$14.95
Product Details
Fire Extinguisher
Fire Extinguisher - Kidde - Standard
Item #:
AWAC135
Price:
$29.99
Product Details
Flame Arrestor - Prok
Flame Arrestor - Prok - Multi-Fit. 4" Round x 2" Tall. Prok's high-flow aftermarket air filters feature an internal vortex-shaped cone and rolled intake edge for the highest, most unrestricted airflow possible.
Item #:
AWAC6585
Price:
$47.95
Product Details
Flow Control Valve
Flow Control Valve- Blowsion stocks both 3/8 adjustable (pro version) and 3/8 non-adjustable Flow Control Valves.
Item #:
AWAC180
Price:
$44.95
Model
Std. 3/8 inch version- Non adjustable
Adjustable 3/8 inch Pro Version - Pt No. 01-01-400 (add $10.00)
Product Details
Flywheel - Lightweight - SXR 800 Charging
Want to feel the bottom end of your SXR snap your neck back? The Jettinetics lightened charging flywheel is the way to go. Retains OEM charging capabilities but lightens the rotating mass for unreal bottom end response. There is no comparison. In Stock.
Item #:
KASRAC211
Price:
$575.00
Web Specials Price: $469.95
Savings: $105.05
Product Details
Flywheel - Lightweight SXR- SXi
Lightened reduction total-loss flywheel for Kawasaki SXR 800 and 750 Sxi. Non charging. This is the same flywheel used by Kommander Industries Steve Webster and Factory Kawasaki.
Item #:
KASRAC210
Price:
$585.69
Product Details
Footwells - Dawson Digger
These hand-laid, molded fiberglass insets provide extended room in the tray of your ski to position your feet. Comfortably sized for average feet (sizes 6-11), these footwells also feature a gentle protrusion over the top of your foot for better locking p
Item #:
AWCO124
Price:
$149.99
Product Details
Footwells - Klowners
Designed especially for the rider who need MAX room in the tray. These hand-laid, molded fiberglass insets provide extended room in the tray of your ski to position your feet. Comfortably sized for large to very large feet.
Item #:
AWCO127
Price:
$149.99
Product Details
Footwells - MacCluggage Mashers
No Cutting of the wide SXR tray required. Designed in conjunction with Pro Kawi rider Chris MacCluggage and Darren Hedlund. Experience the feel of a standard footwell cut out without having to notch out your SXR tray. 100% race legal.
Item #:
AWCO126
Price:
$149.99
Product Details
Footwells - Recreational
The Originals ! These hand-laid, molded fiberglass insets provide extended room in the tray of your ski to position your feet.
Item #:
AWCO123
Price:
$149.95
Product Details
Fuel Control Valve / Hose Assembly
Fuel Control Valve / Hose Assembly. Fits all upright style 5 gallon fuel jugs. Handy hose cap keeps moisture and debris from entering and contaminating fuel during transport or storage.
Item #:
AWAC165
Price:
$19.95
Product Details
Fuel Jug Rack - Dual
Fuel Jug Rack - Dual trailer mounted fuel canister holder.
Item #:
AWAC160
Price:
$122.95
Product Details
Full Spectrum SXR 800/750 Intake Manifold w/ Reeds
The ultimate set up for running dual carbs on your SXR. A fully matched system -- manifold and reed cages all manufactured under the extremely tight tolerances of Boyesen and Full Spectrum.
Carbs sold seperately.
Item #:
01-02-205
Price:
$629.00
Product Details
Handle Bar Clamp Screws
Stainless steel handle bar clamp screws. (4 pack) Fits Blowsion Billet
Bar Clamps.
PN# 03-05-031
Item #:
UJS04401
Price:
$6.50
Product Details
Handle Bar Clamps
Billet aluminum handle bar clamps. Sold as a pair. These bar clamps provide the finishing touch to a clean steering system. Offered in carbon grey anodized only.
Item #:
03-05-024
Price:
$16.50
Color
Carbon Gray Anodized - PN# 03-05-024
Product Details
Handle Bar Grip Billet Cap - ODI Stub Plug
Aluminum Bar End Caps. Replaces your outer set of lock rings and end cap with one sealed and bulletproof billet cap. Billet Anodized Black.
