New products

Designed to fit RRP Standard Steering System.

RRP Superjet steering rebuild kit includes roller bearing, thrust washers, thrust bearing, and large and small O-rings. Fits all RRP steering systems. PN# 03-05-069

JP Retro is back for 2012. We have just gotten our full inventory in! Order before it is gone as there will be no more Retro stock available from JP in 2012.

JP Retro is back for 2012. We have just gotten our full inventory in! Order before it is gone as there will be no more Retro stock available from JP in 2012.

Lighten that pole and lower arm fatigue.Fits all years JS Model 650. Now available again!

Bolt on the new Kommander Exhaust Routing Kit. Fits 1100/1200 Kawi Triple Conversions.

PN# 01-04-160 1996-2002 Kawasaki Sxi 750 and Sxi Pro Stator 2003 Kawasaki SXR 800 Stator PN# 01-04-161 2004-2012 Kawasaki SXR 800 Stator

Bolt on the new Kommander Triple base gasket spacer. Fits 1100/1200 Kawi Triple Conversions.

Bolt on the new Kommander Industries Triple Down Draft Intake Manifold. Fits 1100/1200 Kawi Triple Conversions.

Bolt on the new Kommander Industries Triple Side Draft Intake Manifold. Fits 1100/1200 Kawi Triple Conversions.

Bolt on the new Kommander Industries billet intake reed spacer kit. Fits 1100/1200 Kawi Triple Conversions.

Convert your SXR into a fire breathing race ski with the Kommander 1100/1200 Billet Triple Aluminum Head & Domes, Fits all 1100/1200 triple Kawasaki motor engine swaps. Uses all stock hardware. Choice of three domes included with purchase.

Replacement O-Ring Kit for the Kommander triple cylinder 1100 Billet head.

1100/1200 Triple Kommander Head Replacement Domes. Sold Individually.

Blowsion standard size and oversize stainless screw kits. Replace those always corroded and plugged FP water adjusting screws!

Brand NEW 2012 Blowsion LWDE ski is ready to load and rip!

Yamaha OEM 144mm Pump Impeller Housing. Fits all years Yamaha Super Jet and Blaster with use of standard length driveshaft.

Heavy Duty Replacement Silicone Sleeve-Coupler for SXR Dry Pipe. Includes stainless clamps.

SOLAS 144mm Magnum Pump Stator. Twelve Vane Standard. Fits all years Yamaha Super Jet and Blaster with standard length driveshaft.

Cold Fusion Billet Kawasaki Flywheel Lock

The Ballistic Performance Components EVO2 Battery Management System Balance Charger is the only charger on the market designed specifically to work with the Ballistic Performance Components EVO2 battery. The primary advantage to the Ballistic Performance Components BMS Blance Charger is the balance charging function.

Now Available Bare Naked from Blowsion. These FR-2 matte-finish white hulls are rare, in stock and can ship immediately!

Choose from three Blowsion Front Cover options shown when converting over to a yamaha pole conversion.

RRP Adjustable Footwell Binding System.

RRP Rear Mounted Lo-Pro fuel cell. Fits all RICKTER model stand up watercraft. 5.85 liters (1.55 gallons) fuel capacity. Offset mounting allows for more inertia in triple lindy backflips!

Billet aluminum air Intake fitting for side and top air intake systems. Extruded design allows hose to easily slid on yet be snug for air flow without leaks.

In stock and ready to ship. DASA Power Valve 1050cc. Complete short block.

We picked up this almost brand new 2006 Yamaha Super Jet last year from a local inland customer that had put more garage hours on it than riding time! Dont miss out.

Blowsion Phaded-Out Sport-Tek® Colorblock Sport-Wick® Crew. Look to our Dry Zone Colorblock Crew for moisture-wicking, odor fighting performance. This limited edition new Crew shirt is made from a flat tricot micropique for smooth, snag-resistant wear.

Blowsion Phaded-Out Sport-Tek® Colorblock Sport-Wick® Crew. Look to our Dry Zone Colorblock Crew for moisture-wicking, odor fighting performance. This limited edition new Crew shirt is made from a flat tricot micropique for smooth, snag-resistant wear.

Blowsion Drip-Star Sport-Tek® Side Blocked Micropique Sport-Wick® Sport Polo. This limited edition new sport shirt is made from a flat tricot micropique for smooth, snag-resistant wear. Originally created only for Blowsion staff and Pro riders, due to popularity we have made them available to the public for a limited edition run.

Blowsion is an Authorized US and Intl Distributor for RRP Products.

Taking a virtually brand new 2005 Yamaha Super Jet from stock, we carefully enlarged the tray for maximum foot placement and movement, reinforced the hull throughout and massaged the hull and JK hood kit into the painted "Patriot" beast you see here.

Brand NEW 2012 Blowsion Rickter FR2 Ready to ship and rip!

This lean mean Stock Class SXR racing machine was built for the return of the UK's top Pro Ski racer Jordan Fielder to World Finals racing again in 2011.

New for PWC riders demanding the lightest and strongest battery manufactured is the Ballistic Performance Battery. Weighing ONLY an unbelievable feather light 2.5 lbs and 30% smaller than the stock YUASA battery this battery has set the bar in PWC performance.

Are you proud of the surf crusties you endure? Want to prove to the flat water posers what gnarly set of Salty Nutz you are worthy of?

155 mm oversize aluminum replacement intake duct. Fits all years SJ and Blaster.

Blowsion OGIO® Limited Edition Wicked Weight Full-Zip Jacket. Features a zip-through cadet collar and OGIO details, this seam-sealed waterproof jacket is a wicked cool way to stay dry! Front and Back Blowsion embroidered logos.