Item #:
GEPALSC
Price:
$17.95
Product Details
Handle Bar Grip Billet Cap - ODI Thug Plug
Black anodized billet aluminum grip cap from ODI. Fits Lock-On grip system. Replaces plastic ODI end that comes with Grip Starter kits.
Item #:
GEPALBLK
Price:
$11.95
Product Details
Handle Bar Grip Replacement - ODI
The RUFFIAN 130mm handlebar grips from ODI feature a solid design with a soft rubber shell for maximum traction and comfort. Pair of black replacement grips only.
Item #:
GH20RFR130
Price:
$19.99
Product Details
Handle Bar Grip Replacement - ODI
The RUFFIAN 120mm handlebar grips from ODI feature a solid design with a soft rubber shell for maximum traction and comfort. Pair of black replacement grips only.The RUFFIAN 130mm handlebar grips from ODI feature a solid design with a soft rubber shell fo
Item #:
GH20RFR90
Price:
$19.99
Product Details
Handle Bar Grip Replacement - ODI
The ROGUE 120mm handlebar grips from ODI feature a solid design with a soft rubber shell for maximum traction and comfort. Pair of black replacement grips only.
Item #:
GH20RGR90
Price:
$19.99
Product Details
Handle Pole- Direct Replacement Alum- SXR and Sxi
AC Racing aluminum handle pole for Kawasaki 750 SXi & SXR 800. Available in Standard Length and Shortened minus 2 inches from OEM stock length.
Item #:
KASXAC141
Price:
$555.00
Finish
Bare Aluminum
Kawi Black (add $125.00)
Kawi White (add $125.00)
Solid Lime Green SXR - 2005-2007 (add $125.00)
Kandy Kawasaki Green SXR - 2003-2004 (add $150.00)
Kandy Red (matches SJ and 2004 SXR 800) (add $150.00)
Kandy Yamaha Blue (add $150.00)
Length
Standard OEM Kawasaki Length
Shortened One Inch
Shortened Two Inches
Product Details
Handle Pole Extension Limiting Rope
Fits all stand up FX 1, SuperJet, Kawasaki SXR 800, 750, 650 & all JS models. Used and tested by Pro Blowsion riders Joe Kenney, Clay Cullen, Air Darin Anderson, Taylor Curtis, Josh Lustic and more.
Item #:
AWAC127
Price:
$41.95
Color
Black Only
Product Details
Handle Pole Spring - Kawasaki SXR 800 / 750 Sxi
Heavy Duty Direct Replacement Pole Spring for the Kawasaki SXR 800 and 750 Sxi. High tension designed to lighten both OEM fiberglass and aftermarket aluminum handlepoles. PN# 03-04-003
Item #:
KA800AC
Price:
$41.95
Product Details
Handle Pole Spring Tensioner - SXR 800
Lighten the arm pump on your SXR Kawi pole. Thanks to the wizard at Kommander Industries you can rail with ease. All mounting hardware and instructions included.
Item #:
03-04-022
Price:
$39.95
Product Details
Handlepole Breather Tubing
24" Length Pole Breather Tubing 2.25" OD. Fits Blowsion, RRP, and other pole brackets.
Item #:
03-04-070
Price:
$22.95
Product Details
Hood Baffle Air Intake - Tube and Flange Kit
Direct water and air to where you want it in the engine compartment! Blowsion Drop Tube and Urethane Flange for Hood Baffle Air Intakes. Use with either aftermarket hoods or stock factory hood to increase air flow.
Item #:
AWCO605
Price:
$46.95
Product Details
Hood Baffle Insert for Factory Pipe
Use this composite drop in baffle insert to cover the area removed during install of the Factory Pipe for the SXR.
Item #:
KASRCO608
Price:
$99.95
Product Details
Hood Baffle Kit -Carbon Fiber- Kawasaki SXR 800
A cost-effective option that allows you to experience the benefit of an improved factory system without the high dollar costs of a complete aftermarket replacement hood kit. Improve engine airflow while almost eliminating water intake.
Item #:
KASRCO607
Price:
$289.60
Product Details
Hood Hooks - Front - SXR
Utilizing our many years of Super Jet Freestyle and surf quality hood hook design experience, these bulletproof SXR billet hood hooks allow for the ultimate abuse of your 2003 and newer SXR on the race course, river or in big surf.
Item #:
KASRAL501
Price:
$76.95
Hood Style
OEM Hood
Blowsion Raptor Freestyle Hood
Product Details
Hood Seal- Kawasaki SXR 800
OEM Replacement Hood Seal all years Kawasaki SXR 800. This direct replacement hood seal is the strongest and most durable seal available.
Item #:
39145-3781
Price:
$41.50
Product Details
Hood Strap Kit
Secure your stand-up's hood to avoid accidental dislodging during freestyle and freeride maneuvers. All stainless mounting hardware and instructions included. Available in Black Only.
Item #:
AWAC125
Price:
$29.99
Color
Black
Product Details
Hydro-Turf Sheet 40" x 62"
Choose from standard molded groove or the new Diamond (pictured) grooved sheets. Available in most colors. You'll probably also want our
Under Mat Foam
for custom cushion.
Item #:
AWUP500
Price:
$59.95
Color Choices
Black
Grey
Snow Camouflage
Blue Camouflage
Orange Camouflage
Yellow Camouflage
Green Camouflage
Tan Camouflage
Blue Wave
Tan
Orange
Wood
Deep Blue
Royal Blue
Light Blue
Teal
Pink
Purple
Deep Purple
Red
Lime Green
Dark Green
Yellow
White
Granite
Black Marble
Blue Marble
Purple Marble
Pink Marble
Groove Pattern
Diamond
Waffle
Straight
Product Details
Hydro-Turf Sheet 40" x 62" - DUAL COLOR !
New dual colors sheets! Pick from diamond and waffle grooved sheets. Available in any two of the color combination Hydro Turf offers.
Item #:
HTSHTDUAL
Price:
$108.95
Color Choice 1
Black/Grey Combo - 69.95 (subtract $39.00)
Black
Grey
Snow Camouflage
Blue Camouflage
Orange Camouflage
Yellow Camouflage
Green Camouflage
Tan Camouflage
Blue Wave
Tan
Orange
Wood
Deep Blue
Royal Blue
Light Blue
Teal
Pink
Purple
Deep Purple
Red
Lime Green
Dark Green
Yellow
White
Granite
Black Marble
Blue Marble
Purple Marble
Pink Marble
Color Choice 2
None
Black
Grey
Snow Camouflage
Blue Camouflage
Orange Camouflage
Yellow Camouflage
Green Camouflage
Tan Camouflage
Blue Wave
Tan
Orange
Wood
Deep Blue
Royal Blue
Light Blue
Teal
Pink
Purple
Deep Purple
Red
Lime Green
Dark Green
Yellow
White
Granite
Black Marble
Blue Marble
Purple Marble
Pink Marble
Groove Pattern
Diamond
Waffle
Straight
Product Details
Impeller Shaft Tool - Kawasaki
Holds spline of driveshaft for removal of impeller. Fits all 1992 and newer Kawasaki models.
Item #:
AWAC35
Price:
$14.50
Product Details
Intake Grate - Deep Top Loader - SXR 800
New for 2005 is the tried and true Jet Dynamics Top Loader design SXR 800 scoop grate. Imitated and copied by many, this Patented Toploader scoop grate design is the best all-around intake grate for the SXR 800 rider who tears up the surf, rips the occasi
Item #:
02-02-010
Price:
$174.95
Product Details
Intake Grate - SXR 800 Maxiloader
Worx
Kawasaki SXR 800 Maxiloader intake grate. Deeply scooped grate for better hook up. Perfectly matched to enable easy installation. Worx PN#WR222.
Item #:
WR222
Price:
$203.05
Product Details
Intake Manifold - SXR 800
Dominator dual 44-48mm Mikuni intake manifold.
Fits OEM reed cages only.
Item #:
231-75146
Price:
$205.95
Product Details
Intake Manifold - SXR 800
Dominator dual 44-48mm Mikuni intake manifold.
Fits Delta Force reed cages only.
Item #:
231-75148
Price:
$236.85
Product Details
KAWASAKI Billet Fuel Cap
Blowsion Billet. Kawasaki SXR 800,440,550,650 all models all years KAWI standups. 750 SX and SXI Pro require fuel door fitting.