These are Arai factory GP6 helmet model shields put through a complex series of treatments to produce the final coated product.

These are Arai factory GP5 helmet model shields put through a complex series of treatments to produce the final coated product.

For use with all Runabout watercraft handlebars. Made from high-density extremely lightweight foam to reduce rider injury from steering component area. Wrapped with Power Wash Proof permanent logo graphics. Pad measures 8.25 inches in length.

Designed by the billet masters at DASA, this 6061 billet single intake manifold incorporates a "tipped or directional" reed design without the need of a spacer plate.

With an ode to the surf classic Endless Summer you can wear this stellar limited edition Fistful of Foam Mens Tee with pride.

Are you proud of the surf crusties you endure? Want to prove to the flat water posers what gnarly set of Salty Nutz you carry?

Buy a set of CF motor mounts for your SJ or Rickter in conjunction with our Kenney Keepers and you will never wear out another mount again! Sold Individually

Tie Down Pin is designed for all PWC with front or rear bow eyes. A simple way to tie down your PWC, tow a water toy (or skier), another boat, even to help winching in the PWC or attach a docking line!

Fits all 1991 - 2011+ Superjets. Blowsion Lightweight Aluminum Yamaha Super Jet Intake Grate.

This hull pictured is available and in stock!. This visual carbon Rickter hull is a beast and a visual treat. Interior reinforced by the Blowsion crew to survive Freeride and Freestyle abuse.

ODI has enlisted the help of our good friends over at Troy Lee Designs to help put an artistic spin on a quality design. After hundreds of drawings and designs, what has been developed is one of the most innovative ODI grips yet...

NOW Available in silver, black, red, blue, green and orange Blowsion anodized! These stellar new beauties feature a unique design water-deflection cone shape and are 100% designed and manufactured in the U.S.A. Sold each.

From the mushy yet brilliant craniums of the Blowsion Freeride think tank, we proudly present Fistful of Foam, a Blowsion Trick Tips Odyssey. Join World Champion Pro Freeriders Ross Champion as he takes you from the very basic freshman effort of setting up your watercraft for surf carnage survival on to the extreme end of the latest and greatest aerial combination superman flips, backdoor barrels and more.

Made for Blowsion by Bell, these extremely light weight freeride helmets are perfect for giving your head that extra little bit of protection while you work the kinks out of your aerial maneuvers.

Glue On! Fits all years 96 newer Yamaha Super Jet. Includes bottom, sides, dash, footwell pieces, and undermat.

Glue On! Includes bottom, sides, dash and undermat. New design--no stitched pockets needed !
Click Here For Color and Material Swatches.

Handlepole Pivot Bolt Bushing for UMI alminum handlepoles. Fits all years.

Designed with Ultra High noise transducers. Plugs directly into Driver Helmet. Includes carrying case.

4 Conductor Coil Cord- Used mostly in sports car racing. IMSA, Grand-Am, SCCA, etc.

This high performance noise canceling microphone is an essential part to any helmet kit. Cancels out all background and engine noise to provide clear communication from the driver to crew and more.

The RUFFIAN 130mm Black (no flange) handlebar grips from ODI feature a solid design with a soft rubber shell for maximum traction and comfort. Anodized Black Locking collars on both sides of the grips keep them securely in place.

Use this link to place a special order item, or submit your billing credit card information on secure order with us thru our SSL secure web cart. Enter address and billing details and we will contact you via email shortly with updated PDF Quote and Freight options if applicable. Nothing will be processed or billed until a confirmation reply is recieved from you. Thank you!

Finish the look of your engine compartment with Blowsion specialty colored 1/8 inch fuel and cooling line. Quntity is sold by the foot.

Finish the look of your engine compartment with Blowsion specialty colored 3/8 inch fuel and cooling line. Quntity is sold by the foot.

10 color combos to choose from. These are not cheezy vinyl. Full screen-printed die cuts with UV protective clear. Show your vanity! 4.5 inch width.

Billet Go-Pro Heavu Duty Ball Mount Camera Cage Kits.

Boyesen Pro Series Reeds fit both the Yamaha and Kawasaki Full Spectrm perfomance intake manifolds.

Available for a limited time only exclusively thru Blowsion!
ODI Ruffian 130mm Length Half Waffle No-Flange Lock-On Grip System Starter Pack -Limited Edition (RED).

Jettribe Yamaha Super Jet Cover. Fits all 1996 to current Yamaha Super Jets. No more cover flapping on the freeway.

RRP Carbon Chin Pad. Racing Scoop Model Carbon Fiber construction.

Trying to improve on an already amazing product? The new Tubbie Destroyer sponson design is simply the Ferrari of the Blowsion original Tubbie Freeride sponsons. Built and shaped specific to the unique hull shape of the Kawasaki 750 Sxi and Sxi Pro.

Blowsion is pleased to announce that we have received the limited edition version of the 2010 quakysense World Finals DVD.

Kit includes all hardware and detailed installation instructions. Ultra Sano. (NOTE: For Factory Pipe equipped Yamahas and Polaris only-- will not work with OEM Exhaust.)

For Use With SKAT TRAK Setback Magnum Pump - Fits 2008 and Newer Yamaha Super Jet Setback Magnum Pumps.

For Use With SKAT TRAK Setback Magnum Pump - Fits 2007 and Older Yamaha Super Jet Setback Magnum Pumps.

This dual channel recessed bottom design plate is a premium design flatwater performance plate for 2007 and older SJ's, or as a racing plate on the 2008+ Super Jet.