Item #:
KASRAC175
Price:
$58.00
Color
Anodized Blue
Anodized Orange
Anodized Yellow
Anodized Black
Anodized Red
Anodized Team Green
Anodized Clear
Product Details
Kawasaki Impeller Flow Control Cone
IMPROVE PUMP EFFICIENCY and increase performance. Make your impeller swaps at the race site or beach quick and easy. Retains pump efficiency by eliminating water flow disruption caused by a missing rubber boot-resulting in maximum performance.
Item #:
02-05-002
Price:
$41.00
Application
Fits All SKAT-TRAK Impellers PN# 02-05-412
Product Details
Kawasaki Motor Mount - All Years 750/800
Why mess around with aftermarket engine mounts that simply will not last. Though expensive, there is no aftermarket motor mount of matched quality. Sold Individually. OEM Kawasaki.
Item #:
92161-3788
Price:
$99.50
Product Details
KAWASAKI Novi Dual 48mm Series III
Included: Novi Dual 48mm Kawasaki 2-maxflow flange carbs with Power Booster, 1 - Rail Connector, 1 - Throttle Cable Bracket, 1- Zero Backlash Coupler, Jetting to your specification and installation Diagram.
Item #:
01-02-124
Price:
$1,435.00
Jetting Application
Freeride
Flatwater/Limited
Race Gas/Big Bore/SS
Product Details
Kawasaki SXR 800 and SXi 750 Engine Keepers
Designed in conjunction (and required) by Blowsion SXR Pro Freerider Air Darin Anderson, and SJ Rider Joe Kenney, our “Kenney Keepers” are a must have for any hardcore surf or flat-water invert artist. Each set contains a left and right side front mount.
Item #:
01-07-511
Price:
$74.95
Product Details
Kawasaki SXR 800 front Bumper
Fits all 2003-2007 Kawasaki SXR 800. Color Black only.
Item #:
39027-3745-6Z
Price:
$46.16
Product Details
Kawasaki SXR/SXi Billet Driveline Coupler Set
Kawasaki billet driveline couplers. Machined from 6061- T6 aluminum for superior strength and durability. Utilizes a Kawasaki style damper which is not only smaller in diameter but also stronger and helps reduce heat buildup in the driveline.
Item #:
UKA04904
Price:
$99.95
Color
Anodized Clear
Product Details
Kawasaki Throttle Cables - SXR, SXi- OEM KAWI
Kawasaki Throttle cables. OEM Kawasaki Brand.
OEM Kawasaki SXR 800 - All Years ( 54012-3773 )
750 SXi /Pro- 97-2002 ( 54012-3753 )
750 SXi - 1996 ( 54012-3748 )
750 SXi - 1995 ( 54012-3743 )
750 SXi - 1992-1994 ( 54012-3732 )
Item #:
54012-3773
Price:
$44.50
Model
OEM Kawasaki SXR 800 - All Years ( 54012-3773 )
OEM Kawasaki 750 SXi /Pro- 97-2002 ( 54012-3753 )
OEM Kawasaki 750 SXi - 1996 ( 54012-3748 )
OEM Kawasaki 750 SXi - 1995 ( 54012-3743 )
OEM Kawasaki 750 SXi - 1992-1994 ( 54012-3732 )
Product Details
Kick Plate - Aluminum
An ultra sano way to keep your rear edge tray mat wrapped and sealed down. Excellent solution to a problem area for all mat installations.
Item #:
AWAL751
Price:
$27.95
Stand Up Model
Yamaha Super Jet/Fx1, Kawi 750- All, PN# 04-02-343
Kawasaki SX-R 800 , PN# 04-02-342
Product Details
Kick Wedge - Hydro Turf
Add a kick tail to your watercraft bottom mat area with this 1" wedge. When installed under the traction mats, some models of watercraft may require an extended bottom mat. Size- 5.5" x 18" x 1" height.
Item #:
AWUPKICK01
Price:
$19.95
Product Details
Kommand Bars- 0 Degree Bend With Crossbar
Blowsion 0 degree extended length Kommander handlebars with crossbar and Blowsion foam pad.
Item #:
HANDLEBAR-0
Price:
$67.95
Color
Anodized Clear - PN#03-05-141
Product Details
Kommand Bars- 4 Degree With Crossbar
Blowsion 4 degree extended length Kommander handlebars with crossbar and Blowsion foam pad.
Item #:
HANDLEBAR-4
Price:
$67.95
Color
Anodized Clear- PN#03-05-143
Anodized Black- PN#03-05-144
Product Details
Kommander 800SXR Billet Cylinder Dome
Replacement dome for Kommander Industries billet cylinder head. Machined from 7075 series aluminum for ultimate strength, these domes are much less prone to cracking over other manufacturers' domes. Sold individually.
Item #:
01-03-DOME
Price:
$81.95
Dome Size
31cc
30cc
29cc
28cc
27cc
26cc
25cc
24cc
23cc
Model
Standard
.030 Limited spec step dome (use .040 base gasket)
.050 Limited spec step dome (use .060 base gasket)
Product Details
Kommander 800SXR Billet Cylinder Head Girdle Kit
Stainless steel girdle hardware kit for JSU and Kommander Industries billet cylinder head.
Item #:
01-03-201
Price:
$81.50
Product Details
Kommander 800SXR Billet Cylinder Head
Bolt on the new Kommander Industries billet cylinder head for unbelievable power gains. Big gains in both acceleration and throttle response. The lid and body are maunfactured from 6061-T6 aluminum and anodized with our special titanium corrosion protecti
Item #:
01-03-002
Price:
$291.50
Add and Extra O-Ring Kit?
No Thanks!
Add one set of extra O-Rings? (add $16.25)
Girdle Option
Non-Girdled
Girdled (add $81.50)
Product Details
Kommander Angled Reed Spacer Kit
Bolt on the new Kommander Industries billet angled intake reed spacer kit. Fits Kawaski 800SXR, 750SX, 750SXi, 750SXi Pro.
Item #:
01-02-351
Price:
$79.95
Add and Extra O-Ring Kit?
No Thanks!
Add one set of extra O-Rings? (add $16.25)
Girdle Option
Non-Girdled
Girdled (add $81.50)
Product Details
Lifter Wedges
Inexpensive option instead of footwells. Gain control of your ski by applying these lifter wedges to you tray sides.
Item #:
AWUP403
Price:
$15.95
Product Details
Mat Kit - Hydro Turf for KAWI SXR Kicker Footwells
Glue On! Includes bottom, sides, dash, and undermat. Also high recommended is the specially formulated
Blowsion Mat Glue
Item #:
KASRUP464
Price:
$129.95
Layout
Replaces stock rail caps (add $30.00)
Fits w/ Blowsion Composite Rail Caps (link above)
Fits w/ stock rail caps (requires custom fitting)
Logo Color
Black
Deep Blue
Royal Blue
Light Blue
Teal
Purple
Deep Purple
Red
Green
Dark Green
Yellow
White
Grey
Granite
Tri Color
Black Marble
Blue Marble
Purple Marble
Camouflage
Side Mat Color
Black
Deep Blue
Royal Blue
Light Blue
Teal
Purple
Deep Purple
Red
Green
Dark Green
Yellow
White
Grey
Granite
Tri Color
Black Marble
Blue Marble
Purple Marble
Camouflage
Tray Mat Color
Black Diamond
Black
Deep Blue
Royal Blue
Light Blue
Teal
Purple
Deep Purple
Red
Green
Dark Green
Yellow
White
Grey
Granite
Tri Color
Black Marble
Blue Marble
Purple Marble
Camouflage
Product Details
Mat Kit - Hydro Turf for SXR Mac Masher Footwells
Glue On! Includes bottom, sides, dash, and undermat.
Click Here For Color and Material Swatches.
Item #:
KASRUP465
Price:
$129.95
Layout
Replaces stock rail caps (add $30.00)
Fits with stock rail caps
Logo Color
Black
Deep Blue
Royal Blue
Light Blue
Teal
Purple
Deep Purple
Red
Green
Dark Green
Yellow
White
Grey
Granite
Tri Color
Black Marble
Blue Marble
Purple Marble
Camouflage
Side Mat Color
Black
Deep Blue
Royal Blue
Light Blue
Teal
Purple
Deep Purple
Red
Green
Dark Green
Yellow
White
Grey
Granite
Tri Color
Black Marble
Blue Marble
Purple Marble
Camouflage
Tray Mat Color
Black Diamond
Black
Deep Blue
Royal Blue
Light Blue
Teal
Purple
Deep Purple
Red
Green
Dark Green
Yellow
White
Grey
Granite
Tri Color
Black Marble
Blue Marble
Purple Marble
Camouflage
Product Details
Mat Kit - Hydro Turf for SXR Mac Masher Footwells
Glue On! Includes bottom, sides, dash, and undermat.
Click Here For Color and Material Swatches.
Item #:
HT-74
Price:
$129.95
Layout
Replaces stock rail caps (add $30.00)
Fits with stock rail caps
Logo Color
Black
Deep Blue
Royal Blue
Light Blue
Teal
Purple
Deep Purple
Red
Green
Dark Green
Yellow
White
Grey
Granite
Tri Color
Black Marble
Blue Marble
Purple Marble
Camouflage
Side Mat Color
Black
Deep Blue
Royal Blue
Light Blue
Teal
Purple
Deep Purple
Red
Green
Dark Green
Yellow
White
Grey
Granite
Tri Color
Black Marble
Blue Marble
Purple Marble
Camouflage
Tray Mat Color
Black Diamond
Black
Deep Blue
Royal Blue
Light Blue
Teal
Purple
Deep Purple
Red
Green
Dark Green
Yellow
White
Grey
Granite
Tri Color
Black Marble
Blue Marble
Purple Marble
Camouflage
Product Details
Mat Kit - Stitched for SXR 800 Kicker Footwells
Glue On! Includes bottom, sides, dash and undermat. Requires use of
Blowsion Rail Caps
Item #:
KASRUP463
Price:
$227.95
Sides/Dash Mat
NadaHyde- Black
NadaHyde- Blue
NadaHyde- Gray
NadaHyde- Purple
NadaHyde- Red
Non Slip- Black
Non Slip- Blue
Non Slip- Purple
Non Slip- Red
Non Slip- Silver
Non Slip- Yellow
Tray Mat
NadaHyde- Black
NadaHyde- Blue
NadaHyde- Gray
NadaHyde- Purple
NadaHyde- Red
Trim
Vinyl- Black
Vinyl- Electric Blue
Vinyl- Royal Blue
Vinyl- Yamaha Blue
Vinyl- Burgandy
Vinyl- Gray
Vinyl- Kawi Green
Vinyl- Sea Doo Green
Vinyl- Magenta
Vinyl- Orange
Vinyl- Red
Vinyl- Purple
Vinyl- Silver
Vinyl- Yellow 1
Vinyl- Yellow 2
Vinyl- White
Product Details
Mikuni Adjusting Screws
Mikuni high- and low-speed adjuster screws with "T" cross bar - extended length. Each kit includes 2 high-speed and 2 low-speed screws.
Item #:
01-02-891
Price:
$51.95
Model
Kawasaki- Mikuni
Yamaha- Mikuni
Product Details
Mikuni Carb Rebuild Kit - Super BN
Complete Mikuni Rebuild Kit for all Mikuni Super BN 38,44,46,48 and 49mm carbs. Genuine Mikuni brand. Not a poor quality aftermarket kit.
Item #:
01-02-009
Price:
$48.95
Product Details
Mikuni High-Volume Racing Fuel Pump
For thirsty aftermarket carbs here is the answer. Genuine Mikuni quality and performance. 18 Gallons/70 liters per hour performance.
Item #:
AWACMHVFP
Price:
$53.95
Product Details
Mikuni Throttle Cable Bracket - Pump Side Mount
Fits Most Yamaha - SuperJet - SJet - 760 701 650 - 6mm or 8mm Throttle Cable.
Item #:
01-02-811
Price:
$25.95
Product Details
Mikuni Zero Backlash Carb Coupler
Zero Backlash coupler for connecting Mikuni BN or SBN Carburetors.
Item #:
01-02-887
Price:
$34.95
Product Details
MSD 90 Degree Boot Kit and Terminals
Each kit includes detailed instructions, two 90-degree boots, and two crimp-on terminals.
Item #:
AWAC8850
Price:
$13.00
Product Details
MSD Boot Retainer Kit
MSD Spark Plug Boot Retainer 13/16 Plug Only. Made from high-temp nylon. Secures the boot to the base of the spark plug. UNREAL for keeping spark plug boots attached during high flying aerials and racing action. 2 per pkg.
Item #:
01-05-605
Price:
$17.50
Product Details
MSD Improved Coil - KAWI/YAM
MSD Part No. 4294. Fits all years Yamaha Super Jet 650/701/760, and Kawi 750Sxi and 800SXR. More juice for your powerplant than any OEM coil can provide. New Updated model for 2010!
Item #:
01-05-012
Price:
$119.95
Product Details
MSD Mini Wire Stripper
MSD Mini Stripper Spark Plug Wire 8.5mm. Designed to be used in a vise and with a single-edge razor blade to strip spark plug wires without damaging the core and to crimp a terminal.
Item #:
01-05-604
Price:
$6.99
Product Details
MSD Saltwater Boot Kit and Terminals
This is THE ANSWER for riders dealing with erratic spark caused by corrosion and exposure to saltwater. Kit includes instructions, two MSD 90-degree boots, MSD plug cap retainers, two crimp-on terminals, vulcanizing tape, and dielectric compound.
Item #:
AWAC3410
Price:
$39.95
Product Details
MSD Total Loss - Kawi SXR 800, 750 SXi
Programmable total loss ignitions allow precise control of timing curve and RPM limit. New digital electronics and waterproof housing provide reliable operation. Powerful multiple sparks ensure complete combustion and will even fire a fouled plug.
Item #:
01-05-200
Price:
$1,589.00
Product Details
MSD Total Loss PICKUP - Yamaha 701/760 Superjet
MSD Part No. 4316 Pick-Up, Total-Loss fits Yamaha 650,701 and 760 Total Loss.
SOLD INDIVIDUALLY.
Item #:
01-05-230
Price:
$65.30
Product Details
MSD Water Filter Inline 1/2"
Made from impact resistant nylon with 1/2” barb ends. A clear bowl and removable filter screen allow easy inspection and cleaning.
Item #:
01-07-106
Price:
$39.95
Product Details
MSD Water Injection Controller
MSD Water Injection Controler Single Channel Variable Programmable (Controler only - NO SOLENOID OR NOZZLE)
Item #:
01-05-608
Price:
$219.30
Product Details
MSD Water Injection Solenoid
Solenoid. The electronic switch that pulses the water to the spray nozzle.
Item #:
01-07-100
Price:
$116.70
Product Details
Multi Fit Lanyard
Lanyard- Multi Fit- Works on all models of PWC except Sea Doo with DESS.
Item #:
07-04-401
Price:
$12.95
Product Details
New Kawasaki 800SXR rear sponson
Manufactured from 6061-T6 Aluminum and anodized for corrosion protection. Supplied with all stainless steel hardware needed for installation. Designed to be a direct bolt on part. This sponson was designed to help with cornering stability and does not all
Item #:
KASRAC307
Price:
$119.95
Product Details
NEW Kawasaki SXR Digital CDI-10R
NEW for 2010! SXR 800 and SXi 750 Digital CDI-10R Igntition. Now featuring 4 different switchable curves, (Stock, Limited and Super Stock) and re-engineered to draw less battery power than its excellent predecessor. PN# 01-04-033
Item #:
01-05-060
Price:
$649.95
Product Details
NEW ODI Integrated End Cap
ODI Lock Ring End Cap Combo- now you can have the anodized bling look all the way through to the end cap. Each kit includes inner lock ring, and outer lock ring/cap w/ hardware.
Item #:
03-05-340
Price:
$26.95
Color
Black
Clear
Yellow-Gold
Orange
Red
Purple
Blue
Green
Product Details
ODI Rogue 90mm With Flange Grip Set
The ROGUE 130mm (no flange) handlebar grips from ODI feature a solid design with a soft rubber shell for maximum traction and comfort. Anodized Clear Locking collars on both sides of the grips keep them securely in place. Black only.
Item #:
GL30RG130NF
Price:
$23.95
Product Details
ODI Rogue 90mm With Flange Grip Set
The ROGUE 90mm (with 3/4 flange) handlebar grips from ODI feature a solid design with a soft rubber shell for maximum traction and comfort. Anodized Clear Locking collars on both sides of the grips keep them securely in place. Black only.
Item #:
GL30RG90FL
Price:
$23.95
Product Details
ODI Ruffian 130mm No Flange Grip Set
The RUFFIAN 130mm (no flange) handlebar grips from ODI feature a solid design with a soft rubber shell for maximum traction and comfort. Anodized Black Locking collars on both sides of the grips keep them securely in place.
Item #:
GL30RF130NF
Price:
$23.95
Color
Black
Pearl White
Product Details
ODI Ruffian 90mm With Flange Grip Set
The RUFFIAN 90mm (with 3/4 flange) handlebar grips from ODI feature a solid design with a soft rubber shell for maximum traction and comfort. Anodized Clear Locking collars on both sides of the grips keep them securely in place. Black only.
Item #:
GL30RF90FL
Price:
$23.95
Product Details
ODI Xtreme Carbon Black Grip Set
NEW Xtreme Grips from ODI. BLACK LIMITED EDITION. While supplies last- these will not be made again!. Starter kits come with Black ODI Lock On Clamps and ODI’s new plastic black Snap Cap end caps.
Item #:
GL30XTGBLK
Price:
$23.95
Product Details
ODI Xtreme Graphite Grey Grip Set
NEW Xtreme Grips from ODI. New Graphite Grey Grip design. Starter kits come with Carbon Silver ODI Lock On Clamps and ODI’s new Snap Cap end caps. These grips feature a tapered knurl pattern that is larger and deeper where you need more traction.
Item #:
GL30XTG
Price:
$23.95
Product Details
ODI Xtreme White Grip Set
NEW Xtreme Grips from ODI. WHITE LIMITED EDITION. Available exclusively through Blowsion only. Starter kits come with Black ODI Lock On Clamps and ODI’s new Snap Cap end caps.
Item #:
GL30XTGWHT
Price:
$23.95
Product Details
OEM Ignition Coil - KAWI/YAM
Fits all years Yamaha Super Jet 650/701/760, and Kawi 750Sxi and 800SXR. The preferred choice for replacement coils in both Yamaha and Kawasaki engines. Great performance at an affordable price.
Item #:
21121-3713
Price:
$73.69
Product Details
OEM SXR Hood Air Intake Block Off Kit
The easy solution to water slamming it way into your OEM SXR hood. This trick block-off kit will allow you to stop ingression of water into the engine compartment, thus limiting the damage caused by racing in rough conditions, wave jumping, submarines e
Item #:
03-04-001
Price:
$24.95
Product Details
Oil - Maxima 927, Super M and K2 - 5 Galllon
Oil - Maxima 927, Maxima Super M. and Maxima K2 Five Galllon Pails. Save BIG money and buy in quantity !
Item #:
AWAC150
Price:
$229.50
Oil Choice
Maxima Super M - PN# 06-03-011 ($229.50)
Maxima K2 Oil - PN# 06-03-021 ($299.95) (add $70.45)
Maxima 927 Castor- PN# 06-03-001 ($299.95) (add $70.45)
Product Details
Oil Block Off Plate- Kawi 750/650, Yamaha 701/760
Oil block-off plates allow for an easy conversion from factory oil injection to pre-mixing your own fuel. Block-off plates fit Yamaha 701/760 and Kawasaki 650/750. Hardware included. Anodized clear.
Item #:
UPR06100CLR
Price:
$10.95
Product Details
Oil/Fuel Mixing Cup - Ratio Rite
Ratio Rite - Fix/Oil Mixing Cup
Item #:
AWAC154
Price:
$8.98
Product Details
One Way Valve - Valve Only
Seperate valve assembly only. Great for secondary dump tubes.
Item #:
AWCO160
Price:
$29.90
Product Details
One Way Valve Drain Kit - Pump Dump
Included with explicitly detailed instructions, the kit includes: one way valve and fiberglass tubing for the best adhesion to the hull. Water exits into pump cavity.
Item #:
AWCO162
Price:
$99.95
Product Details
